Leatherman PST chronology project
-
Zed that Mamiya PST is also a nice one and I can't wait to see pics from you when it gets here

Thanks poncho,they are my pics :D I've carried it daily since getting it

Ok gotcha
I need to get one of mine out and carry it
Maybe for throwback Thursday 
I find the pst a good very compact MT if you can do without a few tools like a saw ,my dime has scissors so that's covered,it's my only MT that will fit in my little pouch that clips inside my front jeans pocket,a pouch that usually carried my stockman,I'm making a new pouch at the moment for it and for my spirit 👍
-
Zed that Mamiya PST is also a nice one and I can't wait to see pics from you when it gets here

Thanks poncho,they are my pics :D I've carried it daily since getting it

Ok gotcha
I need to get one of mine out and carry it
Maybe for throwback Thursday 
I find the pst a good very compact MT if you can do without a few tools like a saw ,my dime has scissors so that's covered,it's my only MT that will fit in my little pouch that clips inside my front jeans pocket,a pouch that usually carried my stockman,I'm making a new pouch at the moment for it and for my spirit 👍
Sounds good and I can't wait to see pics of the new sheath

-
[quote author=Poncho65 link=topic=5877.msg1421879#msg1421879 date=1486218740]
Zed that Mamiya PST is also a nice one and I can't wait to see pics from you when it gets here

Thanks poncho,they are my pics :D I've carried it daily since getting it

Ok gotcha
I need to get one of mine out and carry it
Maybe for throwback Thursday 
I find the pst a good very compact MT if you can do without a few tools like a saw ,my dime has scissors so that's covered,it's my only MT that will fit in my little pouch that clips inside my front jeans pocket,a pouch that usually carried my stockman,I'm making a new pouch at the moment for it and for my spirit 👍
Sounds good and I can't wait to see pics of the new sheath

[/quote]Been meaning to mod my PST 1.5 with a saw and never have gotten around to it yet

-
Hello there,
New joiner writing from France, owner of a PST II for many years, here are my specs:• Rivets or knurled screws?
screws
• Lanyard attachment?
yes
• (Old) small diameter or (new) large diameter plier pivot?
large
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL?
LEATHERMAN TOOL
• A hard wire cutter notch?
yes
• Handles stamped with what? (see pictures in next post for examples)
LEATHERMAN PST II ; PORTLAND OR
• Inch ruler only, or inch/metric?
inch/metric
• Date codes?
0302 / 0302
• Drop point knife blade or clip point? (saber?)
drop point and dented like a saw... not sure how to describe, but it cuts like hell !
• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN?
LEATHERMAN
• Screwdrivers: pivot-in or pivot-out?
Not sure waht this is...pictures:




Hope it helps :)
AlxI -
Great pics of that PST II

Already welcomed you in another thread and thanks for joining in

-
-
Couple of rarities :)
BO: 0103 0103
SS: 0504 0304Very nice (and very uncommon)

+1

-
The SS one is probably some of the last ones made period :o Wonder what is the latest (newest) datecode with the regular run of PSTs

-
-
-
3] Late 1985 – early 1989 Made in Japan concurrently
• Riveted construction
• Hollow base rivets
• No lanyard attachment
• Small diameter plier pivot
• Staked plier pivot
• Only LEATHERMAN cast into plier pivot
• No hard wire cutter notch
• One handle stamped: LEATHERMAN TOOL, US PAT 4238862, PORTLAND OR
• Other handle stamped POCKET SURVIVAL TOOL
• Inch ruler only, no metric
• No date codes[/b]
(Note some Japan tools appear to have handles obtained from the same source as some USA tools)**
• Drop point knife blade
• Knife tang stamped LEATHERMAN JAPAN
• Milled awl blade
• Off center screwdrivers pivot IN
• Can opener has left hand cut**
(Note Japan tools appear to have several of their blades obtained from the same source as USA tools)On the pictures, one is dated 05/95 on right and one not dated on left. Left one has solid rivets, leatherman tool us reg'd tm 1325473 on one side of one handle.
Has the sharp awl as well. Blade has different shape and inches only ruler.
The 1995 is marked leatherman tool us reg tm 1325473 on one side of both handles, and also has knurled screws and a short almost useless awl.
One handle is marked 0495 for the date and 0595 one the other handle.
They have identical phillips drivers and can opener. The older pst has no writing on the file and seems less agressive. Also, the files are opposite eachother. Cross file faces into the tool and the 95 model file faces the outside of the handle. Pictures of them attached. Forgive the condition on the older pst, as it saw two years of hard use before it was retired. I got it a few years ago and it was almost brand new and I did not know what I had. Now I am starting the MT hobby, I know it was not the right tool for the job I had and it suffered greatly. Pulling staples, nails, etc. Drivers used as pry bars, phillips stripped, and I did not do rust prevention on it.Also, is there any correlation between the age and how far the handles are spread apart? The older pst is very hard to squeeze and the 1995 pst has closer handles and is easier to operate. Is this the way it is supposed to be?
Many thanks in advance!
EDIT: I tried to determine the age by the chart and info, but I did not see info regarding the handle spread.

-
Great looking PSTs :o The handle splay is in all the older model PSTs and I am about to start work or I would look more closely at the pics and see if we could possibly put a date on the older one
Thanks for sharing though 
-
Welcome to the forum - Thanks for posting
Yeah
I think the left hand one is a Japanese PST - You can tell by the large lettering for 'LEATHERMAN' on the handles
Can you see JAPAN on the blade?I think the JPSTs had the wider spread - But I am no expert - Wait for one of the gurus to come along
PS. No need to quote the whole of the first thread

-
@Poncho65 said:
Great looking PSTs :o The handle splay is in all the older model PSTs and I am about to start work or I would look more closely at the pics and see if we could possiblt put a date on the older one
Thanks for sharing though 
Thank you for the responses and kind words! I will take some better (non phone cam) pics this evening.
I have since bought a surge, sp300, rebar, oht, skeletool, wingman, squirt es4, micra, and juice xe7. But, whenever I need to look sharp, the pst and it's almost unnoticeable leather sheath still gets some action.
Thank you huntsman, and I will edit out the original quote. I should have thought that through a bit better. Haha. EDIT: Too late to modifiy, but maybe mod can clean up the first post being overly quoted, if they do not mind of course. -
Nice PST's glbm

Welcome to the forum

-
Edited
Doing this from my phone so little harder than from a regular computer or laptop ::) :D Hopefully I kept the info that needed to be :D -
In regards to the splay I also have a very early PST with knurled screws instead of rivets (USA made
) and the splay is also wider than the newer model PSTs 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D
:D