Swisstool X (Plus ?) - Initial thoughts.
-
haha, I know!
-
My initial thought were a lot different than yours Dave. ST-X was my very first multi when purchased over 6 years ago, and as I've mentioned in the past I had most makes and models for me to chose from in the store when buying. The selling point for me was the size and the heftiness of the tool when I first pick it up. It just felt solid and almost indestructible, especially compared to the old Wave.
I can see where you are coming from as most of your experience is with Leatherman tools. I got my first LM MT recently from a forum member, a used (but in good condition) new Wave. The Wave was compared to ST in my eyes and didn't do as well as I've expected. I did like the one hand opening knives and outside opening wood and metal saw/file (love the diamond file btw), but the locking system compared to ST seemed inferior to me. Same with pulling the internal tool out on the Wave, the scissors are the worst.
After 6 years the implements are still offering resistance when opening, but if you use you thumb you'll make it easier on you self. I suggest oiling the tool, not to prevent rust (no problems on mine), but to help facilitate smoother opening. All the implements are top notch and suitable for any task you can through at it.
For me if given choice to pick only one MT the Swiss Tool X would be it.
-
@donvito said:
but the locking system compared to ST seemed inferior to me. Same with pulling the internal tool out on the Wave, the scissors are the worst.I agree with the scissors comment, but I'm not sure how the locks are inferior? The locking system on the Wave is the same as the Charge and seems pretty reliable to me. I do think the ST-X is better compared to one of the "big" Leatherman tools though rather than the much smaller Wave. The Core seems a good equivalent IMO.
I think the overall gist of your post is right though, I guess we all compare to what we know and have confidence in, that's natural I guess. After that, I guess you're automatically looking for something that represents an improvement on your benchmark tool.
Anyway, I predict this one will be for sale fairly shortly. I'll persevere with it for a bit though, I do like the "click".....
-
but the locking system compared to ST seemed inferior to me. Same with pulling the internal tool out on the Wave, the scissors are the worst.
I agree with the scissors comment, but I'm not sure how the locks are inferior? The locking system on the Wave is the same as the Charge and seems pretty reliable to me. I do think the ST-X is better compared to one of the "big" Leatherman tools though rather than the much smaller Wave. The Core seems a good equivalent IMO.
I think the overall gist of your post is right though, I guess we all compare to what we know and have confidence in, that's natural I guess. After that, I guess you're automatically looking for something that represents an improvement on your benchmark tool.
Anyway, I predict this one will be for sale fairly shortly. I'll persevere with it for a bit though, I do like the "click".....
The lock does work and does it's job on the Wave, but it's not the same... Guess it's the lack of a snap when closing the implements (and having to push them in flush), and for me only the can/bottle opener is fairly easy to open it being the only one with a nail nick. The rest of the tools have a tab that's not comfortable to use.
-
There is no play in any of LM tool locks, and there is quite a bit in the SwissTools..
-
Just played with the Wave and noticed something else that I didn't like. The ruler is on the inside of the handles witch is anoying, and for some funny reason they are continuous while lacking an efficient way of alignment of the handles. On ST you have a positive snap when the handles are half way open, creating an almost perfect ruler.
@Leatherman123 said:
There is no play in any of LM tool locks, and there is quite a bit in the SwissTools..There is some play on my Wave (fairly new) and much less in my ST (6 years of use).
-
but the locking system compared to ST seemed inferior to me. Same with pulling the internal tool out on the Wave, the scissors are the worst.
I agree with the scissors comment, but I'm not sure how the locks are inferior? The locking system on the Wave is the same as the Charge and seems pretty reliable to me. I do think the ST-X is better compared to one of the "big" Leatherman tools though rather than the much smaller Wave. The Core seems a good equivalent IMO.
I think the overall gist of your post is right though, I guess we all compare to what we know and have confidence in, that's natural I guess. After that, I guess you're automatically looking for something that represents an improvement on your benchmark tool.
Anyway, I predict this one will be for sale fairly shortly. I'll persevere with it for a bit though, I do like the "click".....
