Lansky sharpening system users.......
-
You done a very fine job bringing the edge back Aloha
I don't know if I have ever owned a Kershaw
A lot of people I know carry one but not me ??? I guess that's another brand I need to try :D -
Beats me about the steel, but you did a good job on that edge.
The Lansky really does a good job at keeping the angle even on both sides. Along the length of the blade the previous owner/s tried to sharpen it and just went to steep. Grinding it to 25 degree per side gives it enough edge to be wicked and strong. I'm not gonna lie I've beat on this knife at camp sites and shes a tough one. Its fills my hand and feel great in it. Not sure what these sold for but it another flea market find for me so IIRC it was <$10 for sure. I do recall the blade being really covered with surface rust but I gave it a quick 0000 steel wool wipe and ceramic rod hone and off she went into my camp bag.
If it's Japanese, I think it's an AUS type steel, AUS8 if I'm not mistaken. Chinese ones used the CrMoV steels, however.
-
Its Japanese and thank you. I used the knife to cut chicken last night. The blades edge is wickedly sharp and being an older user before I got it the lock up is solid.
-
@Poncho65 said:
You done a very fine job bringing the edge back Aloha
I don't know if I have ever owned a Kershaw
A lot of people I know carry one but not me ??? I guess that's another brand I need to try :DThanks. Kershaw has some nice models. Price point is nice too. If you are looking for a work horse with style then IMO you cannot go wrong.
-
ARISE!!!!!


I'm in this club for about a month now........what's the oil for?

I've got the kit with the 5 stones, I think the jaws were bent in transport, but hey, I can't have nice things so......

Feel I need to buy or build a pedestal, get the diamond stones as well as the rounded ones for recurves....
-
@Gerhard Gerber said:
ARISE!!!!!

I'm in this club for about a month now........what's the oil for?

I've got the kit with the 5 stones, I think the jaws were bent in transport, but hey, I can't have nice things so......

Feel I need to buy or build a pedestal, get the diamond stones as well as the rounded ones for recurves....
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!
My clamp was absolute garbage!! Still finding ways to try and improve it.
-
I have the 4 stone diamond system. It is great for recontouring a broken blade or for putting a new edge on a badly neglected knife but for everyday use I like the Eze lap freehand sharpeners followed by the vic pocket ceramic sharpener.
-
@NKlamerus said:
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!My clamp was absolute garbage!! Still finding ways to try and improve it.
Do you apply the oil while using the stones, or to clean afterwards?
I need practice, still get better results with the baby belt grinder and polisher, but I nicely stuffed up a new edge with the belt grinder, using the Lansky in future.
-
@Gerhard Gerber said:
Oil is to clean the stones, when they get gunky with metal they get a sheen to them, and loss their effectiveness. Oil will float the shavings so they can be wiped off!
My clamp was absolute garbage!! Still finding ways to try and improve it.
Do you apply the oil while using the stones, or to clean afterwards?
I need practice, still get better results with the baby belt grinder and polisher, but I nicely stuffed up a new edge with the belt grinder, using the Lansky in future.
I usually do it during, I feel like it help lubricates the cutting.
I would strongly recommend the sharpie trick so you can keep track of the edge on every stone.
The stand they sell is pretty bad IMO, I use a small 3" bench vice or hold the actual tool in my hand if the blade hasn't been removed
-
I oil the stones whilst using them. Just a few drops on each is enough.
The clamp on mine sucks too, and is too big for SAKs. I need to come up with a Edge Pro-like solution if I can.
-
Thanks guys, probably saved me a few $$$

If it wasn't made out of smurf metal you could crank down and really hold onto the blade.....
Was there an update to the kit? on some YT videos the clamp has rubber at the jaw?
-
Deluxe Sharpening system is what I regularly use these days... and 25° angle... and strop afterwards...

Tried the sharpmaker for a while but sometimes my bevels are wider at the tip. And couldn’t even get factory sharp edges...
No problems with the Lansky... Didn’t go for the optional stand as my mini bench vice is sufficient enough... I also do freehand with these stones for my 58mm blades...
Sharpmaker is now used mainly to sharpen scissors...
Sent from my iPhone using Tapatalk
-
@Gerhard Gerber said:
Thanks guys, probably saved me a few $$$
If it wasn't made out of smurf metal you could crank down and really hold onto the blade.....
Was there an update to the kit? on some YT videos the clamp has rubber at the jaw?
Yep, there's a newer version with the rubber. Mine is the old pot metal (sintered?) version too. I've found it functional for most knives, but you definitely can't do much with especially large or small blades. It's a great system for the price. I got the 5-stone system for $32, and it's been a fantastic value. Added a sapphire stone to the lineup, but I still need to get the strop.
And on the topic of Japanese Kershaws, I'm pretty sure they are indeed AUS8.
-
I had the version with the rubber pads and ended up ripping them off.
Blue tape works best, I might try and dip the tips into liquid flex seal.
-
@Poncho65 said:
Stropping is a step I often overlook and forget
I usually just hit it a few strokes on a very fine diamond stone and it is back to shaving sharp 
**What kind of compound does everybody recommend for loading up a leather strop BTW **

I'm using Bark River black or green on SAKS, 1095 AUS-8 and other lower carbon steels.
I don't think you need diamond compound until you get into the high carbon vanadium steels. -
Why am I not surprised I bought the old version

And on the topic of Japanese Kershaws, I'm pretty sure they are indeed AUS8

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login