Gerber Episodes.
-
Episode 69 - Gerber Bear Grylls Basic Survival Kit .
Any of the following survival kits from the BG series are fairly nice kits. These are kits I wouldn't mind packing with me.
The BG Basic Survival Kit comes in a very fetching zippered nylon outer casing. The back has the usual air rescue reference information.
Inside, is a water proof clear vinyl enclosure that should ensure all your contents shall remain dry for the most part.
Details
(8 Piece Kit)
Waterproof Bag
Gerber Mini-Paraframe Knife
Emergency Whistle
Fire Starter
Waterproof Matches
Snare Wire
Emergency Cord
Cotton Ball - Fire Tinder
Lightweight, ripstop nylon bag with waterproof zipper
Land to air rescue instructions
Priorities of Survival - Pocket guide contains Bear’s survival essentialsThis is a nice little survival kit that has room for a few small additions to round out the kit to your liking.
-
Episode 70 - Gerber Bear Grylls Ultimate Survival Kit.
This 16 piece kit builds upon the Basic kit, adding quite a lot of capability in a package not much larger than the basic kit.
The Ultimate Kit comes in a black nylon zippered outer enclosure with the standard air & land rescue instructions information panel on the backside.
Inside, is a vinyl clear water proof enclosure much like the Basic kit, only sized accordingly.
Details
(16 Piece Kit)
Gerber Miniature Multi-tool
Needle Nose Pliers
Wire Cutters
Fine Edge Knife
Phillips Screwdriver
Small Flat Driver
Medium Flat Driver
Lanyard Ring
Bottle Opener
Tweezers
Waterproof Bag
Miniature Light
Hand Saw
Signaling Mirror
Survival Blanket
Fire Starter
Waterproof matches
Cotton Ball - Fire Tinder
Snare Wire
Emergency Cord
Waxed Thread
Fishing Kit
Sewing kit
Lanyard Whistle
Lightweight, ripstop nylon bag with waterproof zipper
Land to air rescue instructions
Priorities of Survival - Pocket guide contains Bear’s survival essentialsA view of the survival blanket and emergency cord visible on the backside of the waterproof bag.
And a top view of the contents.
-
Episode 71 - Gerber Bear Grylls Scout Essentials Kit.
Unlike the BG Basic and Ultimate Survival Kits, the BG Scout Essentials Kit comes in a two piece plastic shell that could double as a water container in a pinch.
The backside of the hard plastic case features the usual land and air instructions panel seen on many BG items.
The kit comes apart easily by simply pulling the two halves apart. There is no internal waterproof bag to be found in this kit.
DETAILS:
Overall Size: 4.75" x 3.75" x 1"
Weight: 5.4 oz.Polypropylene case,
First Aid Kit,
Waterproof Matches,
L.E.D. Micro Torch,
Light Compact Scout Knife,
Button Compass,
Priorities of Survival Guide -
-
Episode 73 - Gerber Bear Grylls Canteen.
This canteen and nesting cup was inspired by military gear. The canteen comes with a belt loop sheath that wraps around the canteen via a Velcro strap.
Once removed, you can see the orange nesting cup.
The nesting cup has a pair of rubber covered handles that act as heat insulators to prevent burns. The canteen itself is nicely textured much like the rest of the BG series.
-
-
@Chako said:
Episode 63 - Gerber Bear Grylls Survival Torch.This is a nice little flashlight with a secret.
Yes, that logo found towards the posterior end gave it away didn't it? The secret is a compartment where one would expect to install batteries, instead, it holds a nice little fire starting kit that consist of a small cotton tinder, and a few matches. There is nothing stopping you from removing said fire kit and installing something that would fit the very limited space. So there are some customization options out there for the adventurous.
DETAILS:
Overall Length: 5.98"
Weight: 3.89 oz.
Batteries: AA
Lumens: High: 24
Runtime: High: 20 hrI always have problems with dimensions... The flashlight works with the survival kit in, right? So this is a "double AA" that only takes one AA in the front part.
Could you please post an image with an AA battery next to it for a slightly dimensional challenged Etherealicer :P -
Chako, thank you for the coverage of lots of tools that I am not even slightly tempted to buy ;)
I liked the photos, and enjoyed the sardonic comments even more. Keep up the good work

-
That is exactly right Etherealicer. This is basically a two AA torch with one removed to make a compartment.
gregozedobe...surely you jest! Everyone wants...nay...needs a BG Tinderbox!
-
Once again, thank you so much for taking the time to do these.

