Show off your Sak mod's!
-
Thought I'd try carrying a Leatherman Squirt PS for a little while. But knew I'd miss the T&T from my usual SAK, which lately has been the Executive to which I added a bottle opener from a Rambler.
So I built a T&T caddy of plastic, and folded/soldered a brass tube for a sleeve.
It also goes handsomely with a knife made of remnants of the aforementioned Executive build, a slim, brass clad Exec minus the peeler and file.
-
I'm pretty proud of this. It's my bottle-opener-augmented Executive with a silver deep pocket clip.
I excavated the back of the scale to admit the tang of the clip, and then attached the scale in the usual way, pinning the tang between the scale and the liner.
To ensure a tight fit, I dissolved some of the excavation shavings in a couple drops of MEK to form a plastic paste, and swabbed the rivet recesses in the scale with that before squeezing the scale back onto the knife body. Clamping, heating with a blow dryer, and letting sit overnight followed to ensure a good set to the plastic.
Still, I can think of better ways to secure the clip, like soldering it to the liner, or cutting a custom liner with a long tongue that gets bent over to become the clip.
-
@Bob Wolfson said:
I'm pretty proud of this. It's my bottle-opener-augmented Executive with a silver deep pocket clip.I excavated the back of the scale to admit the tang of the clip, and then attached the scale in the usual way, pinning the tang between the scale and the liner.
To ensure a tight fit, I dissolved some of the excavation shavings in a couple drops of MEK to form a plastic paste, and swabbed the rivet recesses in the scale with that before squeezing the scale back onto the knife body. Clamping, heating with a blow dryer, and letting sit overnight followed to ensure a good set to the plastic.
Still, I can think of better ways to secure the clip, like soldering it to the liner, or cutting a custom liner with a long tongue that gets bent over to become the clip.

Awesome work!! -
@FInixNOver said:

Awesome work!!Thank you!
-
I'll finally join in on the fun here with something more substantial than a scale swap. This knife started its life as a discounted Huntsman but the scissors got reground to fit in my EDC and since then it's been a pile of parts.
I gifted a Classic to a friend for her birthday recently but when she had a walk in the woods planned she asked me for something a bit bigger.
Spoiler:
That's what she said...
I handed her a Ranger and after that she wanted something for herself. So I built a Camper from what I had laying around.The peening is not very good and I had really made a mess of things when I disassembled the knife but I plan on epoxying the scales anyway so I don't mind so much. The snap is there as well so I hope the recipient will be happy

Would love to see some pics of it
Even if it is finished product only shots

I threw this picture up in the Spirit Challenge but there wasn't much to it really. All the parts where there and I only had to place them properly (it helped that I photographed the taking apart stage). I bought a cheap 100g ball peen hammer and took my time checking for gaps (by wiggling the tools slightly). Highly recommended for anyone who finds themselves with too many tools n their SAK really.

Thanks for that 42

-
@Bob Wolfson said:

Awesome work!!Thank you!
Good looking work Bob

-
New page banana man dance

-
@timganev said:
The parcel hook is also pry bar/ flat screwdriver /post/1365950
The corkscrew was replaced by awl.
Other tools: scissors, blade and... fork
I do not know if it's feasible.
But there is little to be something to do on the heel of the hook to avoid the right left movement.The mod is nice the fork makes smile
-
Not mine but pretty sweet. I don't think I saw this one over here.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@WWW said:
Not mine but pretty sweet. I don't think I saw this one over here.- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Pretty cool mod on that SAK :o :like: :like:
-
Hello,
wanted to make interchangeable scales from wood for my Executive. A change of the liners was necessary, now they are from thick brass, the scales are screwed on. They are of Red Shisham.


-
@Sunshineinwinter said:
Hello,wanted to make interchangeable scales from wood for my Executive. A change of the liners was necessary, now they are from thick brass, the scales are screwed on. They are of Red Shisham.


Those are awesome looking Sunshine :o

-
-
@hiraethus said:
I recently traded a Grand Prix mod with Gareth but decided I missed it so built another.

Used a file spring that can accept a back tool and fitted the flat driver instead of the chisel. No nail file hook on this one, unfortunately.Love this! I've been considering buying an actual vintage Grand Prix (with the fine driver on the back of the file, it won't have the hook, though), really like the tool combo on this
-
I recently traded a Grand Prix mod with Gareth but decided I missed it so built another.

Used a file spring that can accept a back tool and fitted the flat driver instead of the chisel. No nail file hook on this one, unfortunately.Love this! I've been considering buying an actual vintage Grand Prix (with the fine driver on the back of the file, it won't have the hook, though), really like the tool combo on this
+1 That is a really nice mod Hi

-
I recently traded a Grand Prix mod with Gareth but decided I missed it so built another.

Used a file spring that can accept a back tool and fitted the flat driver instead of the chisel. No nail file hook on this one, unfortunately.Love this! I've been considering buying an actual vintage Grand Prix (with the fine driver on the back of the file, it won't have the hook, though), really like the tool combo on this
+1 That is a really nice mod Hi

+2

Sent from my iPhone using Tapatalk
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
Those are what Syph007 uses, I think he mentioned his secret in And so it begins.... (My adventures into Alox!). They are not necessarily any easier than pins however, at least not if you're modding for your own use, since it requires drilling out the rather hard tools to make them fit. I believe they are 1/8" instead of the standard 2.2 & 2.5 mm but I'm not certain.
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
Those are what Syph007 uses, I think he mentioned his secret in And so it begins.... (My adventures into Alox!). They are not necessarily any easier than pins however, at least not if you're modding for your own use, since it requires drilling out the rather hard tools to make them fit. I believe they are 1/8" instead of the standard 2.2 & 2.5 mm but I'm not certain.
Oh, drilling out the tools? I don't want to do that ... :o
Thanks for your answer! :) -
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
Those are what Syph007 uses, I think he mentioned his secret in And so it begins.... (My adventures into Alox!). They are not necessarily any easier than pins however, at least not if you're modding for your own use, since it requires drilling out the rather hard tools to make them fit. I believe they are 1/8" instead of the standard 2.2 & 2.5 mm but I'm not certain.
Oh, drilling out the tools? I don't want to do that ... :o
Thanks for your answer! :)If you can source the pinstock or if you are only planning on removing layers the actual work is not that difficult (although it's preferable to work with Cellidor since that hides any imperfections).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login