MLCT Crony - Need your input!
-
Wow!!! :o
That sounds mighty ambitious Dough! What will you use for a lens on the magnifying glass?
-
I'm going to try and find a cheap glass lens, just a simple double convex glass lens. What my plan is is to cut a hole the size of the lens about 3/4 through the sheet metal. Then insert the lens, and place a ring of metal with an OD equal to the lens, and an ID about 1/8" smaller than the OD on top of the lens. This will be made to proper thickness so everything will be completely flush. It will be tac welded and ground smooth.
-Dough
-
more power 2 ya there Dough

-
:)
-
oh man oh man,im soo intrested to se the results

-
Selfish plug....I'm going to be putting alot of time and some money into the development and production of a small run of these. If some people are interested, I might be able to sell some for a reasonable price. If you guys are gracious for the project, I could offer a slight additional discount for a recomendation in quaksters charge giveaway thread ::) >:D
lol. I was real interested in that charge, but unfortunately nobody knows me well enough to suggest me ;)-Dough
-
I might be convinced to know you better in the future should you send me each and every prototype. :D
-
u dont reply any pm´s man :o :o :o :o :o???? :D
-
What are you talkin about? I replied to you, and you replied back saying you were making a drawing...i'm still waitin on the drawing lol. Lookin forward to seeing your design.
-Dough
-
oh ok,i sent u lihnk to drawing i have screwed up the "send" then,sorry :-\

-
Sounds like an interesting project, I might want to pick one up when they're made. Any way to add a ruler in both metric and imperial?
-
Unfortunately I dont really have any way to print onto the metal or anything. I could, however, simply scribe in some measurements, such as a scale with 1/8" incriments on one side and some form of metric on the other.
-Dough
-
That would do, and should last longer. GL and can't wait for pic.
-
@DoughDTD said:
Unfortunately I dont really have any way to print onto the metal or anything. I could, however, simply scribe in some measurements, such as a scale with 1/8" incriments on one side and some form of metric on the other.-Dough
say,does the wrench fit 15mm nuts?if it does,its just awesome IMO for my needs atleast,maybe even for Mikes :D
-
I might be able to make it with a big enough wrench for 15mm, but that will be close to the maximum size that will work. Anything bigger than that would probably be useless in a tool this small anyway.
-Dough
-
yep,it doesnt have to be any larger i think,if id get a word for it.in my use,the 15mm wrench is very useful,and it does not have to be with great leverage either,just some few inches,to tighten and loose nuts of bicycles axle nuts.
i carry this one with just this task,its some 3,5 " long overall,if not even shorter.


-
A wire stripper can be useful as well.
-
Wire stripper will be integrated into the nail puller... the v will be sharpened to allow for wire stripping or cutting.
-Dough
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

::)