Leatherman SIDEKICK / WINGMAN Owners Club
-
@hellsing said:
I'm weak, i know. I finally bought one wingman.I know i will be disappointed compared to my wave, surge st300, cs4 etc, but you know, it's MTO!
As the others have said; give the Wingman a fair chance, you might be pleasantly surprised. It will likely feel "different" to your other LM, but I still like my Sidekick very much.
-
[quote author=SurivStud link=topic=32239.msg1436268#msg1436268 date=1488853566]
[quote author=an0nemus link=topic=32239.msg1434883#msg1434883 date=1488633215]
I really like how smooth my Wingman is as there is no sharp edge or corner!Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
Thank you so much for this, SurivStud! Very helpful!
I'm curious to know how are the users' experiences of using WD40 on their Wingmans.
Anyone?
I use wd40 on work duty leathermans.
These tools get wet and dirty daily.
At the end of the week they get washed off, spayed with wd40 and thrown back in the tool bucket.My edc leathermans get whatever is handy.
Engine oil, nano oil, 3 in 1 machine oil etc etc.Thanks zoidberg. I'm now fully convinced
[/quote]Nano oil and 3 in 1 machine oil don't smell nearly as bad as engine oil and wd40 - something to consider if you work inside or around other people.
[/quote]
thanks, zoidberg.any idea what a silicon oil is? have you used one?
-
@LoopCutter said:
Wipe down the tools and apply to pivot points. The outer surfaces of handles not so much.
A slippery tool can be a dangerous tool, or accident about to occur.Another low order option is mineral oil, I use to wipe down higher carbon type tools, not always my SS leather mans that frequently unless nothing else is handy on job site.
Mineral oil also works good on my cutting boards, drives my wife nuts, thinking I used a gun oil on her meal prep accessories, [emoji6]
Sent from my iPhone using Tapatalk
Ah, wife uses virgin coconut oil for cooking, I just might try that one out also! :D
-
[quote author=an0nemus link=topic=32239.msg1436346#msg1436346 date=1488871882]
[quote author=SurivStud link=topic=32239.msg1436268#msg1436268 date=1488853566]
[quote author=an0nemus link=topic=32239.msg1434883#msg1434883 date=1488633215]
I really like how smooth my Wingman is as there is no sharp edge or corner!Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
Thank you so much for this, SurivStud! Very helpful!
I'm curious to know how are the users' experiences of using WD40 on their Wingmans.
Anyone?
I use wd40 on work duty leathermans.
These tools get wet and dirty daily.
At the end of the week they get washed off, spayed with wd40 and thrown back in the tool bucket.My edc leathermans get whatever is handy.
Engine oil, nano oil, 3 in 1 machine oil etc etc.Thanks zoidberg. I'm now fully convinced
[/quote]Nano oil and 3 in 1 machine oil don't smell nearly as bad as engine oil and wd40 - something to consider if you work inside or around other people.
[/quote]
thanks, zoidberg.any idea what a silicon oil is? have you used one?
[/quote]
Got a can of CRC 808 silicone that I use on rubik's cubes. Works good on door hinges and locks. Haven't tried it on a multitool yet though, maybe I should.
On second thoughts I will try it now with my OHT...
-
[quote author=zoidberg link=topic=32239.msg1436360#msg1436360 date=1488873924]
[quote author=an0nemus link=topic=32239.msg1436346#msg1436346 date=1488871882]
[quote author=SurivStud link=topic=32239.msg1436268#msg1436268 date=1488853566]
[quote author=an0nemus link=topic=32239.msg1434883#msg1434883 date=1488633215]
I really like how smooth my Wingman is as there is no sharp edge or corner!Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
Thank you so much for this, SurivStud! Very helpful!
I'm curious to know how are the users' experiences of using WD40 on their Wingmans.
Anyone?
I use wd40 on work duty leathermans.
These tools get wet and dirty daily.
At the end of the week they get washed off, spayed with wd40 and thrown back in the tool bucket.My edc leathermans get whatever is handy.
Engine oil, nano oil, 3 in 1 machine oil etc etc.Thanks zoidberg. I'm now fully convinced
[/quote]Nano oil and 3 in 1 machine oil don't smell nearly as bad as engine oil and wd40 - something to consider if you work inside or around other people.
[/quote]
thanks, zoidberg.any idea what a silicon oil is? have you used one?
[/quote]
Got a can of CRC 808 silicone that I use on rubik's cubes. Works good on door hinges and locks. Haven't tried it on a multitool yet though, maybe I should.
On second thoughts I will try it now with my OHT...
[/quote]
How is silicone on your OHT?By the way, my family just received a large cash gift and I suddenly had an impulse to buy another Leatherman. I did a quick research and considered getting a Charge Tti, Surge, Wave and Rebar. I was already in the Leatherman shop and about to buy a Surge when the wife said to think about it more. So I just postponed my purchase and bought a leather pouch in the meantime.
Since I really don't use my multitools much, I couldn't find a good enough reason to upgrade...for now.
I really like the size, pocket clip, scissors and springed pliers of my Wingman!
-
Big fan of both the Sidekick and Wingman. I got a Wave very shortly after having the other tools and what I can tell you is this, its AWESOME. I later got a Surge and well, its, AWESOMER.
IMO being a light user of your MT doesn't negate having either the Wave or Surge. Its more about capability. My suggestion would be if you end up deciding on either the Wave or Surge be sure to get the bit cards and extender.
-
@an0nemus said:
How is silicone on your OHT?By the way, my family just received a large cash gift and I suddenly had an impulse to buy another Leatherman. I did a quick research and considered getting a Charge Tti, Surge, Wave and Rebar. I was already in the Leatherman shop and about to buy a Surge when the wife said to think about it more. So I just postponed my purchase and bought a leather pouch in the meantime.
Since I really don't use my multitools much, I couldn't find a good enough reason to upgrade...for now.
I really like the size, pocket clip, scissors and springed pliers of my Wingman!
Your wife is smart. Avoid impulse buying.
A Wave is a baby Surge.Charge Tti is an expensive Wave, IMHO.
Do right by your needs and family. No need to impress us virtual friends, we accept you for just having interest!
Of course a Picture of leather pouch will will help calm my buying impluse[emoji33]
Sent from my iPhone using Tapatalk
-
How is silicone on your OHT?
By the way, my family just received a large cash gift and I suddenly had an impulse to buy another Leatherman. I did a quick research and considered getting a Charge Tti, Surge, Wave and Rebar. I was already in the Leatherman shop and about to buy a Surge when the wife said to think about it more. So I just postponed my purchase and bought a leather pouch in the meantime.
Since I really don't use my multitools much, I couldn't find a good enough reason to upgrade...for now.
I really like the size, pocket clip, scissors and springed pliers of my Wingman!
Your wife is smart. Avoid impulse buying.
A Wave is a baby Surge.Charge Tti is an expensive Wave, IMHO.
Do right by your needs and family. No need to impress us virtual friends, we accept you for just having interest!
Of course a Picture of leather pouch will will help calm my buying impluse[emoji33]
Sent from my iPhone using Tapatalk
So far it's all good. No problems with the oht after it's silicone bath. Still early days yet though.
I agree with what LoopCutter has said. Needs over wants. And take your time to choose a multitool, no rushing needed.
If you must treat yourself then consider something like a rambler (victorinox) or i3s (olight) for your key ring, less expensive and still very useful.
-
Hello good Wingman/Sidekick owners. I bought a Wingman from Walmart.ca last week. It sure comes in some unusually tough packaging.
I haven't opened it yet, but notice odd rust like color between the printed letters on the handles. There's also circles of this color on the handles around the pivot screws. Below is a close up photo.
Do you think this is rust? It also kind of looks like it could be stamped plated metal with a copper colored core and a silver color plated surface. Anyone know?
Thanks