-
If nothing else, possibly a good reference thread.

-
Awesome thread and really nice pictures as always!
Now I just want to see you wearing all that gear! The belt stacked with all the sheaths etc. You'd be ready for anything! -
I may have to nix the swimming part.

-
Great review of the many different Gerber multitools.
-
Thanks. Every now and then I try to put something big on the site.
-
The best Collector Mr. Chako Salute

-
Episode 74 - Gerber Suspension NXT.
Hard to believe the last time I added anything was back in 2017. I haven't exactly been collecting multi-tools of late, having my interest go in other directions. With that said, I found two Gerber multi-tools at a local store. First up is the Gerber Suspension NXT. Now the original Suspension was a very popular multi-tool that spawned quite a few similar tools. I am uncertain why Gerber called this one a Suspension NXT as it doesn't resemble the older tool in the least. I must say, the older tool was of a higher build quality compared to this newer tool. I can flex the handles in the close position up and down around the pliers pivot point. The whole tool is full of angular sharp edges. The locking tabs have several issues with them. Not only do they stick out way too much and are pointy as all get out, you can push them from side to side. I noted that in my model, when you did that, it jammed the folding tools somewhat. Not cool, and a sure indicator of poor build quality. The tool does feature a belt clip, however, it digs into your hands when the tool is in the closed position. I am happy to say, the tool tightens up in the open position...but all those sharp edges and wiggle detracts from my opinion of a quality tool. It is not all doom and gloom though..as I do tend to like the fold out tools that come with it. No included sheath however is a major let down for myself. It would be great to have another option other than the included belt clip. Mind you, they did include a lanyard hole but oddly made this out of plastic as opposed to stainless steel.
I don't mind the fold out tools in general. That awl is of a rather interesting design. It is more akin to a very sharp box opener than an awl.
The jaws are spring loaded.
-
Episode 75 - Gerber Truss.
Compared to the Gerber Suspension NXT (I guess they didn't want to spell "NEXT"), the Truss is a much better tool in build quality and design. The Truss does not flex as much as the Suspension NXT in the closed position. Better yet, the Truss is rounded in all the right spots to make it a much more comfortable tool to use. With that said, I am finding these new locking push tabs to be a bit sharp and they stick out way too much. So much so that I find them digging into my palms. Much like the previous tool, you also get a bit of plastic in the shape of a lanyard hole on one handle, and a bit of plastic on the other handle to match. Of course, Gerber saw fit to but the Gerber logo on both pieces. Unfortunately, this tool also suffers from locking tabs that can be moved in and out. I am not a big fan of Gerber's new locking tab design and construction. This was much better on the older tools. At least this tool comes with a sheath that can be worn side style or up/down style.
From what I can see, both the Truss and Suspension NXT feature the same pliers head, including the built in spring. From what I can see, I might consider both tools to be in the same family as there are plenty of similar design cues between them, right down to the tool design.
-
Nice additions to your collection, Chako! And nice write up as well. Thank you dor taking the time.

I liked the Truss more than the NXT also, but was kidded about the choice.

I have not noted the lock issue, but have also not thought of trying to push the locks side-to-side. That is definitely a step down from the older Suspension, which is a tough cookie construction wise. I think a lot of the issues come from the fact Gerber wanted to keep the tools relatively inexpensive. I feel they are still quite good at the price points, seeing as they are competitive with Ganzo at the moment.
The NXT rode in my pocket for a while and performed as advertised. But, that said, I had to return(for an exchange) one of the two I bought, because the pliers had an outstanding amount of slop in them and drastically misaligned handles. The one I recieved was a good example with little handle-wobble and a tight pliers head. It went into the collection of course. The one I have designated as a user is a fair example, but has the wobble you mentioned.
-
I hear you. I am still trying to justify a Gerber Center Drive for my collection. They run around 180 Canadian locally.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
























