SAK combo dilema
-
@ToolJoe said:
Hercules are pretty solid. It has a locking blade tho..Of course you could just rip the red scales off and put some dual density scales on there. It would look cooler and you'd lose the lock!
The problem with the Hercules is (as I have discovered) it's just stupidly big. Not really made for schlepping around.
I solved my own Phillips dilemma by giving in to the fact that a real screwdriver is always going to be better than a SAK one. Backside or front, SAK Phillipses often can't do the job for a variety of reasons. Just ignore them and things become a lot less complicated, SAK wise...
-
Why Vic if you really need pliers?
Get eveything else, but use separate pliers of your choosing. -
A Ranger (or Master Craftsman) will give you the wood saw and metal file in a thin 5 layer package.
For the Pliers and Phillips consider the following possibilities:
Pliers - A Leatherman P4 ( or PS4 or Style PS) on keyring .
Phillips - A Leatherman Crater TX 33 - has an inline Phillips in addition to the one handed opening blade.
I sometimes carry that clipped to my right pants pocket, and a SAK dangling from a cord into my left pocket.
-
The Crater with bits is a good option, BUT the OP is in England, I believe he is restricted from having a locking blade.
That is a bummer and I do not understand the restriction as I have read about several attacks with knifes, that are fixed, most often kitchen knifes, larger than any pocket folder.
-
I would go with the CT41 and just carry it until you get used to the size. I did this with the SwissChamp and carried one for years.

-
@LoopCutter said:
The Crater with bits is a good option, BUT the OP is in England, I believe he is restricted from having a locking blade.I understand, sorry for not noting that.
How about substituting a Spartan Lite or CT 29 or Explorer in place of the Crater ?
Scientists ,Yeomans and Passengers are harder to find and more costly. -
@50ft-trad said:
There comes a point when carrying two separate tools is better than one cumbersome one. Personally I like to keep pliers and Phillips duty for the pliers tool rather than a SAK. An IDL T5 or T7 (or similar) might be a game changer for you. In a larger format, a knifeless plier modification might be an option too. The blade is easily removed from a Gerber Octane, and leaves a very slim profile on a deep carry pocket clip.Sticking strictly with SAKs, you have essentially described a CT41 without scissors - which won't alter thickness much, and would need to be a modification as it's not a standard model.
Seriously, check out the T5 and T7, and maybe even some of the Swiss+tech offerings too
That's a possibility. I do have a set of Screwpop pliers but I was trying to minimise the number of separate widgets I carry around.
-
Thanks for the input, there's certainly plenty of options there.
In an ideal world I'd probably just go with a Leatherman or Swisstool type MT but unfortunately the best plier tools all have locking blades, even the new "bladeless" Rebar risks running foul of UK knife laws because it still has a locking saw blade and reamer. The best UK legal plier tool I've found (for my purposes at least) is probably the Leatherman Squirt although it's petite to say the least it has proven itself. As I said above, I'm trying to minimise the number of widgets I carry (if I ever get asked to turn out my pockets it could be embarrassing) and it's not so much the overall weight that's the issue but the handiness of the tool itself - I don't mind two smaller SAKs over one big one but I'd rather minimise duplication. I've been looking for the perfect multitool for years and concluded that it doesn't exist and there will always have to be some compromise along the way. Maybe the CT41 isn't so bad :) -
@classicrock said:
I do love the Deluxe Tinker model. 4 layers and has a pliers. But as you said about the limitation of the backside phillips driver, I feel the same about it.Then I found one SAK named Yeoman Mechanic. But it was hard to find. So I made a custom one, with a little help of my friend.
So it's still a 4 layers SAK, has a pliers and of course inline phillips driver. Well if you want to built a custom one, just add a wood saw.That is rather nice but as you say, hard to find. The Master Craftsman is another one I'd like to get my hands on :(
-
@twiliter said:
I would go with the CT41 and just carry it until you get used to the size. I did this with the SwissChamp and carried one for years.
I've pretty much reached that conclusion, I used to carry my CT39 regularly - what's one or two more layers?
Next step is maybe try my own mod but not I'll have to start collecting distressed second handers first. I haven't got the nerve to break up one of mine. -
I do love the Deluxe Tinker model. 4 layers and has a pliers. But as you said about the limitation of the backside phillips driver, I feel the same about it.
