Dullish blade. How to sharpen it and not ruin the edge?
-
So... My knife's blade is kinda dull. It won't slice paper anymore, it's more if ripping the paper. Now, let me be clear and say that I have zero experience with sharpening. The most I've done is using a mug to resharpen my lil' Classic with mediocre results.
I know that a pull through sharpener will probably ruin the blade, and I probably will do the same with a whetstone so... Tips? I might try to do it and if I can't maybe I'll get it to a locksmith. Anyway if any of you guys have any tips on how to sharpen it, I am all ears!
Thanks

-
If you don't feel confident freehand sharpening there are several guided sharpening options. I currently use a Spyderco Sharpmaker and am happy with it. Lansky also makes a good sharpening set. Either of these two would be more than adequate for a SAK.
-
That would indeed be perfect but the thing is: I got no money, plus parents don't like my SAK (yeah I'm a teenager) so buying a sharpener is a no go.
Sent from my iPhone using Tapatalk
-
Well, if you have a whetstone and are just a little crafty, you can construct a jig to hold the stone itself at the angle of you choosing. Then just drag you blade straight down it, esentially making your own Sharpmaker.
-
That's a great idea! I can get the angle by folding a square piece of paper and use that as a reference to put something under the stone at the right angle... Or just use the angle meter or whatever on my phone...
SAK's are supposed to be sharpened at 20 degrees, right?Sent from my iPhone using Tapatalk
-
You can also start by taking a permanent marker and mark each side where you'll be sharpening. As you start to sharpen, the marker will tell you whether your angle is too high or low compared to original. It takes practice, don't be afraid to mess up. I practiced many moons ago on a cheap paring knife. Hold the blade vertical (90 deg.), Half of that is 45 deg. Half of that is 22.5 etc. You'll develop an eye/feel for the angle.
-
@WolfyW said:
You can also start by taking a permanent marker and mark each side where you'll be sharpening. As you start to sharpen, the marker will tell you whether your angle is too high or low compared to original. It takes practice, don't be afraid to mess up. I practiced many moons ago on a cheap paring knife. Hold the blade vertical (90 deg.), Half of that is 45 deg. Half of that is 22.5 etc. You'll develop an eye/feel for the angle.This......

-
Good advice above already
Good luck on your sharpening endeavor

-
@WolfyW said:
You can also start by taking a permanent marker and mark each side where you'll be sharpening. As you start to sharpen, the marker will tell you whether your angle is too high or low compared to original. It takes practice, don't be afraid to mess up. I practiced many moons ago on a cheap paring knife. Hold the blade vertical (90 deg.), Half of that is 45 deg. Half of that is 22.5 etc. You'll develop an eye/feel for the angle.This is good advise. If you need more try google search for instinctive knife sharpening. It's a video I dod a few years back on freehand sharpening. I'm the guy in the gray flat cap.
-
Thanks a lot people! All your tips will be very helpful! Thanks!
Sent from my iPhone using Tapatalk
-
All of the advice above are great. You are in good hands. Sometimes you just have to dive into it. And with a SAK you can always resharpen for corrections. Paper is your best friend to test for sharpness. I would just add that a dull edge will appear shiny so just stop once in a while and check that edge.
-
Okay, since nobody asked, I will. Why would you take a knife to a Locksmith??

-
Hah! Same in the Philippines. The guy would pedal on his bike to spin the sharpening stone.
-
You can also start by taking a permanent marker and mark each side where you'll be sharpening. As you start to sharpen, the marker will tell you whether your angle is too high or low compared to original. It takes practice, don't be afraid to mess up. I practiced many moons ago on a cheap paring knife. Hold the blade vertical (90 deg.), Half of that is 45 deg. Half of that is 22.5 etc. You'll develop an eye/feel for the angle.
This is good advise. If you need more try google search for instinctive knife sharpening. It's a video I dod a few years back on freehand sharpening. I'm the guy in the gray flat cap.
Spot on Wolfy

Nice little video CB


-
Okay, since nobody asked, I will. Why would you take a knife to a Locksmith??

Don't know about Brazil (where OP is from), but here in W-Europe, alot of locksmiths also repair shoes and sharpen knives/scissors. So it's not that strange. ;)
Exactly. I'm just afraid the guy will ruin the blade hahaha
Sent from my iPhone using Tapatalk
-
I wouldn't let some locksmith or other guy sharpen my knife. First, it's so easy to do with a SAK, second I've seen too many of these guys who over do it and do indeed damage the knife.
Any soup bowl or coffee mug with an unglazed ring on the bottom can sharpen a SAK. A stropping on the back of an old leather belt after will put a shaving edge on it. Learning to do it yourself will give you a sense of independence that is priceless. Any smooth stone out of a creek will do. The underside of the top of a toilet tank can be used. A piece of 500 grit sandpaper on a mousepad can be used. One thing you don't need is one of those over priced and over hyped sharpening gizmos that they sell, not to sharpen knives, but to get your money out of your wallet and into theirs.
-
Lansky 4 Rod Ceramic Turn Box Knife Sharpener is the easiest way to go for someone new at sharpening.
You'll have your choice of 2 diamond rods and 2 ceramic rods or 4 ceramic rods, depending on which model you choose.
Just hold the knife vertical and draw down wards.
-
This is what I use

If you want to be creative and save money just buy a small sharpening stone like the fallkniven DC4 and use an old leather belt for stropping. Also you can use the bottom of a coffee mug and then use a leather belt for stropping. On youtube you can find tips and howtos.
Sharpened the blade of my 1947 Soldier today. The shape of the blade isn't perfect but to make it look perfectly straight and free of chips I would have to remove too much of the blade.
It is shaving sharp though.

While I was busy I also sharpened the kitchen cutlery :D
-
@glenfiddich1983 said:
This is what I use
If you want to be creative and save money just buy a small sharpening stone like the fallkniven DC4 and use an old leather belt for stropping. Also you can use the bottom of a coffee mug and then use a leather belt for stropping. On youtube you can find tips and howtos.
Sharpened the blade of my 1947 Soldier today. The shape of the blade isn't perfect but to make it look perfectly straight and free of chips I would have to remove too much of the blade.
It is shaving sharp though.

While I was busy I also sharpened the kitchen cutlery :D
It's amazing how those things last... Heck it's almost as old as my grandfather and in better shape than he is
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login