Lansky sharpening system users.......
-
I have a Lansky system with 4 diamond hones, and it just sits on a shelf not being used. I do not regret buying it though.
These days, I prefer to sharpen freehand, but I found the Lansky system to be an excellent teaching aid before I moved to freehand. It was particularly useful when reprofiling, either to remove a chip or indent, or to correct a poor factory grind.
-
@50ft-trad said:
I have a Lansky system with 4 diamond hones, and it just sits on a shelf not being used. I do not regret buying it though.These days, I prefer to sharpen freehand, but I found the Lansky system to be an excellent teaching aid before I moved to freehand. It was particularly useful when reprofiling, either to remove a chip or indent, or to correct a poor factory grind.
It certainly is!

-
I love my Lansky. My carbon steel blades become razors using it.

-
I too have the Lansky 3 stone setup. After awhile I found a deal on the polish stone (sapphire one I think it was) so I picked it up just to have. I don't get into polished edges but if I decide to try something different I have that stone just waiting to be used! :)
The Lansky is only used for repairs or to reset a bevel etc. as mainly I just use the Sharpmaker or once in awhile the Lansky 4 rod setup to touch up the blades. The 4 rod turn box doesn't see much use though.
-
@sir_mike said:
I too have the Lansky 3 stone setup. After awhile I found a deal on the polish stone (sapphire one I think it was) so I picked it up just to have. I don't get into polished edges but if I decide to try something different I have that stone just waiting to be used! :)The Lansky is only used for repairs or to reset a bevel etc. as mainly I just use the Sharpmaker or once in awhile the Lansky 4 rod setup to touch up the blades. The 4 rod turn box doesn't see much use though.
I also have the 3 stone and sapphire polish stone setup
It doesn't get used much as I favor freehand sharpening as well but it does help repair edges very well 
-
@Aleph78 said:
Finally ordered the 3 stone Lansky system today, will get some pics in as soon as it arrives
Can't wait to see the pics buddy
Also to hear your thoughts on it after a bit of use 
-
I had to break out my Lansky yesterday. I have a Kershaw Black Horse 1060 Japan knife thats pretty much been a beater. The edge was pretty wrecked but its not a knife I use often or even cared about. I was fixing the edge on my Mora #2 and decided to finally take care of the Kershaw. BTW I didn't use the Lansky on the Mora.
I'll post up pics in a bit. I went thru the red ( 120 ) then green ( 280 ) then blue ( 600 ) then 3 micron diamond spray strop then green compound strop, and BOOM she's got such a wicked edge now. I used the 25 degree guide for this knife and didn't strop to a mirror just enough to smooth out the bevel and remove any trace of a burr.
Guys I can continue to recommend this tool for those who need to do work on your bevels.
-
Forgive the pics. I'll still need to work out the tip but the new bevel is certainly more even along the length of the blade. The angle is also even on both sides as well. I got this knife very used but its solid. Anyone know the steel on this? From what I gather its supposed to be 8cr13mov?
-
Beats me about the steel, but you did a good job on that edge.
-
@ducttapetech said:
Beats me about the steel, but you did a good job on that edge.The Lansky really does a good job at keeping the angle even on both sides. Along the length of the blade the previous owner/s tried to sharpen it and just went to steep. Grinding it to 25 degree per side gives it enough edge to be wicked and strong. I'm not gonna lie I've beat on this knife at camp sites and shes a tough one. Its fills my hand and feel great in it. Not sure what these sold for but it another flea market find for me so IIRC it was <$10 for sure. I do recall the blade being really covered with surface rust but I gave it a quick 0000 steel wool wipe and ceramic rod hone and off she went into my camp bag.
-
You done a very fine job bringing the edge back Aloha
I don't know if I have ever owned a Kershaw
A lot of people I know carry one but not me ??? I guess that's another brand I need to try :D -
Beats me about the steel, but you did a good job on that edge.
The Lansky really does a good job at keeping the angle even on both sides. Along the length of the blade the previous owner/s tried to sharpen it and just went to steep. Grinding it to 25 degree per side gives it enough edge to be wicked and strong. I'm not gonna lie I've beat on this knife at camp sites and shes a tough one. Its fills my hand and feel great in it. Not sure what these sold for but it another flea market find for me so IIRC it was <$10 for sure. I do recall the blade being really covered with surface rust but I gave it a quick 0000 steel wool wipe and ceramic rod hone and off she went into my camp bag.
If it's Japanese, I think it's an AUS type steel, AUS8 if I'm not mistaken. Chinese ones used the CrMoV steels, however.
-
Its Japanese and thank you. I used the knife to cut chicken last night. The blades edge is wickedly sharp and being an older user before I got it the lock up is solid.
-
@Poncho65 said:
You done a very fine job bringing the edge back Aloha
I don't know if I have ever owned a Kershaw
A lot of people I know carry one but not me ??? I guess that's another brand I need to try :DThanks. Kershaw has some nice models. Price point is nice too. If you are looking for a work horse with style then IMO you cannot go wrong.
-
ARISE!!!!!


I'm in this club for about a month now........what's the oil for?

I've got the kit with the 5 stones, I think the jaws were bent in transport, but hey, I can't have nice things so......

Feel I need to buy or build a pedestal, get the diamond stones as well as the rounded ones for recurves....
-
@Gerhard Gerber said:
ARISE!!!!!

I'm in this club for about a month now........what's the oil for?

I've got the kit with the 5 stones, I think the jaws were bent in transport, but hey, I can't have nice things so......

Feel I need to buy or build a pedestal, get the diamond stones as well as the rounded ones for recurves....
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!
My clamp was absolute garbage!! Still finding ways to try and improve it.
-
I have the 4 stone diamond system. It is great for recontouring a broken blade or for putting a new edge on a badly neglected knife but for everyday use I like the Eze lap freehand sharpeners followed by the vic pocket ceramic sharpener.
-
@NKlamerus said:
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!My clamp was absolute garbage!! Still finding ways to try and improve it.
Do you apply the oil while using the stones, or to clean afterwards?
I need practice, still get better results with the baby belt grinder and polisher, but I nicely stuffed up a new edge with the belt grinder, using the Lansky in future.
-
@Gerhard Gerber said:
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!
My clamp was absolute garbage!! Still finding ways to try and improve it.
Do you apply the oil while using the stones, or to clean afterwards?
I need practice, still get better results with the baby belt grinder and polisher, but I nicely stuffed up a new edge with the belt grinder, using the Lansky in future.
I usually do it during, I feel like it help lubricates the cutting.
I would strongly recommend the sharpie trick so you can keep track of the edge on every stone.
The stand they sell is pretty bad IMO, I use a small 3" bench vice or hold the actual tool in my hand if the blade hasn't been removed
-
I oil the stones whilst using them. Just a few drops on each is enough.
The clamp on mine sucks too, and is too big for SAKs. I need to come up with a Edge Pro-like solution if I can.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login