Then I found one SAK named Yeoman Mechanic. But it was hard to find. So I made a custom one, with a little help of my friend.
So it's still a 4 layers SAK, has a pliers and of course inline phillips driver. Well if you want to built a custom one, just add a wood saw.That is rather nice but as you say, hard to find. The Master Craftsman is another one I'd like to get my hands on :(
You can buy the Master Craftsman new from Amazon Japan still (with the nice Space Shuttle inlay). I did this a few weeks before Xmas and it arrived at my door in the UK 4 days later. It's 5 layers, but all quite thin ones, so it's not that thick. Every layer has a back tool, which is nice too.

-
@Nick762 said:
Thanks for the input, there's certainly plenty of options there.
In an ideal world I'd probably just go with a Leatherman or Swisstool type MT but unfortunately the best plier tools all have locking blades, even the new "bladeless" Rebar risks running foul of UK knife laws because it still has a locking saw blade and reamer. The best UK legal plier tool I've found (for my purposes at least) is probably the Leatherman Squirt although it's petite to say the least it has proven itself. As I said above, I'm trying to minimise the number of widgets I carry (if I ever get asked to turn out my pockets it could be embarrassing) and it's not so much the overall weight that's the issue but the handiness of the tool itself - I don't mind two smaller SAKs over one big one but I'd rather minimise duplication. I've been looking for the perfect multitool for years and concluded that it doesn't exist and there will always have to be some compromise along the way. Maybe the CT41 isn't so bad :)But I did find somewhere selling NOS Leatherman Knifeless Fuses - I bought one myself last year, but they had more - this has no knife, saw or awl, so UK-friendly but does have scissors, metal file, can/bottle opener and Phillips and flat drivers, all of which lock. If interested PM me and I'll send you a link to the shop
-
@eddie1115 said:
In practice, though, I usually pair a plier-based MT with a SAK to achieve what you're talking about. Ranger plus LM Skeletool could work, or Explorer paired with any file- and saw-equipped MT (Wave, Rebar, Spirit).This.
I also realised that even though I wanted the saw/file/pliers/3d Philips, I rarely need them on person. So I like to carry my favourite 3 layer sak on person (Pioneer X handles most Philips screws just fine), and leave a Rebar in my work/EDC bag that's usually in the vicinity.
-
Been carrying my CT41 for a while and it's been surprisingly handy as I did have misgivings about its size. I had another look at my Handyman which is a little more compact, the only problem being the lack of a Phillips.
Here's one possible solution 😀
-
Before I was finished reading the original post, I was already thinking Victorinox Spirit X. Working around legal restrictions that prevent carrying multi-tools with locking blades does put a crimp in the better options. Although particularly fond of my Spirit X and LM Charge TTI & AL, I find myself spending more time with one of my LM Juice multi-tools (none of which have locking blades). I always have a Vic Explorer in my pocket and have swapped out a Vic Compact with a LM Juice S2 for the other pocket. The pliers are far superior to the Vic fold-out (Tinker Deluxe, Mechanic, Swiss Champ, etc) and it has a set of drivers (using the optional extender, it can use standard 1/4" bits).
Since one of your requirements was a saw, you can opt for the LM Juice CS4 and it would only add an extra ounce. Want the saw, a serrated blade & a file? The LM Juice Pro (retired) and the Juice XE6 add a little more weight to the CS4 but pack more functions. These tools are small, dense and will weigh more that their small size would suggest but the return is a very useful pliers/wire cutters/needle nose.
Another option would be to go with a Cybertool 29, reducing SAK layers to 3 then and use something like a LM Squirt PS4 for scissors and pliers (I would still look at a Juice S2 or C2 for pliers & drivers...the S2 has scissors).
Good luck!
-
Had occasion to walk up Tottenham Court Road (for non U.K. readers this is a street in London famed for its cut price electronics shops although they are getting a bit thin on the ground these days due I guess to more internet shopping), happened to glance in the window of a photographic shop and saw this, a Handyman with a Phillips aka the much missed Craftsman! I suspect my enthusiasm may have counted against getting a discount for "old model" but I didn't want to lose this one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login