firearms
-
Nice grouping. How many meters?
25 feet would be about 7 or 8 meters.
In that case, very nice grouping.
Thanks.

-
Thanks.

Some years back I knew a wildlife rehabilitator (a person who cares for injured wildlife so it can be released back into the woods). He had several possums at various times and thought they were nice animals. However they do need some caution in handling as they have a lot of large sharp teeth.
-
Now it might be because we don't get them here, but am I weird in thinking that opossums are quite cute?

They don't bother me. I think they are cool looking. They are just a four legged buzzard with a rat tail. I know alot of people go out of there way to kill them, but I dont.
Me either, they don't carry rabies and I would real feel bad if I popped the party possum....

-
Nice grouping. How many meters?
25 feet would be about 7 or 8 meters.
In that case, very nice grouping.
Nice work Karl!!!
Nice Smith too!!! 
-
Nice grouping. How many meters?
25 feet would be about 7 or 8 meters.
In that case, very nice grouping.
Nice work Karl!!!
Nice Smith too!!! 
Thanks.

-
Picked up a rifled slug barrel for Dad's old 20ga. Mossberg today. Been wanting one to try sabots on hogs. Was glad to see that a 2015 barrel dropped right in a 1970's receiver.

-
Hope it works smoothly.

-
@ColoSwiss said:
Hope it works smoothly.
Thx Karl!!!! They are rooting about 40 yards from the house now so maybe I'll be out early or late and can get a shot.
-
@gdoolittle said:
That's an odd malfunction. In that extreme rearward position, the recoil spring is fully compressed....it could be binding as well. A replacement recoil spring might fix it but on a new gun I would want them to fix it or replace it.
Ironravens's mag idea is a good thing to check....any rub to the top of the mag lips or bottom of the slide?
Not that I have noticed. I shot about 70 more rounds the other day, gun ran smoothly with no malfunctions.
Good deal! Maybe it just needed a little range time!!

She has a total of 550 rounds through her now with one more malfunction. I caught it on video. Also a few times i noticed it hiccup when chambering a new round. I was able to recreate the problem when I got home. It happened near the 520 round mark i think.
What are your thoughts? It only actually locked back once during live fire. I have a video of it as evidence


-
As you can see the slide lock is not engaged
-
@gdoolittle said:
As you can see the slide lock is not engagedYeah....in my mind, 520 rds is plenty for a break in period. If you're going to carry or use it for self defense, it would bug me. You probably paid a lot of money for it and it should be worry free with no probs esp if it's a defensive gun.
If it were mine....
I would call Smith, then email them the pics/video. That's a weird kind of stoppage for no apparent reason. See if they will give you a different gun or look over yours. They may have a service center near you. Or get on the Smith gun boards and ask if anyone has had the same prob with that particular gun.
My prob is I haven't bought a new gun in 20+ years so I don't know what the norm is now. Maybe a couple stoppages in 500+ rounds is the norm for such a high tech compact pistol? There's a lot of technology in a small package there... "Back in the day" we didn't compete or carry a gun that wasn't 100% reliable but I'm out of touch since I don't own a firearm that was made after the mid 90's.

