Leatherman PST chronology project
-
Couple of rarities :)
BO: 0103 0103
SS: 0504 0304Very nice (and very uncommon)

+1

-
The SS one is probably some of the last ones made period :o Wonder what is the latest (newest) datecode with the regular run of PSTs

-
-
-
3] Late 1985 – early 1989 Made in Japan concurrently
• Riveted construction
• Hollow base rivets
• No lanyard attachment
• Small diameter plier pivot
• Staked plier pivot
• Only LEATHERMAN cast into plier pivot
• No hard wire cutter notch
• One handle stamped: LEATHERMAN TOOL, US PAT 4238862, PORTLAND OR
• Other handle stamped POCKET SURVIVAL TOOL
• Inch ruler only, no metric
• No date codes[/b]
(Note some Japan tools appear to have handles obtained from the same source as some USA tools)**
• Drop point knife blade
• Knife tang stamped LEATHERMAN JAPAN
• Milled awl blade
• Off center screwdrivers pivot IN
• Can opener has left hand cut**
(Note Japan tools appear to have several of their blades obtained from the same source as USA tools)On the pictures, one is dated 05/95 on right and one not dated on left. Left one has solid rivets, leatherman tool us reg'd tm 1325473 on one side of one handle.
Has the sharp awl as well. Blade has different shape and inches only ruler.
The 1995 is marked leatherman tool us reg tm 1325473 on one side of both handles, and also has knurled screws and a short almost useless awl.
One handle is marked 0495 for the date and 0595 one the other handle.
They have identical phillips drivers and can opener. The older pst has no writing on the file and seems less agressive. Also, the files are opposite eachother. Cross file faces into the tool and the 95 model file faces the outside of the handle. Pictures of them attached. Forgive the condition on the older pst, as it saw two years of hard use before it was retired. I got it a few years ago and it was almost brand new and I did not know what I had. Now I am starting the MT hobby, I know it was not the right tool for the job I had and it suffered greatly. Pulling staples, nails, etc. Drivers used as pry bars, phillips stripped, and I did not do rust prevention on it.Also, is there any correlation between the age and how far the handles are spread apart? The older pst is very hard to squeeze and the 1995 pst has closer handles and is easier to operate. Is this the way it is supposed to be?
Many thanks in advance!
EDIT: I tried to determine the age by the chart and info, but I did not see info regarding the handle spread.

-
Great looking PSTs :o The handle splay is in all the older model PSTs and I am about to start work or I would look more closely at the pics and see if we could possibly put a date on the older one
Thanks for sharing though 
-
Welcome to the forum - Thanks for posting
Yeah
I think the left hand one is a Japanese PST - You can tell by the large lettering for 'LEATHERMAN' on the handles
Can you see JAPAN on the blade?I think the JPSTs had the wider spread - But I am no expert - Wait for one of the gurus to come along
PS. No need to quote the whole of the first thread

-
@Poncho65 said:
Great looking PSTs :o The handle splay is in all the older model PSTs and I am about to start work or I would look more closely at the pics and see if we could possiblt put a date on the older one
Thanks for sharing though 
Thank you for the responses and kind words! I will take some better (non phone cam) pics this evening.
I have since bought a surge, sp300, rebar, oht, skeletool, wingman, squirt es4, micra, and juice xe7. But, whenever I need to look sharp, the pst and it's almost unnoticeable leather sheath still gets some action.
Thank you huntsman, and I will edit out the original quote. I should have thought that through a bit better. Haha. EDIT: Too late to modifiy, but maybe mod can clean up the first post being overly quoted, if they do not mind of course. -
Nice PST's glbm

Welcome to the forum

-
Edited
Doing this from my phone so little harder than from a regular computer or laptop ::) :D Hopefully I kept the info that needed to be :D -
In regards to the splay I also have a very early PST with knurled screws instead of rivets (USA made
) and the splay is also wider than the newer model PSTs 
-
Thank y'all for the info and responses! Now I know! I had believed all pst' had the wide splay until I got the 1995 model. That was definitely an improvement!

-
I haven't read the entirety of the thread, but I have a PST with a date code of 0601, and my blade says "Leatherman" and "USA." If you look close you can see both in the same shot.
-
Welcome to the forum AKB

-
Welcome.
-
Welcome to
and great MT the PST

-
Just received a large batch of PSTs today!
Most are in decent quality. Interestingly, 4 of them are of different built/time. 2 does not have date codes. I have quite a bit of PSTs in my collection. These are a rather interesting find to add on!
One in particular have only inches measurement on the handle and have rather rounded frame. Gotta look at the time line to figure things out.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D
:D