Leatherman Juice KF4 Review (A Visual Tour)
-
<u>Overview</u>
The KF4, though now retired, was introduced by Leatherman in 2001 with the launching the Juice line. It’s been released in “solar” yellow as well as “storm” grey. You’ll also see my customized beater in a few picks.As far as the tools go, the KF4 tool list reads like a fully equipped large multi-tool, with the notable exceptions of scissors and can/bottle openers. Everything on this tool solidly snaps open with back springs like a slip joint pocketknife.
All opened:

<u>Size</u>
The tool is a medium size; significantly smaller than most common full sized multi-tools, but a lot bigger than the standard keychain fare. For me it’s on the large side of “pocketable”.Measured in Inches:

For those who like things simple:

Larger than a Micra:

More pocketable than a PST:

Smaller than a Super Tool 200:

Thickness compared to a Juice S2:

<u>Plain Blade</u>
To me it’s a very nice length- just a hair over 2.5 inches (6.5 cm). That, along with its slip-joint design, keeps in legal in most places, but still long enough to be very useful. Its edge holding is nothing special, but it sharpens up quite easily.Plain Edge:

<u>Serrated Blade</u>
Same length as the plain blade, but the point comes down in a sheepsfoot pattern. The plain edge at the tip helps make up for lack of scissors if you keep it sharp. The serrations are designed well and cut effectively.Serrated Edge:

<u>File</u>
On both sides the cutting surface starts close to the handle and extends to the tip, giving the most usable edge possible. I’ve used the standard side on both wood and metal, and it’s worked great on both. On the other side, the diamond file is something special- very fine and yet quite aggressive. Lastly, there’s a “metal saw” on the edge, but to be honest it’s not all that functional.Standard File:

Diamond Coated:

<u>Awl</u>
The awl on the KF4 isn’t very sharp, but it is a handy feature, and works great for putting clean holes in drywall/plaster, and general poking around.The dull-but-handy Awl:

Next to Surge & PST:

<u>Saw</u>
It’s thin, it cuts well, and is amazingly long for the tool’s size. The saw is placed in the same slot as the awl, which needs to be opened to get to the saw.Saw & Awl Combo:

With a Super Tool 200:

<u>Ruler</u>
The KF4 was the only Juice to have a ruler printed on it’s scales:

<u>Pliers</u>
Though they are not as strong as a full sized Leatherman, they open wide. And more importantly, they feel nothing like a keychain. The wire cutters are small but functional, and the hard wire notch works well.Up Close:

With PST and Surge:

With Surge:

<u>Phillips</u>
Nicely cut, fits both #1 and #2 Phillips heads equally. I can use this as fast as a “real” screwdriver when it’s stretched out.“Stretched”:

Squared edges:

<u>Flat Drivers</u>
There are medium, small, and eyeglass sizes. All are chisel ground, but have worked well for screws and light prying.Medium:

Small:

Eyeglass:

<u>Lanyard Ring</u>
It’s small, and hides away in a cutout in the Phillips without wasting any extra space. It does require some tool, like a key, to open it.Hiding beside the Phillips:

Lanyard working out:

**Pros:
- Medium Size
- Lots of Functional Tools
- Diamond File
- Usually Legal
Cons:
- Smaller/Lighter Duty Pliers
- No Scissors, Can/Bottle Opener
- Mediocre Awl
- Non-locking
**
-
Hey hey hey! Very well done Luke!
I like that photo-heavy style you used. Outstanding quality pictures too! 8) -
:o Man that was a great review Luke very professional looking
Wish my pics had the clarity yours have :( I am gonna have to practice at that :ahhh You have done a great tribute to the humble KF4 
-
Bob beat me 2 the punch :D by like 15 whole seconds
-
Superb pics, really nicer review thx.
-
Great review mate, and stunning pictures

-
What they said! Great pics mate. Shame the tool doesn't have a bottle opener though. :P
-
God I still need one of those beauties.
-
Makes me want one! I really dig your review. Great job!
-
Wow! :o That is one superb review.

-
Thanks guys.
It was a fun way to spend an afternoon. :D -
Luke tops pics mate . I am going out on a limb buddy , but I reckon the KF4 is your favorite LM. :D :D :D
-
Damn it! You have no idea how much I want a KF4 now!!!
:'( :'(Why, oh why do you keep tormenting me with these KF4 threads, Luke?! :ahhh :D :D
-
-
@MultiMat said:
Luke tops pics mate . I am going out on a limb buddy , but I reckon the KF4 is your favorite LM. :D :D :DWell, based on carry time (and # of threads started about it), I'd have to call this my favorite all time MT.

Damn it! You have no idea how much I want a KF4 now!!!
:'( :'(Why, oh why do you keep tormenting me with these KF4 threads, Luke?! :ahhh :D :D
The man is evil. Pure evil. >:D :D
There's no other explanation.

-
personally I think Luke and Bob work for the MT companies! they take great tool pic's!
Well done NeitherExtreme, I'll wras-sel you for one Max! :P

-
I WANT MY KF4
-
Very good review.

-
Wow that guy Luke takes a great picture doesn't he? :)
-
Nice write-up dude! Grrr...now I want a KF4 even more!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login