Shop projects
-
-
Neat idea there Tony.

-
Thanks Mate,
I wanted to make one for sometime but needed the right container 
Hetty might not be powerful enough as she get quite warm

Oh, and the CD case cut in to the top is because I wanted to see what was going on inside :ahhh :D
-
@Sparky415 said:
Thanks Mate,
I wanted to make one for sometime but needed the right container 
Hetty might not be powerful enough as she get quite warm

Oh, and the CD case cut in to the top is because I wanted to see what was going on inside :ahhh :D
Hey, if it's good enough for Dyson then I can't criticize. :D
-
I sometimes wonder why I keep all this crap

After trying some leather-work for a sheath I decided I needed a proper press,
so …
Square up edge of leftover kitchen worktop

I think I need a new blade in my chop saw ::)

Hit metal parts with a big hammer :D

Jam a piece of 6.8mm drill in the end of the clamp ;)

More or less sorted :D
-
Love it

-
Thanks Guys

From the Mora Club thread
Thanks

Made a button from a 4mm copper leather rivet and washer (on top of the steel at the back of the picture) with a piece of old leather belt ;)
That works but its a bit of a tight fit

(The white thing in my hand is a belt covered with baking paper)

To be honest copper is a bit soft for this project and the edges are a little sharp

Would be nice little job for someone to make on a lathe

-
As I follow some woodworking pages on facebook there seems to be a rash of "shop projects" in my suggested feed, which is fine, but lately I've noticed a lot of them are using the same tool fixings they are intending to build (IE tablesaw, drill press, scroll saw, etc) to build the same very diy fixings.

Given I have no space for a proper workshop it's very tempting to get one of those allinone multifunction setups for minor projects. (like this:)
https://www.youtube.com/watch?v=0mNptklwylc -
A fleshlight for knives?

Sadly only an inch an a half wide so it’s a bit on the small side

;)

Spoiler:
:D :D :D :D
-
@Whoey said:
As I follow some woodworking pages on facebook there seems to be a rash of "shop projects" in my suggested feed, which is fine, but lately I've noticed a lot of them are using the same tool fixings they are intending to build (IE tablesaw, drill press, scroll saw, etc) to build the same very diy fixings.
There are a couple of solutions. Renting tools is fairly easy and many people (me included) have sporadic opportunities to use well equipped workshops, in my case my father's or grandfather's but they are 250 and 500 km away respectively. There is also a number of workshop clubs where you pay a membership fee to user their tools.
Or possibly the authors are just lazy, that's probably the more likely case.
-
A fleshlight for knives?

Sadly only an inch an a half wide so it’s a bit on the small side

;)

Spoiler:
:D :D :D :D
That took you sooooooooo long :P
:D
-
Cool bunch of projects Sparky

How did I miss this thread ??? It didn't show up in my unread threads either

Well I have seen it now and am glad to have seen it :D
-
Thanks very much Mate,

Everyone is welcome to add to it and show what they are doing in their workshops

-
@Sparky415 said:
Thanks very much Mate,
Everyone is welcome to add to it and show what they are doing in their workshops

I usually don't do much this time of the year after work cause the dark doesn't seem for workshopey to me (it is dark when I get home in the evenings) I have lights in my garage but rather the sun be out at least for a while when doing a project :D I will start doing projects this Spring more cause I get in the mood to do stuff like that then

-
As I follow some woodworking pages on facebook there seems to be a rash of "shop projects" in my suggested feed, which is fine, but lately I've noticed a lot of them are using the same tool fixings they are intending to build (IE tablesaw, drill press, scroll saw, etc) to build the same very diy fixings.

There are a couple of solutions. Renting tools is fairly easy and many people (me included) have sporadic opportunities to use well equipped workshops, in my case my father's or grandfather's but they are 250 and 500 km away respectively. There is also a number of workshop clubs where you pay a membership fee to user their tools.
**
Or possibly the authors are just lazy, that's probably the more likely case.**Probably, it irks me that they are "fixing" a solution where you should not have the means to do it in that manner.
-
@Whoey said:
As I follow some woodworking pages on facebook there seems to be a rash of "shop projects" in my suggested feed, which is fine, but lately I've noticed a lot of them are using the same tool fixings they are intending to build (IE tablesaw, drill press, scroll saw, etc) to build the same very diy fixings.
Given I have no space for a proper workshop it's very tempting to get one of those allinone multifunction setups for minor projects. (like this:)
https://www.youtube.com/watch?v=0mNptklwylcWhat you need is an old Shopsmith. The models from the 50's are almost indestructible and it is still possible to find parts. (At least it is on this side of the Big Pond.)
-
I'm actually tempted to a more dremel based setup, since I really do not have space, and anything must be gathered up and stored away. Also it's unlikely I'm going to do any large scale projects here. As mentioned, that may involve rental or similar.
-
We have a thing called Men's sheds association here in the UK that sounds like a good idea, you can go along and use equipment and get help working on tools there :tu:
I don't know if you have anything like this where you are Whoey :think: -
I well understand your lack of space issues, but there is still a tool solution. You are correct. Shopmiths are too large. You need a Porta Shop!
This is the electric multi tool that might meet your needs!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login