The lock does work and does it's job on the Wave, but it's not the same... Guess it's the lack of a snap when closing the implements (and having to push them in flush), and for me only the can/bottle opener is fairly easy to open it being the only one with a nail nick. The rest of the tools have a tab that's not comfortable to use.
Lol - the can opener's the one I struggle with most and I like the tabs, which maybe sums up our discussions very well!
I feel like I've been really mean to the ST-X, but it's obviously a very good tool. I just don't really regard the "snap" and shininess above the relative ease of use of a Leatherman. I also don't regard those things as evidence of "superior quality", rather just differences.
I'll probably pick up a Spirit if I can get one cheap, as I've compared the ST-X to the Core as it seems a closer match, even though I don't carry a Core as it's too big for me. A Charge v Spirit comparison would be a more worthwhile exercise for me I reckon :)
-
Oh - I have no play in any of my LM locks either! Or my ST-X :D
-
It's up and down play.. What style plier head does your X have, Dave? If it is the newer head, I guarantee it has plier pivot play. I have had at the least 20 current SwissTools and every single one of them had the plier pivot play!
-
@Leatherman123 said:
It's up and down play.. What style plier head does your X have, Dave? If it is the newer head, I guarantee it has plier pivot play. I have had at the least 20 current SwissTools and every single one of them had the plier pivot play!It's the newest plier head I think looking in the wiki - but there's no noticeable play I can see. I'm not knocking the quality of this thing - it's well made. I see the "up and down" play in the main blade though, but that wouldn't bother me too much. It's the getting the damn thing open that's ticking me off!
-
Dave I'd suggest picking up one of the newer Spirits with both scissors and spear point blade, unless you don't care about scissors (a must for me) and want the Spirit S. I just got my Spirit for under $20 BNIB couldn't let a deal like that pass, I do like it but feel the need for a proper blade.
-
At $20 I'd get one now!
The going rate over here seems to be 5x that! I do prefer scissors on a multi, but for the purposes of this exercise, any model would do me.
-
Well it all boils down to preference doesn't it :D It's really just apples and oranges ::)
I red the whole thread just now and have seen some very good points made by everyone

For me I have a STX and I like it well enough, I don't have any problems with the locks but I do close them 2 handed (which makes a world of difference) But I also like the locking system that LM implore on the Charge/Wave series as well. The tools of the STX are superb but they are the hardest tools of any of my MTs to get out :ahhh :D It does seem that they have loosened up a bit but they are still unweildy ::) The pliers of the STX are *well * different I am sure that in some aspects they would be perfect, I still prefer the LM style though ::)
Do I reach for the STX when working........sadly probably not :( I am a LM man and have become accustomed to there tools ;) I would more than likely reach for my trusty Wave or Super Tool :D
Thanks for your view on it Dave
seems I have a very similar view (Glad it wasn't just me :P :D ) But I more than likely will keep it though ;) -
Where to start >:D
Only kidding :D
Great review mate :), and while I don't agree with some of your point's, even I'll admit that the tool's are hardly the easiest thing in the world to get out, however they do get easier with a bit of practice :)
The biggest problem wih the ST is the fact that it's very rare for anyone (except possibly me) to fall in love with them straight away :-, it's definetly one of those tool's that you have to use to really appreciate, as on casual inspection it can seem to fiddly (if superbly built) to be useful in the real world, so if you can, RA permitting, stick with it and see what happens :)
-
Interesting points you bring up there Dave :)
Let me start with the nail biting bit, i bite my nails (not out of nervousness or an inability to stop, but to keep them short) and i have no problem getting any of the implements out, maybe i don't bite mine short enough?! :D The hardest thing i find is remembering where each of the lesser used tools are ::) I can if pushed open just about each blade with one hand, not very quick but possible, and i find it fairly easy to use the lock releases too, can do it one handed but i think that from a safety point of view it is much better to use two hands as then you should never lop a limb off in the process :D
I think a bit more practice (experience) is needed, you've been groomed on Leathermans as you freely admit and yes you have a SAK or two but you don't really have much experience with a ST or Spirit.
You made some good comments though that new buyers will appreciate, not everything about the ST is perfect in everyones eyes :)
-
One more point on the locks, I have never had a ST fail on me, but I have had problems with the liner locks on the Wave. It is because of the Wave that I am now not keen on liner locks at all and will avoid them especially in folders.
