And so it begins.... (My adventures into Alox!)
-
Maybe you have already answered this but how do you get around the problem with the liner "indent" as mentioned in this topic by Gareth?. Even if the real problem (overlapping tools) is only applicable when mixing new and old parts the spring is still thicker than the blade without the indent. Doesn't this result in a wiggly blade?
-
@Fortytwo said:
Maybe you have already answered this but how do you get around the problem with the liner "indent" as mentioned in this topic by Gareth?. Even if the real problem (overlapping tools) is only applicable when mixing new and old parts the spring is still thicker than the blade without the indent. Doesn't this result in a wiggly blade?I make 0.015" phosphor bronze washers to fill out the gap.
-
More beautiful work Syph

-
Maybe you have already answered this but how do you get around the problem with the liner "indent" as mentioned in this topic by Gareth?. Even if the real problem (overlapping tools) is only applicable when mixing new and old parts the spring is still thicker than the blade without the indent. Doesn't this result in a wiggly blade?
I make 0.015" phosphor bronze washers to fill out the gap.
Thank you, you are always very helpful!
-
Another beauty!

JR -
Scale tools in metal scales... interesting, very interesting indeed.

I am not sure that I ever noticed that in your work before now. But I see it is not a new feature. I suppose that there must be a liner beneath the scale to provide a covering for the slot of the tool? And most importantly, can you make a 93mm model with that feature?

-
@lister said:
Scale tools in metal scales... interesting, very interesting indeed.
I am not sure that I ever noticed that in your work before now. But I see it is not a new feature.** I suppose that there must be a liner beneath the scale to provide a covering for the slot of the tool? **And most importantly, can you make a 93mm model with that feature?

I seem to remember Syph saying that no, he doesn't use a liner. Instead he makes use of the spring to hold the tool in place, quite ingenious.
-
@lister said:
Scale tools in metal scales... interesting, very interesting indeed.
I am not sure that I ever noticed that in your work before now. But I see it is not a new feature. I suppose that there must be a liner beneath the scale to provide a covering for the slot of the tool? And most importantly, can you make a 93mm model with that feature?

No liner, since the backspring is bent to accomodate the backtool on the blade layer, I make use of its position to retain the tweezers. When I convert a SAK to the Ti scales, less liners, its saves about the same thickness as a pliers layer in total thickness and is quite significant.
That same trick cant work on a 93mm since the springs are flush to the bottom of the sak.
Here's a pic of the inside of the backscale.

-
Ive been working quite alot lately trying to get some orders finished up. I got these 2 done last night.
The 2 layer with pliers and nail file Im sure is a first for me.





-
Good stuff

Sent from my SM-G920R4 using Tapatalk
-
I've been trying to read thru this thread, but it is sooooo long! Good reading but alot of posts! So if this has been covered, my apologies...
Can you do a bail on the end of one of your creations?
Awesome work, by the way!
Sent from my Nexus 6 using Tapatalk
-
@Syph007 said:
Remember those 154cm blades I had made a looong time ago.. well I finally got one in a knife.I make the thick spacer out of Titanium, and yes this has a bail with tapered tips to fit in torx T9 screws. :D







Never mind my previous post, found the answer!
Sent from my Nexus 6 using Tapatalk
-
@zrxoa1 said:
I've been trying to read thru this thread, but it is sooooo long! Good reading but alot of posts! So if this has been covered, my apologies...Can you do a bail on the end of one of your creations?
Awesome work, by the way!
Sent from my Nexus 6 using Tapatalk
I havent made a bail yet, but Im sure there is a way. I think machining one from flat Ti stock probably makes the most sense to try.
-
Finally found a guy named Steve to buy this SAK!

No corkscrew/phillips cutout on this one.





-
I saw one of your creations on eBay...Is that the normal pricing for your beauties? If so, well out of my reach! Gorgeous though!!!
Sent from my Nexus 6 using Tapatalk
-
@zrxoa1 said:
I saw one of your creations on eBay...Is that the normal pricing for your beauties? If so, well out of my reach! Gorgeous though!!!Sent from my Nexus 6 using Tapatalk
I'd say 90% of what I do falls into the 250-350 range. Depends on what options people want, and how many SAKs it takes for donor parts.
-
Well worth the cost, the workmanship is amazing. I have certainly never regretted my purchase.
-
A bit of yeoman action today. :D




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



