What's your latest SAK?
-
@cali-SAK-attack said:
I was allowed to open my B-Day gifts a lil bit ago...... snapped a few pics of " THE GOODS". :D 8)Gardener
TimeKeeper Alarm
Vintage square Philips , Super Tinker - opened this one the other day, couldn't wait
Classic SD - StayGlow
Classic SD - Tye Dyed
Nice snags!

Nice!
-
Thanks, Its soaking in some hot soapy water.
-
Bought my wife this "used, new condition" Vic Compact off the big auction site. It looks mint. Not a mark on the tools or scales. She rarely has pockets, but I figured the variety of tools in a narrow package would be very useful to her in her purse.
I see it has the crossbow stamp on the main blade tang, no nail file on the back of the hook. Scissor is rivot, not screw.
Comparing the thickness of the main blade to my brand new Tinker, the Compact blade is thicker at the tang. Stronger.
Did Victorinox lessen the strength of the blades and parts while doing away with the crossbow??? Just curious.

-
Just won this Hoffritz Super Tink. Has a bent tip on the main blade. I'll figure that out when it gets here.
-
@WolfyW said:
Bought my wife this "used, new condition" Vic Compact off the big auction site. It looks mint. Not a mark on the tools or scales. She rarely has pockets, but I figured the variety of tools in a narrow package would be very useful to her in her purse.I see it has the crossbow stamp on the main blade tang, no nail file on the back of the hook. Scissor is rivot, not screw.
Comparing the thickness of the main blade to my brand new Tinker, the Compact blade is thicker at the tang. Stronger.
Did Victorinox lessen the strength of the blades and parts while doing away with the crossbow??? Just curious.

Wonderful! Another SAK couple! Shortly after Christmas, my wife needed to read some tiny print and I handed her an Explorer and showed her the magnifier. My darling has taken to the Explorer like a duck to water. I put a Compact in her Christmas stocking in the hope that she would enjoy having a full-size SAK after having a Classic on her keychain for decades. The Compact is still in its box but she uses the Explorer regularly.
-
@WolfyW said:
Bought my wife this "used, new condition" Vic Compact off the big auction site. It looks mint. Not a mark on the tools or scales. She rarely has pockets, but I figured the variety of tools in a narrow package would be very useful to her in her purse.I see it has the crossbow stamp on the main blade tang, no nail file on the back of the hook. Scissor is rivot, not screw.
Comparing the thickness of the main blade to my brand new Tinker, the Compact blade is thicker at the tang. Stronger.
Did Victorinox lessen the strength of the blades and parts while doing away with the crossbow??? Just curious.
@Roc said:
Just won this Hoffritz Super Tink. Has a bent tip on the main blade. I'll figure that out when it gets here.AWESOME SNAGS GUYS!! 8) 8) 8)


-
I was allowed to open my B-Day gifts a lil bit ago...... snapped a few pics of " THE GOODS". :D 8)
Gardener
TimeKeeper Alarm
Vintage square Philips , Super Tinker - opened this one the other day, couldn't wait
Classic SD - StayGlow
Classic SD - Tye Dyed
Nice snags!

Nice!
Thanks , G-Unit!
8) -
@WolfyW said:
Bought my wife this "used, new condition" Vic Compact off the big auction site. It looks mint. Not a mark on the tools or scales. She rarely has pockets, but I figured the variety of tools in a narrow package would be very useful to her in her purse.I see it has the crossbow stamp on the main blade tang, no nail file on the back of the hook. Scissor is rivot, not screw.
Comparing the thickness of the main blade to my brand new Tinker, the Compact blade is thicker at the tang. Stronger.
Did Victorinox lessen the strength of the blades and parts while doing away with the crossbow??? Just curious.
Nice knife.
If you're interested its one of the Taiwan series, Sun Moon Lake.
-
Bought my wife this "used, new condition" Vic Compact off the big auction site. It looks mint. Not a mark on the tools or scales. She rarely has pockets, but I figured the variety of tools in a narrow package would be very useful to her in her purse.
I see it has the crossbow stamp on the main blade tang, no nail file on the back of the hook. Scissor is rivot, not screw.
Comparing the thickness of the main blade to my brand new Tinker, the Compact blade is thicker at the tang. Stronger.
Did Victorinox lessen the strength of the blades and parts while doing away with the crossbow??? Just curious.
Nice knife.
If you're interested its one of the Taiwan series, Sun Moon Lake.Thanks for that information! Very interested in knowing that and anything else. And nice collection you have there

