Show off your Sak mod's!
-
New page banana man dance

-
@timganev said:
The parcel hook is also pry bar/ flat screwdriver /post/1365950
The corkscrew was replaced by awl.
Other tools: scissors, blade and... fork
I do not know if it's feasible.
But there is little to be something to do on the heel of the hook to avoid the right left movement.The mod is nice the fork makes smile
-
Not mine but pretty sweet. I don't think I saw this one over here.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@WWW said:
Not mine but pretty sweet. I don't think I saw this one over here.- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Pretty cool mod on that SAK :o :like: :like:
-
Hello,
wanted to make interchangeable scales from wood for my Executive. A change of the liners was necessary, now they are from thick brass, the scales are screwed on. They are of Red Shisham.


-
@Sunshineinwinter said:
Hello,wanted to make interchangeable scales from wood for my Executive. A change of the liners was necessary, now they are from thick brass, the scales are screwed on. They are of Red Shisham.


Those are awesome looking Sunshine :o

-
-
@hiraethus said:
I recently traded a Grand Prix mod with Gareth but decided I missed it so built another.

Used a file spring that can accept a back tool and fitted the flat driver instead of the chisel. No nail file hook on this one, unfortunately.Love this! I've been considering buying an actual vintage Grand Prix (with the fine driver on the back of the file, it won't have the hook, though), really like the tool combo on this
-
I recently traded a Grand Prix mod with Gareth but decided I missed it so built another.

Used a file spring that can accept a back tool and fitted the flat driver instead of the chisel. No nail file hook on this one, unfortunately.Love this! I've been considering buying an actual vintage Grand Prix (with the fine driver on the back of the file, it won't have the hook, though), really like the tool combo on this
+1 That is a really nice mod Hi

-
I recently traded a Grand Prix mod with Gareth but decided I missed it so built another.

Used a file spring that can accept a back tool and fitted the flat driver instead of the chisel. No nail file hook on this one, unfortunately.Love this! I've been considering buying an actual vintage Grand Prix (with the fine driver on the back of the file, it won't have the hook, though), really like the tool combo on this
+1 That is a really nice mod Hi

+2

Sent from my iPhone using Tapatalk
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
Those are what Syph007 uses, I think he mentioned his secret in And so it begins.... (My adventures into Alox!). They are not necessarily any easier than pins however, at least not if you're modding for your own use, since it requires drilling out the rather hard tools to make them fit. I believe they are 1/8" instead of the standard 2.2 & 2.5 mm but I'm not certain.
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
Those are what Syph007 uses, I think he mentioned his secret in And so it begins.... (My adventures into Alox!). They are not necessarily any easier than pins however, at least not if you're modding for your own use, since it requires drilling out the rather hard tools to make them fit. I believe they are 1/8" instead of the standard 2.2 & 2.5 mm but I'm not certain.
Oh, drilling out the tools? I don't want to do that ... :o
Thanks for your answer! :) -
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
Those are what Syph007 uses, I think he mentioned his secret in And so it begins.... (My adventures into Alox!). They are not necessarily any easier than pins however, at least not if you're modding for your own use, since it requires drilling out the rather hard tools to make them fit. I believe they are 1/8" instead of the standard 2.2 & 2.5 mm but I'm not certain.
Oh, drilling out the tools? I don't want to do that ... :o
Thanks for your answer! :)If you can source the pinstock or if you are only planning on removing layers the actual work is not that difficult (although it's preferable to work with Cellidor since that hides any imperfections).
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
I think T6 torx

Sent from my SM-G920R4 using Tapatalk
-
For some time I wanted a Compact pattern in 84mm.
I started this mod with 84mm Waiter, 91mm scissors with parcel hook (the parcel hook was already modded to pry bar) and aluminum plate from ancient hard drive ;)



-
The hard part is to drill in victorinox steel… I give up the idea to make a new hole in the scissors and just enlarge all holes to 3mm (destroying cobalt drill bit in the process ).
Whit the new scales I assembled back the Water and started the scissors spring mod



-
When I finish to balance the spring tension I will put the permanent bolts (they will be aligned
With the scales) and a cross on the scales :D


-
Nice job, Timganev. That is a novel source of scale/liner material.
-
Awesome mod Timganev...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login