Amorphous April Multi-Plier Challenge - JOIN NOW !
-
@Troels said:
Great shots guys
I agree with loopcutter that the truth usually comes out in these monthly challenges ;)
Gerber being the ugly duckling :ahhh :ahhh
Poncho, I thought for a second that you had been cutting concrete with the grey dust on saw

Need one of the Remgrit blades and blade exchangers to do that probably
:D -
Great shots guys

I agree with loopcutter that the truth usually comes out in these monthly challenges ;)
Gerber being the ugly duckling :ahhh :ahhh
Poncho, I thought for a second that you had been cutting concrete with the grey dust on saw

Need one of the Remgrit blades and blade exchangers to do that probably
:DI know that feeling :D
-
Nothing exciting here today. No uses for the Gerber.
My son brought me a sandwich home from TGIFridays. Called a Buffalo Wing Burger. Those wings were toothpicked to the top of the burger, which was loaded with cheeses and sauces....Very good. Still trying to finish everything!

Sent from my Nexus 6 using Tapatalk
-
I think the MP would be more useful to me with a different blade. That Wharncliffe blade is not something I like. I'd prefer a regular blade. Very hard to open as the nail nick is on the INSIDE!
Sent from my Nexus 6 using Tapatalk
-
Mine...


Sent from my Nexus 6 using Tapatalk
-
More Day 7...
I have added some Leatherman parts to the equation... Hopefully this allow more versatility of my Gerber...




Sent from my Nexus 6 using Tapatalk
-
That bit adapter adds a lot of versatility to any square bit phillips MT
I have already used it on mine this week and it performed wonderfully

-
@Poncho65 said:
That bit adapter adds a lot of versatility to any square bit phillips MT
I have already used it on mine this week and it performed wonderfully

Now, I need to replace that nasty Wharncliffe blade and I'd be much happier. Though, to be honest, I really don't expect the Gerber to ever replace my load of Leathermans, I can see the appeal to some folks.
Sent from my Nexus 6 using Tapatalk
-
I think I need to oil mine so I can flick it out better
That part is fun :D -
@Poncho65 said:
I think I need to oil mine so I can flick it out better
That part is fun :DThe unit I sent in to Gerber to fix that nasty blade...

...it flicked easily.They chose to send me a brand new Pro Scout with the Wharncliffe blade (which I hate....But they were very gracious to send the new tool!!)
I have been setting here watching TV and flicking the tool out over and over. It's getting better!
We are getting ready for a quick trip (about 3 hours or so...) to Nashville, TN for dinner and to hang out. The Gerber will be with me the entire time.
Sent from my Nexus 6 using Tapatalk
-
If the blade and scissor is swapped around on the Pro Scout then the nail nick on blade is accessible.
I have put scissors in the opposit position on my mp600 for this challenge (see the earlier photo). This makes the scissors nail nick point inward but the scissors are still pretty easy to get out IMO.The remgrit saw holder cannot be placed in the opposite position... I just tried swapping the blade and the saw holder

Standard position on the Pro Scout

Peeled apart

Swapped around

BUT the saw holder blocks the sliding plier head


Its a very little difference but enough to block the pliersSo dont do this swap :D ... but a swap between the scissors and blade should expose the nail nick on the blade (and hide it on scissors) as already noted.
I have not done this with the full set of pro scout tools so maybe I missed a potential issue.Edit: The blocking issue could be solved by putting in extra spacers to align the saw holder properly (?). I will try it at some point.
-
Day 7 at tech rehearsal.

-
Day 7 - TGIF
-
I think I need to oil mine so I can flick it out better
That part is fun :DThe unit I sent in to Gerber to fix that nasty blade...

...it flicked easily.They chose to send me a brand new Pro Scout with the Wharncliffe blade (which I hate....But they were very gracious to send the new tool!!)
I have been setting here watching TV and flicking the tool out over and over. It's getting better!
We are getting ready for a quick trip (about 3 hours or so...) to Nashville, TN for dinner and to hang out. The Gerber will be with me the entire time.
Sent from my Nexus 6 using Tapatalk
I was in Nashville today as I am every work day ::) :D Have a great time

-
Another awesome day guys
We are already one week into this challenge :o I am getting more use to this MT and I am sure by the end of the month I will have a new appreciation for Gerbers
I have been on ebay already looking to grab a different model on the cheap so I can try something else of there out sometime
:D -
I think I need to oil mine so I can flick it out better
That part is fun :DThe unit I sent in to Gerber to fix that nasty blade...

...it flicked easily.They chose to send me a brand new Pro Scout with the Wharncliffe blade (which I hate....But they were very gracious to send the new tool!!)
I have been setting here watching TV and flicking the tool out over and over. It's getting better!
We are getting ready for a quick trip (about 3 hours or so...) to Nashville, TN for dinner and to hang out. The Gerber will be with me the entire time.
Sent from my Nexus 6 using Tapatalk
I was in Nashville today as I am every work day ::) :D Have a great time

Just got here. At La Quinta Inn just off I 65 exit 97...
Had to gulp some coffee drinks to make the drive...I hate driving! Haha!

Sent from my Nexus 6 using Tapatalk
-
-
Day 8
Very early morning for me. Here's Mr. Pinchy amidst the thorns of a Bougainvillea, and reaching for the moon.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

