New SOG (2017) - Initial thoughts
-
@Grant Lamontagne said:
@50ft-trad said:
Grant, I hope you realise that you just made me defend a Leatherman design principle

:D
At least SOG can use standard bits.
:P
Def
.... without peripherals at one end, whereas they can both use standard bits but only with the use of peripheral components at the other end ;)
-
Q4 looks interesting. At one point I did look bit driver mt. But to be honest I have not found usable one. LM bits are good solution if you think about bits in edc (I do not carry all bit options so don't mind even bits are not normal size). This Q4 seems like ok solution. Again bits and tool can be quite large edc. And again like estimated pliers look light duty. Again I prefer fixed flat and philips. Flat I use other then screw tasks as well (prybar etc). But seems this can be smaller then example wave with one slide of bits or spirit plus. So looks fine but depends how handy carry solution is.
So agree that bit driver with one bit is not a great solution. And to carry example 12 bits is same then having extra sak in carry. Again there are quite small ratchet and bit sets you can carry on belt. So LM could do as well Q4 like solution for own bits, example for MT about juice S2 size + room for 5 double bits, that I could edc.
But surely nice try for this area at least.
-
MOre pics and info of the 2017 products are available on SOG website!!!
-
@temo said:
Q4 looks interesting. At one point I did look bit driver mt. But to be honest I have not found usable one. LM bits are good solution if you think about bits in edc (I do not carry all bit options so don't mind even bits are not normal size). This Q4 seems like ok solution. Again bits and tool can be quite large edc. And again like estimated pliers look light duty. Again I prefer fixed flat and philips. Flat I use other then screw tasks as well (prybar etc). But seems this can be smaller then example wave with one slide of bits or spirit plus. So looks fine but depends how handy carry solution is.So agree that bit driver with one bit is not a great solution. And to carry example 12 bits is same then having extra sak in carry. Again there are quite small ratchet and bit sets you can carry on belt. So LM could do as well Q4 like solution for own bits, example for MT about juice S2 size + room for 5 double bits, that I could edc.
But surely nice try for this area at least.
The length of the Q4 is listed as 5.8" (about 147mm) but it's not clear if this is closed, or with/without a driver bit in position. It is possible that this tool might have Juice sized pliers. We can't be certain until somebody buys one and posts size comparison pictures
-
Yes quite long but slim, again bit set brings some size and weight (assume seperate but packs up as pounch was listed). Nice to see more later :)
-
@rdub934 said:
MOre pics and info of the 2017 products are available on SOG website!!!
Additional observations:
I do like the way that the back end of the plier head on the PA and PG "fills" the gaps on the gear teeth, minimising the "gears of madness" effect on earlier tools. I'm not quite sure why they have made them hollow though

The pocket clip on the PA is on the correct end for sure, but seems that the tool will be riding quite high in the pocket. Obviously we don't know how big the hands are of whoever is holding the tool, but it does seen a decent "urban pocket tool" size. In order words, not too large for general off work carry
-
-
Thankfully, I was wrong about the Q2 handles.....

-
Despite the battering I gave the PowerGrab earlier, I do need to pour a little more praise on it for the size efficiency of the knife blades.
On the PowerLock, the implements (including knife blades) all appear rather diminutive in comparison with the size of the overall tool. This is because they all carry the same size tools as found on the PPP. The PowerGrab to it's credit, carries knife blades relative to the size of the tool

This is a very significant improvement over the older models, and also means there is a goodly amount of blade which is not impeded by the thumb stud on deep cutting chores.
On this pic, you can also see the plier casting behind the gearing, as eluded to earlier, minimising any discomfort in hand from the gear teeth. There is certainly SOME thought that has gone into these new format tools, but I still think putting the serrated blade and scissors on the "wrong" arms, and the inclusion of old style bit driver stump to be very sloppy and poorly considered.
-
There does seem to be a fair amount of variation in the location and width of the backlock notches across the range of implements. This may affect rigidity of lock up.

Attaching pics is such a PITA on a phone

Also notice the long backsprings (no "rocker" locks) and the quirky release thingummy jobbies.....


