The (Great?) Workout Thread.
-
Well you guys are moving around some serious weights.

And here I am being proud of myself for finally getting to the fifth repetition of dead lift with 150 kg. Oh well, we cant all be superman can we?

At least I might be able to be proud of some of my DIY exercise equipment I made recently. How about an ab wheel that can support at least 400 kg? :D

-
150kg is still more than most will ever move so great going.
and what did you use for that ab wheel?
-
Two wheels rated for 200 kg load and 50 cm long steel bar with 2 cm diameter, all bought at a hardware store. I was sick and tired of cheap plastic ones (I went through two of them). I figure this one is pretty much as indestructible as any ever made...

On related note, I really feel this one of the best and most neglected ab exercises out there. 15 reps with full extension and 2 x 15 reps of hanging leg raises (feet to the bar) is all I do in a week. And I am sure that my abs are stronger than when I did half an hour of hard ab exercises a week.

-
@lister said:
Two wheels rated for 200 kg load and 50 cm long steel bar with 2 cm diameter, all bought at a hardware store. I was sick and tired of cheap plastic ones (I went through two of them). I figure this one is pretty much as indestructible as any ever made...
**
On related note, I really feel this one of the best and most neglected ab exercises out there. 15 reps with full extension and 2 x 15 reps of hanging leg raises (feet to the bar) is all I do in a week. And I am sure that my abs are stronger than when I did half an hour of hard ab exercises a week.**
And you're right. Rollouts helped a lot of people move a lot of weight. If Brian Shaw can use them to great effect, no reason we can't too
-
Two wheels rated for 200 kg load and 50 cm long steel bar with 2 cm diameter, all bought at a hardware store. I was sick and tired of cheap plastic ones (I went through two of them). I figure this one is pretty much as indestructible as any ever made...

**
On related note, I really feel this one of the best and most neglected ab exercises out there. 15 reps with full extension and 2 x 15 reps of hanging leg raises (feet to the bar) is all I do in a week. And I am sure that my abs are stronger than when I did half an hour of hard ab exercises a week.**
And you're right. Rollouts helped a lot of people move a lot of weight. If Brian Shaw can use them to great effect, no reason we can't too
Ok, I googled the guy, how the smurf is he able to do ab rollouts? With all the muscle he must stop at 45 degree angle as his chest is already touching the ground. Or maybe he uses a olympic bar over a canal (the kind found in car repair shop).

The only bad thing with this exercise is, there is no intermittent step between doing it from the knees and doing it standing. That caused me quite a lot of problems before I was able to do the first rep. After that it goes easier. But it is still a smurfing hard exercise! :D
-
well I still face plant when doing it from the feet.

You can see the video somewhere on his Instagram. Big dude but he can still move pretty well
-
I can confirm face planting repeatedly is the standard progression to standing ab rollout...

-
do you use common sense?
I guess
I basically learned as I went, along with some research here and there. I have my own equipment as I wouldn't enjoy the public setting of a gym, so a trainer or spotter isn't an option. I eased into it, and have learned how far I can push myself for the most part. No injuries so far :)Proud SAKMC member :)
That counts as a coach

Proud SAKMC member :)
-
@lister said:
Well you guys are moving around some serious weights.
And here I am being proud of myself for finally getting to the fifth repetition of dead lift with 150 kg. Oh well, we cant all be superman can we?

At least I might be able to be proud of some of my DIY exercise equipment I made recently. How about an ab wheel that can support at least 400 kg? :D
Nice job on the roller
Ad for 150kg deadlift, I don't know what that is in pounds. I don't do deadlifts though. It's not an exercise I've really gotten into, and I don't have the weights to do it beyond a certain point.Proud SAKMC member :)
-
@lister said:
Well you guys are moving around some serious weights.
And here I am being proud of myself for finally getting to the fifth repetition of dead lift with 150 kg. Oh well, we cant all be superman can we?

At least I might be able to be proud of some of my DIY exercise equipment I made recently. How about an ab wheel that can support at least 400 kg? :D
Nice roller! I think I'll make one too. Thanks!
-
Well you guys are moving around some serious weights.

