Swisstool X (Plus ?) - Initial thoughts.
-
Well that was an expected review. :D
Good review though mate. :) I can't say I necessarily agree on all your points ( the locks for example are the best I have ever used on a MT ) but it is nice to see a change from the usual Swisstool praise from someone who has genuinely given it a go.
One thing I will say though is that the Swisstool grew on me the longer I had it. It took me a while to appreciate it for what it is.
@Leatherman123 said:
I agree with all your points.. Wait till Mike, Ben, and Dunc here this! :oHow have I been labelled with them? I carry a Supertool more than anything. (ATM)
-
You have been labeled with them because you were one of the main defenders with Ryan's SURGE review! :D
-
@Leatherman123 said:
You have been labeled with them because you were one of the main defenders with Ryan's SURGE review! :DYeah well, I don't want to go back into that, but the Surge is pants. :D
-
@Benner said:
One thing I will say though is that the Swisstool grew on me the longer I had it. It took me a while to appreciate it for what it is.That's a fair point. I hinted at the fact that I have found my "perfect" tool - the LM Charge. It's impossible for me to evaluate any other tool without making comparison to that - whoever made it!
I have to ask though, do you not find the blade lock release buttons are in an awkward place? Again, I immediately compare to the Charge or Core, where they are situated on the back of the tool, so you can use your thumb joint and close the blade whilst keeping your finger out of harm's way. Haven't mastered that on the Vic yet.....
-
You have been labeled with them because you were one of the main defenders with Ryan's SURGE review! :D
Yeah well, I don't want to go back into that, but the Surge is pants. :D
Hey - I personally wouldn't rate the Surge much better than the Swisstool. You'll notice that I compared to the Core - that's for a reason!
-
One thing I will say though is that the Swisstool grew on me the longer I had it. It took me a while to appreciate it for what it is.
That's a fair point. I hinted at the fact that I have found my "perfect" tool - the LM Charge. It's impossible for me to evaluate any other tool without making comparison to that - whoever made it!
I have to ask though, do you not find the blade lock release buttons are in an awkward place? Again, I immediately compare to the Charge or Core, where they are situated on the back of the tool, so you can use your thumb joint and close the blade whilst keeping your finger out of harm's way. Haven't mastered that on the Vic yet.....
No not at all. IMO, the locks are solid and very reliable. They are very easy to release yet there is no risk of accidently releasing the lock when in use. They can be released by those left or right handed and they don't dig into your hands when you are using the tool. Those all all points which matter to me and the Swisstool excells in every one. One handed lock release/ blade closure is not really important to me in a MT. I just want a safe lock.
-
I'm just trying now, and maybe when some of the new stiffness has worn off I can do better with the locks. I had been operating both buttons at the same time (if you see what I mean) but have just discovered that you only need to do one. Bit stiff still at the moment, but could be doable.....
How do you find getting the tools out? E.g. the phillips?
-
Another question. Do the tools "loosen up" with use, or are they going to continue to irritate me?
-
I cut my nails regularly, and I find getting out all the smaller tools is a PITA! They will continue to irritate you!
-
@DaveK said:
I'm just trying now, and maybe when some of the new stiffness has worn off I can do better with the locks. I had been operating both buttons at the same time (if you see what I mean) but have just discovered that you only need to do one. Bit stiff still at the moment, but could be doable.....How do you find getting the tools out? E.g. the phillips?
The phillips I find very easy as I have girly hands and can fit my little finger in over the top of it to get it out. The 4 outer tools (File, saw, knife and scissors) are pretty easy to get out as well, but I have to admit that the others can be a pain at times to get out especially if you are like us and bite our nails.
-
I just tried using my little finger to get the phillips out and it hurt. Am I a big girl?
-
Ben, what are your thoughts on the LM Core?
-
@Leatherman123 said:
Ben, what are your thoughts on the LM Core?Can't comment really as I have only briefly handled one.
-
What multitool are you going to buy next? The SOG PowerAssist? I have to wait until Christmas to open it, my Fiance is a witch!!!!!!
-
@Leatherman123 said:
What multitool are you going to buy next? The SOG PowerAssist? I have to wait until Christmas to open it, my Fiance is a witch!!!!!!I expect so.
Best start a new thread though as this isn't exactly inkeeping with Dave's Swisstool review.
-
haha, I know!
-
My initial thought were a lot different than yours Dave. ST-X was my very first multi when purchased over 6 years ago, and as I've mentioned in the past I had most makes and models for me to chose from in the store when buying. The selling point for me was the size and the heftiness of the tool when I first pick it up. It just felt solid and almost indestructible, especially compared to the old Wave.
I can see where you are coming from as most of your experience is with Leatherman tools. I got my first LM MT recently from a forum member, a used (but in good condition) new Wave. The Wave was compared to ST in my eyes and didn't do as well as I've expected. I did like the one hand opening knives and outside opening wood and metal saw/file (love the diamond file btw), but the locking system compared to ST seemed inferior to me. Same with pulling the internal tool out on the Wave, the scissors are the worst.
After 6 years the implements are still offering resistance when opening, but if you use you thumb you'll make it easier on you self. I suggest oiling the tool, not to prevent rust (no problems on mine), but to help facilitate smoother opening. All the implements are top notch and suitable for any task you can through at it.
For me if given choice to pick only one MT the Swiss Tool X would be it.
-
@donvito said:
but the locking system compared to ST seemed inferior to me. Same with pulling the internal tool out on the Wave, the scissors are the worst.I agree with the scissors comment, but I'm not sure how the locks are inferior? The locking system on the Wave is the same as the Charge and seems pretty reliable to me. I do think the ST-X is better compared to one of the "big" Leatherman tools though rather than the much smaller Wave. The Core seems a good equivalent IMO.
I think the overall gist of your post is right though, I guess we all compare to what we know and have confidence in, that's natural I guess. After that, I guess you're automatically looking for something that represents an improvement on your benchmark tool.
Anyway, I predict this one will be for sale fairly shortly. I'll persevere with it for a bit though, I do like the "click".....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login