-
Poncho / Micky / Roadie:
I've persisted with it today, and it is getting easier with practice to open the tools, so you're spot on with that. It's had a proper work out today too, as I'm stripping a room and refurbishing it as an office, I've dismantled furniture, removed fixings from walls, put up guitar hanging brackets, changed plugs, fixed fuses, and probably other stuff that I've forgotten already :)
She's let me have half an hour for lunch ::) so here's a very quick overview of the Swisstool today so far:
- Awl is superb - the sharpness is perfect for marking pilot holes for subsequent drilling.
- Bit Wrench - how did I ever manage without one of these? Two different allen keys (one in each end - always ready), makes disassembling Ikea furniture a doddle!
- Pliers - needed needle nose pliers a few times today, not yet found a use for the ST-X. Enter Core >:D
- Phillips. Sorry guys, it's pants. After scratching it up a bit on a stubborn screw holding a curtain rail up, and fearing that more force would actually twist it, I got the Core. It came straight out.
It's doing OK, but so far the Core has had to bail it out a couple of times.
I'll update later, but to summarise this morning, I've warmed to it a bit, but it's not a serious contender so far.......
-
@DaveK said:
Poncho / Micky / Roadie:I've persisted with it today, and it is getting easier with practice to open the tools, so you're spot on with that. It's had a proper work out today too, as I'm stripping a room and refurbishing it as an office, I've dismantled furniture, removed fixings from walls, put up guitar hanging brackets, changed plugs, fixed fuses, and probably other stuff that I've forgotten already :)
She's let me have half an hour for lunch ::) so here's a very quick overview of the Swisstool today so far:
**- Awl is superb - the sharpness is perfect for marking pilot holes for subsequent drilling.
- Bit Wrench - how did I ever manage without one of these? Two different allen keys (one in each end - always ready), makes disassembling Ikea furniture a doddle!
- Pliers - needed needle nose pliers a few times today, not yet found a use for the ST-X. Enter Core >:D
- Phillips. Sorry guys, it's pants. After scratching it up a bit on a stubborn screw holding a curtain rail up, and fearing that more force would actually twist it, I got the Core. It came straight out.**
It's doing OK, but so far the Core has had to bail it out a couple of times.
I'll update later, but to summarise this morning, I've warmed to it a bit, but it's not a serious contender so far.......
I agree with all those points. :) The phillips is the main let down with the Swisstool IMO.
-
Suppose I better have my say :D
Locks - I can't believe you don't like them :o I think they are the best on any tool out there . Much better then the Core which I found can be pressed accidently .
Nail Nicks - Your spot on about these and I keep my left thumb nail a little long for this reason . My other 9 nails I bite the hell out of .
Phillips Driver - After using alot of LMs lately I have to agree the phillips is pants :o
Like Mike said it does grow on you . The tools don't get easier to open but you learn over time the best way and it won't be a problem .
Dunc
-
Dunc - It's not the locks themselves that bother me, it's the release mechanism. I am getting on with them better now to be fair, but I still prefer the press motion of the Leatherman tools. This is almost certainly down to familiarity, I simply don't have to think about it with a Leatherman any more, it's like second nature. I've never accidentally released the lock on any Leatherman though.
Something I just remembered also related to the phillips. The "awkward" screw earlier was quite tight to reach, so I tried with the ST-X first, and then the Core with the handles "stretched", i.e. one handle opened, the other closed. One thing I have really become accustomed to with Leatherman tools, is that they are designed to be comfortable in this position, and recognise that the back of the leading handle is a natural place to exert force and generate some decent torque. I still have the dents in my thumb from trying this with the ST! When I eventually gave up and switched to the Core, it was sheer bliss! God bless plastic inserts ;)
As for persevering with it, I could and maybe it would grow on me a bit, but given that the phillips screwdriver is one of my most frequently used tools, I'll probably just make my life easier and use a LM :)
Oh a question! When looking at the outside of the handles in the closed position, there is a backspring that works on the pliers. On both sides it has a funny shaped "hole" which is too precise to be an accident. Any idea what they are for, or indeed why they are not solid?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login