The Dremel (or clone ) Owners Club
-
As soon as I read "you can get them online" my brain screamed expensive. Although they could be an interesting gift for our sponsors as well
What, the wood or plastic? Yeah the wood ones are like $12-20 US but the plastic ones are like $1-8 depending where you order from.
JRThanks. Still, We'd need about 250 of 'em, with the exchange rate... perhaps better to spend that cash on a few education seminars for new volunteers
-
My rotary tools have been basically been getting used for around the house jobs. I did pick up one of the Milescraft right angle attachments at Menards along with a 4pk of the RotoZip 1'8" shank multi purpose cutting bits (exact same ones as the Dremel multi purpose cutting bits, and I do mean exact same ones as both Dremel and RotoZip are owned by Bosch tools) which are cheaper to get then the individual Dremel Multi Purpose bits (about $3.50 for one vs. about $7.50 for 4). Whats Nice about the Right angle Attachment it came with 2 collet nuts with the square hole, one fits the Dremel 3000 the other fits my Harbor Freight Rotary Tools (the nut is designed to act ans a collet hold the squared end of the flex shafts and the right angle attachment without use of a collet). I will try to get pics but not at home at the moment and wont be home till late tonight.
-
@eldorf.dragonsbane said:
My rotary tools have been basically been getting used for around the house jobs. I did pick up one of the Milescraft right angle attachments at Menards along with a 4pk of the RotoZip 1'8" shank multi purpose cutting bits (exact same ones as the Dremel multi purpose cutting bits, and I do mean exact same ones as both Dremel and RotoZip are owned by Bosch tools) which are cheaper to get then the individual Dremel Multi Purpose bits (about $3.50 for one vs. about $7.50 for 4). Whats Nice about the Right angle Attachment it came with 2 collet nuts with the square hole, one fits the Dremel 3000 the other fits my Harbor Freight Rotary Tools (the nut is designed to act ans a collet hold the squared end of the flex shafts and the right angle attachment without use of a collet). I will try to get pics but not at home at the moment and wont be home till late tonight.Cool, I'll be waiting for a pic..
JR -
anyone know what these blue/turquoise things do?
its called 'Bench Clamp for Rotary Tool' i thought it was a kinda lathe adaptor or something.
-
Just attaching a drill to a bench, so you can use it sturdy like a third hand. Like if you needed a bench grinder or wire wheel and had the attachment for a drill, just put it in the drill and attach it to the bench? That’s the only thing I see..
JR -
wishing I had a workshop...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Very cool,
JR -
I've had this Craftsman for over 20 years. Pretty sure that it was made by Dremel.
Single speed, 30,000 rpm, great for using with cut off wheels, but too fast for buffing or wire brushes..jpg)

-
Got a Dremel for Christmas, handy tool for all sorts.

-
Its a great tool. As I'm sure you already know, please use the proper safety gear when operating. I recently had a sanding drum burst and slap my hand. Thankfully I was wearing gloves but I shudder to think if I wasn't. Eye protection is a must no matter how small the job you are working on.
-
And watch out for those unreinforced cut off disks, they can fly apart pretty easily. -
Nice

JR -
@Aloha007 said:
Its a great tool. As I'm sure you already know, please use the proper safety gear when operating. I recently had a sanding drum burst and slap my hand. Thankfully I was wearing gloves but I shudder to think if I wasn't. Eye protection is a must no matter how small the job you are working on.I've had cutting disks break and have close calls. My rules with them are: A: always wear eye and face protection; B: only use reinforced disks. Also, wear a face mask or bandanna for dust protection. I really need to get myself a face shield for cutting and grinding.
-
They really need to come out with something like this..
JR
-
I actually think that's something you could probably just do with it's own motor... that would only burn out the dremel fast.
-
Here’s something I got during a tag sale for I think $3, tag says 4, but that’s got a little more umph then a dremel, all I want is something big enough to turn pens, but everything is so expensive, I saw this too,
JR

-
Anyone have the metal pin that secures the shaft so you can open/tighten the Chuck, break?
I was given an old Dremel that had been neglected in shed for a long time.
Motor didn't work and I could not loosen the Chuck.
Upon disassembly I found the " locking" pin broken and hole it used to go into distorted.
Suspect the rust from neglect the primary reason.
New parts for this older model was just not worth it.I got the motor to run finally, and was able get the Chuck open ( there was a rusted bit in it too)
Unless I wanted a dermel with only one tool in it, the free dremel was a bust.I have read reviews that reference this Chuck locking pin issue on Dremels ,and to be fair, lesser expensive rotary tools.
-
We had one of these pins break on a dremel at work. I suspect the lab tech of trying to run it with the pin depressed, but cannot prove it.
On an earlier post, I was stationed in Italy in 1991, and one of the other guys was polishing with a wire wheel and using the 'squint' method of eye protection. Needless to say, one of the little metal wires flew into his eye. He went to sickbay, and they bandaged it up for the weekend. When he went to Naples on Monday (the nearest Navy hospital) they examined it and said the steel had rusted away, and there was nothing to remove! Please wear eye protection.
dc
-
@BlueDot said:
We had one of these pins break on a dremel at work. I suspect the lab tech of trying to run it with the pin depressed, but cannot prove it.On an earlier post, I was stationed in Italy in 1991, and one of the other guys was polishing with a wire wheel and using the 'squint' method of eye protection. Needless to say, one of the little metal wires flew into his eye. He went to sickbay, and they bandaged it up for the weekend. When he went to Naples on Monday (the nearest Navy hospital) they examined it and said the steel had rusted away, and there was nothing to remove! Please wear eye protection.
dc
That is really scary story.Yes please please be careful when using these tools.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login