Leatherman SIDEKICK / WINGMAN Owners Club
-
@an0nemus said:
Being my first LM, I must admit the Wingman will hold the most sentimental value. Ironically, because of its price, its also the LM I won't mind much losing or getting stolen, compared to the Charge :DI do not like it all that I misplace any of my tools. Especially a tool that I got a good deal becomes more special as it is likely that deal will never be repeated.
My best deal was a ST300 for under$39, and then the Wingman for $19. And, my WAVE (2004) a gift from my son.
Sent from my iPhone using Tapatalk
-
Being my first LM, I must admit the Wingman will hold the most sentimental value. Ironically, because of its price, its also the LM I won't mind much losing or getting stolen, compared to the Charge :D
I do not like it all that I misplace any of my tools. Especially a tool that I got a good deal becomes more special as it is likely that deal will never be repeated.
My best deal was a ST300 for under$39, and then the Wingman for $19. And, my WAVE (2004) a gift from my son.
Sent from my iPhone using Tapatalk
Wow, those are drool-worthy deals, LoopCutter!
You're correct, each LM is valuable in many ways
-
I picked up a couple of Sidekicks at Home Depot. I paid the princely sum of $7.52 US for each of them.
-
I was in a local "tactical" store here in the Philippines yesterday and saw that it was selling a Wingman for US$89. Wow. It thinks consumers can't check sources online.
-
-
I unfortunately don't have any HD close to me to check


Great deal though :o

-
Don't feel too bad Poncho. I managed to hit 5 home depots today and there was not one Skele or sidekick in any of them.

-
@Alan K. said:
Don't feel too bad Poncho. I managed to hit 5 home depots today and there was not one Skele or sidekick in any of them.
This Home Depot is perfectly located. It has good traffic, but no close neighborhood so discretionary spending is slightly lower leaving LM products on the shelf through a few extra markdowns. I picked up a Kick for $7 a few years back when they discontinued carrying them.
-
I don't have one of these (yet) :) but for the price they sure seem hard to beat. And ... not too terribly big or heavy for EDC.
I do think I'd take a Side kick over the Wingman, I always carry a micra for the scissors if nothing else, (Love those) and I prefer a straight blade. If I could swap out one thing, it would be the package opener from the Wingman for either the file or the smaller serrated blade.I've probably one read a 1/4 of this thread so far but someone mentioned sharpening the package opener, for curiosity how would one do that?
-
I posted this in another thread but thought it belonged here...
There's this maintenance guy I know swears by his Leatherman Wingman. Up til now, I have only ever given one to my youngest nephew, but in considering Christmas gifts, the Wingman surfaced once more (not for that nephew, obviously).
Along comes Lynn LeFey and the post of a nice polished PST for sale, and waxing poetic when comparing that polish to newer tools. So I sat with the Wingman in its bubble and my old PST and PST II adjacent.
It hit me how similar the tool load out of the Wingman is to that of the PST II.
Not the same, but almost. Sure, the file is tiny isn't diamond encrusted and the plyers are spring loaded, but the scissors and combo blade are there, even if they are outside open. Phillips head is there. Maybe not the same number of flatheads, but almost. One is replaced by the package opener, which maybe isn't bad, since so many have ruined blades and small drivers buy opening packages.I don't know why it hasn't hit me before, but is this the PST III? ( Or IV, if you consider the Pulse to be PST III)
-
This is a great place for that type of info
Might help someone make the decision to buy or pass on a Wingman
I love when I get epiphanies like this myself so thanks for sharing yours with us

-
I keep a Wingman clipped to side pouch of my tool grip. Sees Service frequently, with scissors, combo blade, and pliers doing whatever task required. Plus the clip keeps it in place and ready for the next task.
I also, have one at home in the package, ready to be a gift anytime to a friend or family member.
The Saw on the Sidekick makes it as useful for off-road adventures.
Sent from my iPhone using Tapatalk
-
Of all the budget LMs the Wingman is my favorite by a mile and IMO the only one worth getting if you're not ready to step up and get a *real *LM
But to me this is as real as you could ask.
he uses it provides (OHO Blade and a very nice set of scissors) put to shame other similar priced tools
The drivers are the two basics, 90% of the needs you might have regarding screws will be done by these 2. The flathead is a nice prybar, and the package opener is a much appropriate tool for today's urban chores, something rarely seen on other MTs.

