Leatherman SIDEKICK / WINGMAN Owners Club
-
@LoopCutter--
Yup, I'm here in the Philippines. That unused Texas Surge sold for PHP 7,000 or US$140, at the current exchange rate. A brand new, full retail, full warranty Surge here costs PHP 7,900.
There is a brand new Black Oxide Surge that costs US$130 with black leather sheath, but it has no official warranty. But I don't like black as I prefer shiny tools to look at :)
-
@an0nemus said:
Looks like rust to me, jlomein. But wait for the experts opinion here.Thank you for your input. :)
I suspect it is a thin oil coating applied to non US shipped products.
The Wingman is made of stainless steel, a very rust resistant metal.
Just remember your LM has a 25 year warranty.
You could be right, I do remember my Glock coming with a reddish copper like lubricant under the slide. Thanks for the reply.
I guess I can open it now to verify. Initially I was concerned it could have been a fake that Walmart accepted as a return and put back in stock.
I could really use the Wingman's clamshell plastic opener on this indestructible packaging...I'll need to find a used Wingman to open this one! :D
-
I'm weak, i know. I finally bought one wingman.
I know i will be disappointed compared to my wave, surge st300, cs4 etc, but you know, it's MTO!
I think you might be surprised. The spung pliers are really nice. Over all the tool is pretty nice as well. Congrats.
Indeed, it's quite correct. The file is totally worthless, but the rest is descent.
I'm a bit disappointed by the scissor, they aren't one hand opening on my wingman.
And sadly a wave blade can't go in.
-
Yohoo! I just bought an unused Charge TTI with bits, nylon pouch, pocket clip and lanyard ring for $100! The seller actually posted a $90 price for his unused TTI but I offered $10 more just to get it. Now my Wingman is going to my son 😁


My wife even congratulated me for my excellent find 😁
-
Congratulations, that is an excellent deal.
Sent from my iPhone using Tapatalk
-
@LoopCutter said:
Congratulations, that is an excellent deal.Sent from my iPhone using Tapatalk
Thanks, LoopCutter! Been carrying the Charge since I bought it this morning. I must admit I like the Wingman's weight and slimness better, though. It prints less conspicuously when carried vertically :)
-
Great deal on the Charge :o You will like it overall better than the Wingman because it is very similarly sized but many more functions
Oh and those nice Ti scales

-
@Poncho65 said:
Great deal on the Charge :o You will like it overall better than the Wingman because it is very similarly sized but many more functions
Oh and those nice Ti scales

Thanks, Poncho65! And I extremely enjoyed reading your definitive posts about the Charge in another thread.
Being my first LM, I must admit the Wingman will hold the most sentimental value. Ironically, because of its price, its also the LM I won't mind much losing or getting stolen, compared to the Charge :D
-
@an0nemus said:
Being my first LM, I must admit the Wingman will hold the most sentimental value. Ironically, because of its price, its also the LM I won't mind much losing or getting stolen, compared to the Charge :DI do not like it all that I misplace any of my tools. Especially a tool that I got a good deal becomes more special as it is likely that deal will never be repeated.
My best deal was a ST300 for under$39, and then the Wingman for $19. And, my WAVE (2004) a gift from my son.
Sent from my iPhone using Tapatalk
-
Being my first LM, I must admit the Wingman will hold the most sentimental value. Ironically, because of its price, its also the LM I won't mind much losing or getting stolen, compared to the Charge :D
I do not like it all that I misplace any of my tools. Especially a tool that I got a good deal becomes more special as it is likely that deal will never be repeated.
My best deal was a ST300 for under$39, and then the Wingman for $19. And, my WAVE (2004) a gift from my son.
Sent from my iPhone using Tapatalk
Wow, those are drool-worthy deals, LoopCutter!
You're correct, each LM is valuable in many ways
-
I picked up a couple of Sidekicks at Home Depot. I paid the princely sum of $7.52 US for each of them.
-
I was in a local "tactical" store here in the Philippines yesterday and saw that it was selling a Wingman for US$89. Wow. It thinks consumers can't check sources online.
-
-
I unfortunately don't have any HD close to me to check


Great deal though :o

-
Don't feel too bad Poncho. I managed to hit 5 home depots today and there was not one Skele or sidekick in any of them.

-
@Alan K. said:
Don't feel too bad Poncho. I managed to hit 5 home depots today and there was not one Skele or sidekick in any of them.
This Home Depot is perfectly located. It has good traffic, but no close neighborhood so discretionary spending is slightly lower leaving LM products on the shelf through a few extra markdowns. I picked up a Kick for $7 a few years back when they discontinued carrying them.
-
I don't have one of these (yet) :) but for the price they sure seem hard to beat. And ... not too terribly big or heavy for EDC.
I do think I'd take a Side kick over the Wingman, I always carry a micra for the scissors if nothing else, (Love those) and I prefer a straight blade. If I could swap out one thing, it would be the package opener from the Wingman for either the file or the smaller serrated blade.I've probably one read a 1/4 of this thread so far but someone mentioned sharpening the package opener, for curiosity how would one do that?
-
I posted this in another thread but thought it belonged here...
There's this maintenance guy I know swears by his Leatherman Wingman. Up til now, I have only ever given one to my youngest nephew, but in considering Christmas gifts, the Wingman surfaced once more (not for that nephew, obviously).
Along comes Lynn LeFey and the post of a nice polished PST for sale, and waxing poetic when comparing that polish to newer tools. So I sat with the Wingman in its bubble and my old PST and PST II adjacent.
It hit me how similar the tool load out of the Wingman is to that of the PST II.
Not the same, but almost. Sure, the file is tiny isn't diamond encrusted and the plyers are spring loaded, but the scissors and combo blade are there, even if they are outside open. Phillips head is there. Maybe not the same number of flatheads, but almost. One is replaced by the package opener, which maybe isn't bad, since so many have ruined blades and small drivers buy opening packages.I don't know why it hasn't hit me before, but is this the PST III? ( Or IV, if you consider the Pulse to be PST III)
-
This is a great place for that type of info
Might help someone make the decision to buy or pass on a Wingman
I love when I get epiphanies like this myself so thanks for sharing yours with us

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login