-
Sensible bunch!
-
@Aloha007 said:
Big fan of both the Sidekick and Wingman. I got a Wave very shortly after having the other tools and what I can tell you is this, its AWESOME. I later got a Surge and well, its, AWESOMER.IMO being a light user of your MT doesn't negate having either the Wave or Surge. Its more about capability. My suggestion would be if you end up deciding on either the Wave or Surge be sure to get the bit cards and extender.
I can imagine how it feels! The Charge Tti package does come with the bitkit and pocketclip, but I can't bring myself to buy it as its also a midsize MT like my Wingman.
But I'm sure down the road I'll get a Bit Kit just so to complete the accessories.
-
How is silicone on your OHT?
By the way, my family just received a large cash gift and I suddenly had an impulse to buy another Leatherman. I did a quick research and considered getting a Charge Tti, Surge, Wave and Rebar. I was already in the Leatherman shop and about to buy a Surge when the wife said to think about it more. So I just postponed my purchase and bought a leather pouch in the meantime.
Since I really don't use my multitools much, I couldn't find a good enough reason to upgrade...for now.
I really like the size, pocket clip, scissors and springed pliers of my Wingman!
Your wife is smart. Avoid impulse buying.
A Wave is a baby Surge.Charge Tti is an expensive Wave, IMHO.
Do right by your needs and family. No need to impress us virtual friends, we accept you for just having interest!
Of course a Picture of leather pouch will will help calm my buying impluse[emoji33]
Sent from my iPhone using Tapatalk
After reading various reviews, those are the same conclusions I came up with! Its either I upsize (Surge) or downsize (pockettools) relative to my Wingman.
In the meantime, to satisfy the urge, I got this for my Wingman for around $9. Its a bit big for it, though. But I like the horizontal carry feature.