I'm not quite sure what to make of those to be honest.....
-
Despite looking a bit on the small side, the. Phillis does look a lot better formed on the PowerAccess than was represented on the pics from last year's Powerplay. This suggests that they are making some inroads toward quality improvement.
The fact that the locking system on this tool is so different to the PowerGrab, suggests to me that they are experimenting, and not entirely convinced about which designs to run with (get both out on the market, and see which holds up better - least returns). The locking systems on the PowerPlay, Batons, and Sync all seem different again. There's no unified approach being used on any of the locking systems of the newer tools

-
Question for the Powerplay and Reactor owners....
I've heard about the bits slipping in the plier head system if there isn't a sustained force keeping the handles closed. Does this mean that you can use this to your advantage like a ratcheting system so you don't have to actually spin the tool?
I hope that makes sense....
-
What interest me are those Kiku folders. VG-10 steel may indicate Seki-made :ahhh
-
@50ft-trad said:
Question for the Powerplay and Reactor owners....I've heard about the bits slipping in the plier head system if there isn't a sustained force keeping the handles closed. Does this mean that you can use this to your advantage like a ratcheting system so you don't have to actually spin the tool?
I hope that makes sense....
I have heard that ratcheting like that would work.
I have used PowerPlay enough to say that the force you have to use isnt tremendous, its ok. I havent used Reactors driver, I think the whole tool would explode if I tried. -
True winner for me looks like it'll be the Poweracces. Not innovative, but come on:
only 1 oz. more than PPP, and you gain
Pocket clip (had to mod my PPP to get that)
Locking tools
Precision screwdriver (I like that one for the glasses and electronics) and maybe a decent Phillips (depends on if they change design, which seems to be the case)add to that the C.Leverage and weight and you've got a true champ among similar tools in the market. Just wanna know the price :ahhh
-
@ThePeacent said:
True winner for me looks like it'll be the Poweracces. Not innovative, but come on:only 1 oz. more than PPP, and you gain
Pocket clip (had to mod my PPP to get that)
Locking tools
Precision screwdriver (I like that one for the glasses and electronics) and maybe a decent Phillips (depends on if they change design, which seems to be the case)add to that the C.Leverage and weight and you've got a true champ among similar tools in the market. Just wanna know the price :ahhh
List price of $67, so will be available for less than that at retailers in the US, (and double that for us in Europe :P).
When you consider they have listed the small Sync and the Q2 Baton at the same price, that makes the PA look like a real bargain.
-
@50ft-trad said:
Question for the Powerplay and Reactor owners....
I've heard about the bits slipping in the plier head system if there isn't a sustained force keeping the handles closed. Does this mean that you can use this to your advantage like a ratcheting system so you don't have to actually spin the tool?
I hope that makes sense....
I have heard that ratcheting like that would work.
I have used PowerPlay enough to say that the force you have to use isnt tremendous, its ok. I havent used Reactors driver, I think the whole tool would explode if I tried.

-
This picture is quite useful IMO.

You get a better look at the locking mechanism (which looks to be a Leatherman style rocker lock, but with the "spring" stamped out of the sides, rather than the back like on the Rebar). The Pocket clip is a bit wide, but was mounted on the correct side like 50ft said. You can also clearly see that when closed the pliers "butt" acts similarly to the PowerLock's gear covers. This is a pretty great idea, I think.
Also, a closer look at the protractor, which is actually pretty nifty. You can also see that SOG chose to fill in the "holes" that the magnets go into in the Reactor and PowerPlay's bit drivers

The more i look at this tool, the more convinced I am that this could be a real winner for SOG, especially since Leatherman doesn't really have an answer to it.
-
@50ft-trad said:
And, why the smurf are the locks on the blade and scissors which shouldn't be subject to axial loads, and the drivers which WILL be subject to axial loads are the lock releases.I think we may be misinterpreting what "lock release" means. I think the Sync locks are a lot like the original SuperTool's, everything can lock. SOG marking the drivers as lock releases simply mean they are the "safe" option to pull out when another tool is open.
Of course, that means you have to pull out the scissors when one of the drivers is deployed, but thats besides the point. Maybe SOG should have marked the "sharp" implements instead.
-
I am loving the PowerAccess. I agree that it will be a winner for them (and anyone who purchases). It is a PPP with outside access tools and a pocket clip. The pliers head even looks the same, with addition of the center-axis driver/gear cover section. Win!
The PowerGrab looks a lot like the PowerLock, too, the plier head looks the same besides the new center axis driver section that also functions as gear covers. So I am thinking this will be a win, as well.
I guess this situates the PowerPlay in the category previously held by the original PowerPlier (albeit with locks). I dunno, its almost in no man's land now between these two newer offerings.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

