Gerber Episodes.
-
Chako, thank you for the coverage of lots of tools that I am not even slightly tempted to buy ;)
I liked the photos, and enjoyed the sardonic comments even more. Keep up the good work

-
That is exactly right Etherealicer. This is basically a two AA torch with one removed to make a compartment.
gregozedobe...surely you jest! Everyone wants...nay...needs a BG Tinderbox!
-
Once again, thank you so much for taking the time to do these.

-
If nothing else, possibly a good reference thread.

-
Awesome thread and really nice pictures as always!
Now I just want to see you wearing all that gear! The belt stacked with all the sheaths etc. You'd be ready for anything! -
I may have to nix the swimming part.

-
Great review of the many different Gerber multitools.
-
Thanks. Every now and then I try to put something big on the site.
-
The best Collector Mr. Chako Salute

-
Episode 74 - Gerber Suspension NXT.
Hard to believe the last time I added anything was back in 2017. I haven't exactly been collecting multi-tools of late, having my interest go in other directions. With that said, I found two Gerber multi-tools at a local store. First up is the Gerber Suspension NXT. Now the original Suspension was a very popular multi-tool that spawned quite a few similar tools. I am uncertain why Gerber called this one a Suspension NXT as it doesn't resemble the older tool in the least. I must say, the older tool was of a higher build quality compared to this newer tool. I can flex the handles in the close position up and down around the pliers pivot point. The whole tool is full of angular sharp edges. The locking tabs have several issues with them. Not only do they stick out way too much and are pointy as all get out, you can push them from side to side. I noted that in my model, when you did that, it jammed the folding tools somewhat. Not cool, and a sure indicator of poor build quality. The tool does feature a belt clip, however, it digs into your hands when the tool is in the closed position. I am happy to say, the tool tightens up in the open position...but all those sharp edges and wiggle detracts from my opinion of a quality tool. It is not all doom and gloom though..as I do tend to like the fold out tools that come with it. No included sheath however is a major let down for myself. It would be great to have another option other than the included belt clip. Mind you, they did include a lanyard hole but oddly made this out of plastic as opposed to stainless steel.
I don't mind the fold out tools in general. That awl is of a rather interesting design. It is more akin to a very sharp box opener than an awl.
The jaws are spring loaded.
-
Episode 75 - Gerber Truss.
Compared to the Gerber Suspension NXT (I guess they didn't want to spell "NEXT"), the Truss is a much better tool in build quality and design. The Truss does not flex as much as the Suspension NXT in the closed position. Better yet, the Truss is rounded in all the right spots to make it a much more comfortable tool to use. With that said, I am finding these new locking push tabs to be a bit sharp and they stick out way too much. So much so that I find them digging into my palms. Much like the previous tool, you also get a bit of plastic in the shape of a lanyard hole on one handle, and a bit of plastic on the other handle to match. Of course, Gerber saw fit to but the Gerber logo on both pieces. Unfortunately, this tool also suffers from locking tabs that can be moved in and out. I am not a big fan of Gerber's new locking tab design and construction. This was much better on the older tools. At least this tool comes with a sheath that can be worn side style or up/down style.
From what I can see, both the Truss and Suspension NXT feature the same pliers head, including the built in spring. From what I can see, I might consider both tools to be in the same family as there are plenty of similar design cues between them, right down to the tool design.
-
Nice additions to your collection, Chako! And nice write up as well. Thank you dor taking the time.

I liked the Truss more than the NXT also, but was kidded about the choice.

I have not noted the lock issue, but have also not thought of trying to push the locks side-to-side. That is definitely a step down from the older Suspension, which is a tough cookie construction wise. I think a lot of the issues come from the fact Gerber wanted to keep the tools relatively inexpensive. I feel they are still quite good at the price points, seeing as they are competitive with Ganzo at the moment.
The NXT rode in my pocket for a while and performed as advertised. But, that said, I had to return(for an exchange) one of the two I bought, because the pliers had an outstanding amount of slop in them and drastically misaligned handles. The one I recieved was a good example with little handle-wobble and a tight pliers head. It went into the collection of course. The one I have designated as a user is a fair example, but has the wobble you mentioned.
-
I hear you. I am still trying to justify a Gerber Center Drive for my collection. They run around 180 Canadian locally.

-
Thanks, Chako. 'Voluminous' work.
-
You are welcome. I guess I should update this thread soon with the Center Drive...as I now have one of those in the collection.
-
Your GERBER collection is so nice Chako , start to like GERGER tools more and more.

-
You are welcome.
-
Chako, thank you very much for all this information. Truly, I am amazed with all the information you've acquired along with all the tools I didn't even know existed either. Years ago, I managed to find a Fiskars branded MP600 and if I remember correctly this was the second multi tool I've ever owned. What is interesting is there is a Gerber bit kit set model number 22-45200 that can be used with the Phillips driver on the MP400, 600, 700 and 800. Gerber still sells this set, albeit the individual I spoke to at Gerber was generous enough just to send the bit adapter as apparently that isn't sold separately.
Here is a link in case anyone interested via Gerber's website. https://www.gerbergear.com/en-us/shop/equipment/accessories/10-piece-tool-kit-mp400-mp600-mp650-mp700-mp800-45200
This is also interesting with the first generation MP400, the blade had a finger slot with a drop point blade, whereas the "modern" day variation has a nail nick instead as well as a sheep foot blade. Very handy multi tool due to it's size, lightweight and one handed operation.
-
So Chako have we added anymore to this collection? There’s a few still left out there now and it’s not in this thread yet
Anyway, I use this thread as a go to for my gerbers. It has also helped ID a few that people were asking about. So get off Facebook and get posting here. (I should take my own advice there) -
Well I didn't mean to post again; meant to modify my post from 2019 as that link no longer works. Also, Gerber more than three years ago Gerber removed all customer service support via telephonically. Only way to reach customer service is via email and bluntly put response times variate immensely.
Sometime in 2022, Gerber released a Center Drive version with a gut hook named Gerber Center Drive Rescue. Below is an archived image as Gerber for whatever reason doesn't keep a list of their products the same way Leatherman wisely does.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