-
How is silicone on your OHT?
By the way, my family just received a large cash gift and I suddenly had an impulse to buy another Leatherman. I did a quick research and considered getting a Charge Tti, Surge, Wave and Rebar. I was already in the Leatherman shop and about to buy a Surge when the wife said to think about it more. So I just postponed my purchase and bought a leather pouch in the meantime.
Since I really don't use my multitools much, I couldn't find a good enough reason to upgrade...for now.
I really like the size, pocket clip, scissors and springed pliers of my Wingman!
Your wife is smart. Avoid impulse buying.
A Wave is a baby Surge.Charge Tti is an expensive Wave, IMHO.
Do right by your needs and family. No need to impress us virtual friends, we accept you for just having interest!
Of course a Picture of leather pouch will will help calm my buying impluse[emoji33]
Sent from my iPhone using Tapatalk
So far it's all good. No problems with the oht after it's silicone bath. Still early days yet though.
I agree with what LoopCutter has said. Needs over wants. And take your time to choose a multitool, no rushing needed.
If you must treat yourself then consider something like a rambler (victorinox) or i3s (olight) for your key ring, less expensive and still very useful.
I do have some non-Leatherman pockettools around, but not a true MT heavy weight. I think I'll buy that Surge anytime soon when there's a sale as its currently being sold at $160 here at full retail price with 25 year warranty.
Last night though I saw this unused Texas Tool Crafters item on sale for only $140, unfortunately I was late by a day as someone bought it already!



Tsk, tsk, tsk.
In the meantime, I'm still enjoying my Wingman as my first LM tool!
-
@jlomein said:
Hello good Wingman/Sidekick owners. I bought a Wingman from Walmart.ca last week. It sure comes in some unusually tough packaging.I haven't opened it yet, but notice odd rust like color between the printed letters on the handles. There's also circles of this color on the handles around the pivot screws. Below is a close up photo.
Do you think this is rust? It also kind of looks like it could be stamped plated metal with a copper colored core and a silver color plated surface. Anyone know?
Thanks


Looks like rust to me, jlomein. But wait for the experts opinion here.
-
@an0nemus said:
[quote author=LoopCutter link=topic=32239.msg1438633#msg1438633 date=1489254562]
[quote author=an0nemus link=topic=32239.msg1438408#msg1438408 date=1489214979]
After reading various reviews, those are the same conclusions I came up with! Its either I upsize (Surge) or downsize (pockettools) relative to my Wingman.In the meantime, to satisfy the urge, I got this for my Wingman for around $9. Its a bit big for it, though. But I like the horizontal carry feature.

Thank you for the pic of the sheath, I have the same that came with a 2004 Wave. Also, picked another to hold my bits and extension and a SAK climber.
A Surge sounds like a good fit from your description. That Texas model was a good price, but not certain your exchange rates. You are in Phillipines?
All the best.
Sent from my iPhone using Tapatalk
-
@jlomein said:
Hello good Wingman/Sidekick owners. I bought a Wingman from Walmart.ca last week. It sure comes in some unusually tough packaging.I haven't opened it yet, but notice odd rust like color between the printed letters on the handles. There's also circles of this color on the handles around the pivot screws. Below is a close up photo.
Do you think this is rust? It also kind of looks like it could be stamped plated metal with a copper colored core and a silver color plated surface. Anyone know?
Thanks


I suspect it is a thin oil coating applied to non US shipped products.
The Wingman is made of stainless steel, a very rust resistant metal.
Just remember your LM has a 25 year warranty.
Sent from my iPhone using Tapatalk
-
@LoopCutter--
Yup, I'm here in the Philippines. That unused Texas Surge sold for PHP 7,000 or US$140, at the current exchange rate. A brand new, full retail, full warranty Surge here costs PHP 7,900.
There is a brand new Black Oxide Surge that costs US$130 with black leather sheath, but it has no official warranty. But I don't like black as I prefer shiny tools to look at :)
-
@an0nemus said:
Looks like rust to me, jlomein. But wait for the experts opinion here.Thank you for your input. :)
I suspect it is a thin oil coating applied to non US shipped products.
The Wingman is made of stainless steel, a very rust resistant metal.
Just remember your LM has a 25 year warranty.
You could be right, I do remember my Glock coming with a reddish copper like lubricant under the slide. Thanks for the reply.
I guess I can open it now to verify. Initially I was concerned it could have been a fake that Walmart accepted as a return and put back in stock.
I could really use the Wingman's clamshell plastic opener on this indestructible packaging...I'll need to find a used Wingman to open this one! :D
-
I'm weak, i know. I finally bought one wingman.
I know i will be disappointed compared to my wave, surge st300, cs4 etc, but you know, it's MTO!
I think you might be surprised. The spung pliers are really nice. Over all the tool is pretty nice as well. Congrats.
Indeed, it's quite correct. The file is totally worthless, but the rest is descent.
I'm a bit disappointed by the scissor, they aren't one hand opening on my wingman.
And sadly a wave blade can't go in.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