The clip is top notch, a standing point in its design, and the 50/50 edge does also the two kind of cutting 90% of the people face, a finer type of slicing (food, paper, envelopes) and an aggressive, destructive cutting (rope, cardboard, plastics, thin steel) all in one.
The file is quite pitiful but provides a decent grit and surface, nowadays most folks only file their nails and proper work is let to proper specific files and tools
if I had to gift a tool to a non-tool person (AKA Joe Smith guy) and wasn't sure what could he use, how much to spend of what would it be of it, this one would be. He'd get the basics, easy steel to learn on, decent durability and awesome warranty to back it up

-
Your review is excellent and I agree with so much of it. The fact that Wingman fits perfectly in the watch-pocket of my jeans with the clip means I always carry it. Since I always carry it, I always use it. Since I always use it I have come to depend on it for first usage and as you stated most of the times it's all that's needed. If Leatherman improved a few things, it would be even better. Sometimes when cutting things with the pliers I find myself having to do the Wingman wiggle, if that doesn't work I get the ST300 or Rebar out. The scissors on mines have improved if that makes sense and cuts many things, but they could be improved to be more like Leatherman's other excellent scissors. I would ditch the can opener and see if they could do a package opener/wire stripper combo. I wonder how 4 outside tools would affect the pocket ability of the tool. It's made me appreciate combo blades where before I didn't like them. I also like spring pliers, I sometimes do repetitive tasks with the pliers and that helps prevent fatigue and make the task go faster.
My favorite Leatherman design is the Surge but I rarely carry it. I tried a Wave and it felt like a compromised Surge, maybe that is because of the order I familiarized myself with them. The Wave is also not as easy to carry even with the Wave pocket clip, so I loaned it(will probably never get it back) to my cousin and he likes it.
-
My very first genuine Leatherman was a PST II, so I am used to the combo blade. I like it, actually, more than any plain edge alone. So if I have a Rebar or ST, then fine. But if I can have only one blade, then for overall effectiveness I want a combo.
That PST II also had scissors. My first genuine SAK was a Super Tinker which also had scissors, so I like having those as well.
Both are available "above the fold" on the Wingman
(Though I do much prefer a saw when away from work or home such as off road, hiking, camping)
Sad to say, but now I have a hankering for a Wingman. You guys are terrible, man.
-
@ThundahBeagle said:
I posted this in another thread but thought it belonged here...There's this maintenance guy I know swears by his Leatherman Wingman. Up til now, I have only ever given one to my youngest nephew, but in considering Christmas gifts, the Wingman surfaced once more (not for that nephew, obviously).
Along comes Lynn LeFey and the post of a nice polished PST for sale, and waxing poetic when comparing that polish to newer tools. So I sat with the Wingman in its bubble and my old PST and PST II adjacent.
It hit me how similar the tool load out of the Wingman is to that of the PST II.
Not the same, but almost. Sure, the file is tiny isn't diamond encrusted and the plyers are spring loaded, but the scissors and combo blade are there, even if they are outside open. Phillips head is there. Maybe not the same number of flatheads, but almost. One is replaced by the package opener, which maybe isn't bad, since so many have ruined blades and small drivers buy opening packages.I don't know why it hasn't hit me before, but is this the PST III? ( Or IV, if you consider the Pulse to be PST III)
It's a good point and I'd not quite seen it like that before. For me though it lacks the ultra slim profile that the PST has that makes it so pocketable.
-
I posted this in another thread but thought it belonged here...
There's this maintenance guy I know swears by his Leatherman Wingman. Up til now, I have only ever given one to my youngest nephew, but in considering Christmas gifts, the Wingman surfaced once more (not for that nephew, obviously).
Along comes Lynn LeFey and the post of a nice polished PST for sale, and waxing poetic when comparing that polish to newer tools. So I sat with the Wingman in its bubble and my old PST and PST II adjacent.
It hit me how similar the tool load out of the Wingman is to that of the PST II.
Not the same, but almost. Sure, the file is tiny isn't diamond encrusted and the plyers are spring loaded, but the scissors and combo blade are there, even if they are outside open. Phillips head is there. Maybe not the same number of flatheads, but almost. One is replaced by the package opener, which maybe isn't bad, since so many have ruined blades and small drivers buy opening packages.I don't know why it hasn't hit me before, but is this the PST III? ( Or IV, if you consider the Pulse to be PST III)
It's a good point and I'd not quite seen it like that before. For me though it lacks the ultra slim profile that the PST has that makes it so pocketable.
And you can't whip it open like the PST
-
Eversince I sold my Charge, Ive been carrying my Wingman until my Rebar arrives. I like the fact that the Wingman's finish is as smooth as SwissTools, and its pliers have springs, but I really don't have the full confidence in it because of its "looseness" compared to how tight the other LMs are (Rebar and up). I feel that its good for light to light-medium duty, though

-
Gareth and SteveC,
Both true, though I mean it more or less in tool load out.
Not much in that size range is as pocketable as the PST. Perfectly functional with no frills. No locks to hook up on your pocket edge. No rolled edges that make it fatter than need be. Smoothd surfaces with only nail nicks, no slots or rivets for springs...
Still love the Rebar, though. Even with all of those modern features, it is still definitively old school in its marriage of new features with old simplicity
An0nemus, If you think the Wingman' s finish is smooth, the Rebar will captivate you
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login