The Dremel (or clone ) Owners Club
-
Come on guys, it's been since October since anyone posted on here, you can't tell me no ones used theirs since then? So here I'll start it off,,
My first project of the new year, what is it you ask? I had no clue these things even existed until I even saw one on amazon, even after seeing it I had to do research. But I liked it and kinda needed one so I set sail to the hobby desk to fig it out,
Now, if I had a little workshop with a coping saw and a barrel sander or belt sander I would have had this thing done in 5min, but I don't so I ended up using a Dremel for everything except the fine sanding and rubbing leather on the edges. Besides that all it is, is a small piece of plywood I pulled out of the basement by cutting with the sak farmer saw!
So here it is, a thumb book page holder, hey it works, I'm down with it, I'll have to try it out tonight!
JR -
That looks handy. I think a lot of my volunteers (me included) would love that
-
@styx said:
That looks handy. I think a lot of my volunteers (me included) would love thatI was going to use it last night but I dozed off, you can get them online, at least their real wood and not plywood, they also have them in very cheap thin plastic, I wouldn't mind one of those just like I made just as thick in like a funky neon green plastic! That would be cool, or layered black green or black red!
JR -
As soon as I read "you can get them online" my brain screamed expensive. Although they could be an interesting gift for our sponsors as well
-
I got a nice haul of bits for mine at xmas, I haven't used any yet as I got most of them last Saturday when my sister finally made it here for a belated xmas, I'll take a pic tonight to share.
-
As soon as I read "you can get them online" my brain screamed expensive. Although they could be an interesting gift for our sponsors as well
What, the wood or plastic? Yeah the wood ones are like $12-20 US but the plastic ones are like $1-8 depending where you order from.
JRThanks. Still, We'd need about 250 of 'em, with the exchange rate... perhaps better to spend that cash on a few education seminars for new volunteers
-
My rotary tools have been basically been getting used for around the house jobs. I did pick up one of the Milescraft right angle attachments at Menards along with a 4pk of the RotoZip 1'8" shank multi purpose cutting bits (exact same ones as the Dremel multi purpose cutting bits, and I do mean exact same ones as both Dremel and RotoZip are owned by Bosch tools) which are cheaper to get then the individual Dremel Multi Purpose bits (about $3.50 for one vs. about $7.50 for 4). Whats Nice about the Right angle Attachment it came with 2 collet nuts with the square hole, one fits the Dremel 3000 the other fits my Harbor Freight Rotary Tools (the nut is designed to act ans a collet hold the squared end of the flex shafts and the right angle attachment without use of a collet). I will try to get pics but not at home at the moment and wont be home till late tonight.
-
@eldorf.dragonsbane said:
My rotary tools have been basically been getting used for around the house jobs. I did pick up one of the Milescraft right angle attachments at Menards along with a 4pk of the RotoZip 1'8" shank multi purpose cutting bits (exact same ones as the Dremel multi purpose cutting bits, and I do mean exact same ones as both Dremel and RotoZip are owned by Bosch tools) which are cheaper to get then the individual Dremel Multi Purpose bits (about $3.50 for one vs. about $7.50 for 4). Whats Nice about the Right angle Attachment it came with 2 collet nuts with the square hole, one fits the Dremel 3000 the other fits my Harbor Freight Rotary Tools (the nut is designed to act ans a collet hold the squared end of the flex shafts and the right angle attachment without use of a collet). I will try to get pics but not at home at the moment and wont be home till late tonight.Cool, I'll be waiting for a pic..
JR -
anyone know what these blue/turquoise things do?
its called 'Bench Clamp for Rotary Tool' i thought it was a kinda lathe adaptor or something.
-
Just attaching a drill to a bench, so you can use it sturdy like a third hand. Like if you needed a bench grinder or wire wheel and had the attachment for a drill, just put it in the drill and attach it to the bench? That’s the only thing I see..
JR -
wishing I had a workshop...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Very cool,
JR -
I've had this Craftsman for over 20 years. Pretty sure that it was made by Dremel.
Single speed, 30,000 rpm, great for using with cut off wheels, but too fast for buffing or wire brushes..jpg)

-
Got a Dremel for Christmas, handy tool for all sorts.

-
Its a great tool. As I'm sure you already know, please use the proper safety gear when operating. I recently had a sanding drum burst and slap my hand. Thankfully I was wearing gloves but I shudder to think if I wasn't. Eye protection is a must no matter how small the job you are working on.
-
And watch out for those unreinforced cut off disks, they can fly apart pretty easily. -
Nice

JR -
@Aloha007 said:
Its a great tool. As I'm sure you already know, please use the proper safety gear when operating. I recently had a sanding drum burst and slap my hand. Thankfully I was wearing gloves but I shudder to think if I wasn't. Eye protection is a must no matter how small the job you are working on.I've had cutting disks break and have close calls. My rules with them are: A: always wear eye and face protection; B: only use reinforced disks. Also, wear a face mask or bandanna for dust protection. I really need to get myself a face shield for cutting and grinding.
-
They really need to come out with something like this..
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login