-
Yeah.... Have you someone who's gone through S&W's armourer's course for the M&P in your area? Something about that does look funky, maybe a bad spring.
Over 500 rounds, you're out of the break in period for a modern pistol from a major manufacturer. And what you're showing isn't normal.
When the slide is back like that, can you wiggle the barrel?
-
@ironraven said:
Yeah.... Have you someone who's gone through S&W's armourer's course for the M&P in your area? Something about that does look funky, maybe a bad spring.Over 500 rounds, you're out of the break in period for a modern pistol from a major manufacturer. And what you're showing isn't normal.
When the slide is back like that, can you wiggle the barrel?
I can wiggle the barrel. At least I think i can. I have also noticed that when I press check it i have to manually put the gun back into battery
-
@gdoolittle said:
Yeah.... Have you someone who's gone through S&W's armourer's course for the M&P in your area? Something about that does look funky, maybe a bad spring.
Over 500 rounds, you're out of the break in period for a modern pistol from a major manufacturer. And what you're showing isn't normal.
When the slide is back like that, can you wiggle the barrel?
I can wiggle the barrel. At least I think i can. I have also noticed that when I press check it i have to manually put the gun back into battery
Refresh my memory, did you replace the recoil spring? That slowing down/binding at the end of the stroke may be a bad/weak spring.
And your sure all the slide/frame bearing surfaces are clean, greased/oiled and burr free?
-
@gdoolittle said:
Yeah.... Have you someone who's gone through S&W's armourer's course for the M&P in your area? Something about that does look funky, maybe a bad spring.
Over 500 rounds, you're out of the break in period for a modern pistol from a major manufacturer. And what you're showing isn't normal.
When the slide is back like that, can you wiggle the barrel?
I can wiggle the barrel. At least I think i can. I have also noticed that when I press check it i have to manually put the gun back into battery
Refresh my memory, did you replace the recoil spring? That slowing down/binding at the end of the stroke may be a bad/weak spring.
And your sure all the slide/frame bearing surfaces are clean, greased/oiled and burr free?
I have not replaced the spring and all surfaces have been cleaned to the best of my ability. The pic is from after I was shooting, before the gun was cleaned after about 200 or so rounds.
-
@gdoolittle said:
As you can see the slide lock is not engaged
Yeah....in my mind, 520 rds is plenty for a break in period. If you're going to carry or use it for self defense, it would bug me. You probably paid a lot of money for it and it should be worry free with no probs esp if it's a defensive gun.
If it were mine....
I would call Smith, then email them the pics/video. That's a weird kind of stoppage for no apparent reason. See if they will give you a different gun or look over yours. They may have a service center near you. Or get on the Smith gun boards and ask if anyone has had the same prob with that particular gun.
My prob is I haven't bought a new gun in 20+ years so I don't know what the norm is now. Maybe a couple stoppages in 500+ rounds is the norm for such a high tech compact pistol? There's a lot of technology in a small package there... "Back in the day" we didn't compete or carry a gun that wasn't 100% reliable but I'm out of touch since I don't own a firearm that was made after the mid 90's.

No, not no but smurf no.
Ain't no Smith M&P that should not run out of the box.
When I was a PO in Detroit we had tons of M&P .40s and I never even heard of one not running likke a champ.
Smith is suppose to have great customer service I would contact them and have them sort it out.
-
@gdoolittle said:
As you can see the slide lock is not engaged
Yeah....in my mind, 520 rds is plenty for a break in period. If you're going to carry or use it for self defense, it would bug me. You probably paid a lot of money for it and it should be worry free with no probs esp if it's a defensive gun.
If it were mine....
I would call Smith, then email them the pics/video. That's a weird kind of stoppage for no apparent reason. See if they will give you a different gun or look over yours. They may have a service center near you. Or get on the Smith gun boards and ask if anyone has had the same prob with that particular gun.
My prob is I haven't bought a new gun in 20+ years so I don't know what the norm is now. Maybe a couple stoppages in 500+ rounds is the norm for such a high tech compact pistol? There's a lot of technology in a small package there... "Back in the day" we didn't compete or carry a gun that wasn't 100% reliable but I'm out of touch since I don't own a firearm that was made after the mid 90's.

No, if anything, things have got much better in the small auto scene. Two and a half years ago, I got a brand new Glock 26 gen 4 in 9mm. In the few thousand rounds I've put through the gun so far, there has not been a single malfunction of any kind. So it can be done. Any finicky behavior is not to be tolerated in a self defense type of pistol. I was a hard core died in the wool revolver man, and took a lot to bring me over to the Glock.
-
Great to see guys with the pertinent info on current tech post on the subject!!!!

-
Thanks all for the comments! I will be either taking it back to the shop i bought it at last month or sending it to smith soon
-
MORE problems with my new shield
The smurfing sight came out of the sight hole thing! Good grief. It came out as the slide went back after firing a round and hit me in the shoulder. You have got to be kidding me. I know fiber optics arent widely popular for ccw but these are supposed to be like cemented in there according to what i heard. I was just shooting her a little more before sending it to gun store i bought it from tomorrow so they can take a look. This on top of the recoil spring problem us just flat out frustrating. This is my first s&w. I bought performance center expecting top quality work.. i have heard that their customer service is good. We may find out shortly. I hope so. I really really want to love this gun. I'm trying to. I like the s&w company and I know from what I've read that this isn't normal with them. Hopefully this can get worked out quickly. Sorry for the
. I really want this to go well as buying a brand new gun is a big deal for me. Its disappointing to be having these issues at 650 rounds if the first month or two. Or really at any round count and time period.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