-
@WolfyW said:
Bought my wife this "used, new condition" Vic Compact off the big auction site. It looks mint. Not a mark on the tools or scales. She rarely has pockets, but I figured the variety of tools in a narrow package would be very useful to her in her purse.I see it has the crossbow stamp on the main blade tang, no nail file on the back of the hook. Scissor is rivot, not screw.
Comparing the thickness of the main blade to my brand new Tinker, the Compact blade is thicker at the tang. Stronger.
Did Victorinox lessen the strength of the blades and parts while doing away with the crossbow??? Just curious.
I can't speak to the science but it is evident that the base of the tang on the crossbow (Rostfrei) stamp is slightly thicker than the current blade.
Here's one of my older Climbers vs New Compact


-
There is no difference in thickness between the old vs new main blades. The only thing slightly thinner now is the tang. It makes no difference to the overall strength of the blade. If you look carefully at both you'll see that on the old one the tang was thicker than the start of the blade on one side, this means that when produced the blade blank was thicker than the current one, that means more metal was removed ( wasted) when grinding the blade to it's final thickness, multiply that by some millions and you'll get the point. This way there is less material going to waste.
-
@MacGyver said:
There is no difference in thickness between the old vs new main blades. The only thing slightly thinner now is the tang. It makes no difference to the overall strength of the blade. If you look carefully at both you'll see that on the old one the tang was thicker than the start of the blade on one side, this means that when produced the blade blank was thicker than the current one, that means more metal was removed ( wasted) when grinding the blade to it's final thickness, multiply that by some millions and you'll get the point. This way there is less material going to waste.I'll add that I have one SAK which has the crossbow tang stamp but it's thinner and has the spacer on the outer liner. It's an oddball. I prefer the snap feel and perceived sturdiness of the thicker tang personally, though I realize it isnt actually stronger.

-
My latest SAK is this mod, which is described in detail here:
/topic/70512
-
8) -
@MacGyver said:
There is no difference in thickness between the old vs new main blades. The only thing slightly thinner now is the tang. It makes no difference to the overall strength of the blade. If you look carefully at both you'll see that on the old one the tang was thicker than the start of the blade on one side, this means that when produced the blade blank was thicker than the current one, that means more metal was removed ( wasted) when grinding the blade to it's final thickness, multiply that by some millions and you'll get the point. This way there is less material going to waste.Makes sense.
-
@MacGyver said:
There is no difference in thickness between the old vs new main blades. The only thing slightly thinner now is the tang. It makes no difference to the overall strength of the blade. If you look carefully at both you'll see that on the old one the tang was thicker than the start of the blade on one side, this means that when produced the blade blank was thicker than the current one, that means more metal was removed ( wasted) when grinding the blade to it's final thickness, multiply that by some millions and you'll get the point. This way there is less material going to waste.Thanks for the info!

-
Technician (one of two I bought recently, this one will be a user, but I want to get Victorinox to replace the main blade, the tools are fine, though, the other one is still on it's way to me from the US and is NIB, for the collection):

-
@Oxford_Guy said:
Technician (one of two I bought recently, this one will be a user, but I want to get Victorinox to replace the main blade, the tools are fine, though, the other one is still on it's way to me from the US and is NIB, for the collection):

-
@Oxford_Guy said:
Technician (one of two I bought recently, this one will be a user, but I want to get Victorinox to replace the main blade, the tools are fine, though, the other one is still on it's way to me from the US and is NIB, for the collection):
+1

-
Sweet score OG... If it's going to be a user, I'd say just polish the blades and re-sharpen them...

This was my first attempt at polishing/removing scratches... The pic doesn't show it well, but the blade had heavy scratches around the blade tip area...
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login