And here I am being proud of myself for finally getting to the fifth repetition of dead lift with 150 kg. Oh well, we cant all be superman can we?

At least I might be able to be proud of some of my DIY exercise equipment I made recently. How about an ab wheel that can support at least 400 kg? :D
Nice job on the roller
Ad for 150kg deadlift, I don't know what that is in pounds. I don't do deadlifts though. It's not an exercise I've really gotten into, and I don't have the weights to do it beyond a certain point.Proud SAKMC member :)
You should try romanian deadlifts first or good mornings. Theres this curved back thing that a lot of first time deadlifters do.
-
Well you guys are moving around some serious weights.

And here I am being proud of myself for finally getting to the fifth repetition of dead lift with 150 kg. Oh well, we cant all be superman can we?

At least I might be able to be proud of some of my DIY exercise equipment I made recently. How about an ab wheel that can support at least 400 kg? :D
Nice job on the roller
Ad for 150kg deadlift, I don't know what that is in pounds. I don't do deadlifts though. It's not an exercise I've really gotten into, and I don't have the weights to do it beyond a certain point.Proud SAKMC member :)
You should try romanian deadlifts first or good mornings. Theres this curved back thing that a lot of first time deadlifters do.
Cool, thanks for the info
I'll have to check them out.Proud SAKMC member :)
-
Well you guys are moving around some serious weights.

And here I am being proud of myself for finally getting to the fifth repetition of dead lift with 150 kg. Oh well, we cant all be superman can we?

At least I might be able to be proud of some of my DIY exercise equipment I made recently. How about an ab wheel that can support at least 400 kg? :D
Nice job on the roller
Ad for 150kg deadlift, I don't know what that is in pounds. I don't do deadlifts though. It's not an exercise I've really gotten into, and I don't have the weights to do it beyond a certain point.Proud SAKMC member :)
that is 330lbs. 3 big plates per side plus some smaller ones in gym math.
most people can fairly easily get to 1.5 times their bodyweight on the deadlift and squat, takes a bit of work (depending on age, mileage and injuries) to get to 2 times bodyweight, very small percentage comes to 3 times bodyweight and elite level lifters come to 4 times bodyweight.as far as deadlifts, my only advice is not to do sumo. last wednesday I was helping my friend/coach at the gym with a few new members and hit my nuts while pulling sumo
-
Spoiler:
:D -
Dead lifts are a serious matter, so stop smiling!


-
a kid in the gym got asked today what is the reason he is there and why is he looking up to everyone who can move some decent weight. apparently me saying that the kid wants to do a piledriver on a great white shark was not the answer the smurfhole asking was expecting
-
There are always smurfholes in gyms. I don't know whybut, there are... :ahhh
-
To be fair there are a lot of little things that annoy me and they are all related to etiquette or what can only be described as faulty logic.
On the other hand things that make me blow a gasket fall in the category of "this is why we used to throw kids to the wolves" (more commonly known as the herd needs thinning, natural selection has failed us or this smurfer should be drowned in the gene pool).
Etiquette are things like walking too close behind or in front of someone in the middle of a set, stepping over a bar on a lifting platform while someone is getting set up to lift, not wiping down the equipment (my former gym and the current one have little spray bottles with something to disinfect the surface and paper towels to wipe it off), jumping in to spot in the middle of the set (nice thought but it can distract the person lifting), hogging a lot of equipment and over 10 minute rest periods (we had a guy have a hissy fit because people took the bar, plates and the bench he was working on because he only took a little breather that lasted 20 minutes).
Faulty logic mostly refers to female clothing and men being men. On one hand the scantly dressed women can't expect no one to stare at them, on the other it is not THE place to try and pick up women (especially if you're hitting on someone 26 years younger than yourself).
The blow a gasket stuff is not putting the plates back, taking plates off the bar without checking if the bar is being used (few weeks ago some chick took a plate off the bar as i was about to unrack the weight) and correcting someone's form in the middle of the set (especially if they have a coach beside them). Well to name a few
-
And that is why I listen to audiobooks all the time. In gym, while driving, on public transport, while walking... :D
On the positive side of things, that enabled me to participate in the madness that is MTO...
-
Which reminds me that I gotta get a new MP3 player for those things
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login