Victorinox Tang Stamps
-
could you explain the scale calendar and how it works? I have noticed there was one inside, but was unsure of how to use it to extract data (did not want my ignorance leading to a bad assumption)
Don’t you know? I am not a speSmurfpillst in that, moreover English is not my native language, but I can try.
When Victorinox factory molds plastic scales of the pressured hot plastic, they insert special tabs into a matrix. These tabs can show the year of the scale molding, number of the matrix etc. Some people call first of them “calendar”.
It can be number of the year, special circus of numbers/symbols etc. (see picture below). Pay attention that it is only the year of the scale production, not the year when the knife was born. Sometimes i did not find any calendars on scales.
We have to remove both scales to see both years on internal side of it. I know, it is a bit invasive method. Sometimes we can see the calendar through transparent plastic using a magnification glass and a flashlight.

-
There is another comparing old and new crossbow tang stamps. As you can see, the older stamp's crossbow is touching the cross and letter "C" in "OFFICIER".

-
Continuing this investigation, I have found that this changing TypeA->TypeB of the tang back side might be happened in 1992 or a bit later.
Below there is a photo of the knife, which has a screw on the scissors, a hook. Before I have seen dozens photos of knifes which had the TypeA crossbow, a screw on the scissors and a hook. And only this rare knife has TypeB tang. It means, that it was produced between 1991-1992 or in early 1993.
I took photos over there: https://www.facebook.com/groups/SAKCollectors/permalink/659399997518138/ and thanks Ken Galliher for them. -
Hello again to everybody. Considering total number of new posts here, idea of knife dating is not very popular.
Anyway, I have found dates of main blades production for 91mm SAKs with "ECONOMY" stamped on it - it is1976-1980. The proof is over there http://www.sakhome.com/304372180, thanks for TROND. That page is quite old, but anyway there is no other sources about this. -
OK Frater Martin
Clearly you do not understand this site very well and at 28 posts this is totally comprehendable
Dating SAKS is a total obesession for many members of this site - particulary in the SAK Knights board
For instance look here - or check any number of posts discussing SAK dating - and any posts where Jazzbass has contributed.Yes your link is interesting to a pretty nice blog - and I look forward to exploring that site some more
But please do no make judgements on this community from a position of ignorance of this site and its members.
If you want to promote your blog just decalre that and do not judge us!!
-
- no replies does not mean nobody is reading...
-
I use sakhome quite a bit, it's a great site. I really appreciate the time and effort it took to gather and publish that information. Of course we all use sakwiki and the many other links (including sakhome, that's how I found it). I personally have spent a considerable amount of time and effort in placing dates on SAKs. There are a few dating features out there that is seems no one has quite been able to narrow down on any site I've seen. For example, I have not found accurate dates for:
5-turn to 4-turn corkscrew
Single to Double leaf scissor spring on 74 & 84mm
Dating features on 74mm in general
Dating the "passenger" / Alpineer
More thorough general information about alox/waffenkontrollI do think wealth of information here at MTO on the SAK and Collectors forum is the most comprehensive I've found... but you have to dig in and search for it. We should all realize that we've already alienated ourselves from normal society and work together on the effort. We can spread the the love and knowledge and still remember our manners.
:D 
-
I don't have the mother load or anything but I'm going to do my best to post pics of each variation I have soon.

-
@Frater_Martin said:
........
I have found at least two different types of the crossbow on the back side of main blade.
Type A, older: the crossbow and the cross are touching each other and the cross is a bit larger than next one;
Type B, newer: there is little space between the crossbow and the cross.
I had been using comparative analysis of internet photos and found out, that change of the stamp happened between 1992-1996.
........Some of these tang stamp changes are so subtle - I am staggered that you guys even spot them :o
This one with the cross touching or not touching is amazing.
It's like in the 2000s when they changed from V S S R to V SM S. But then the V size also changed a little later and there were also differences in the Swiss Made size/letter spacing.
There is a good thread on that with some photos by JazzBass.
And I still don't know how Ulli fits the dates to the stampsThe other one that I find quite hard to understand and see is the change from a tapered awl to the bevelled awl (or v.v) that happened a year or so after the awl got its eye.
And the scales date stamps thing is very useful - I am going to look at that some more - But as you say it's very invasive. I try and avoid taking the scales off if I can, as it can damage the bushing clips.
Thanks for the info anyway. Much appreciated
For me and my collection I am sticking with the major tool evolution changes

Hey El CS
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
Have you seen this? Any good?
And for the five turn to four turn CS switch is the SAAMS (link) date not correct?
Yes agree with you there is much less info available on the non-91mm sizes for dating
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
-
.
........
I have found at least two different types of the crossbow on the back side of main blade.
Type A, older: the crossbow and the cross are touching each other and the cross is a bit larger than next one;
Type B, newer: there is little space between the crossbow and the cross.
I had been using comparative analysis of internet photos and found out, that change of the stamp happened between 1992-1996.
........Some of these tang stamp changes are so subtle - I am staggered that you guys even spot them :o
This one with the cross touching or not touching is amazing.
It's like in the 2000s when they changed from V S S R to V SM S. But then the V size also changed a little later and there were also differences in the Swiss Made size/letter spacing.
There is a good thread on that with some photos by JazzBass.
And I still don't know how Ulli fits the dates to the stampsThe other one that I find quite hard to understand and see is the change from a tapered awl to the bevelled awl (or v.v) that happened a year or so after the awl got its eye.
And the scales date stamps thing is very useful - I am going to look at that some more - But as you say it's very invasive. I try and avoid taking the scales off if I can, as it can damage the bushing clips.
Thanks for the info anyway. Much appreciated
For me and my collection I am sticking with the major tool evolution changes

Hey ES
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 page in the Wiki.
Have you seen this? Any good?
And for the five turn to four turn CS switch is the SAAMS date not correct?
Yes agree with you there is much less info available on the non-91mm sizes for dating
I'm fairly confident that date is about 10 years off. I think it's closer to the date on the clip point blade. I've never seen a 5 turn On a knife with a spearpoint small blade
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 page in the Wiki.
-
Ah That's an interesting theory. I always thought SAAMS was the SAK 'bible'
I only have two recentish five turners and they are both clip pointers - So supports you theory - I need to check the other tools
We need JazzBass!! Are you there mate?
-
I also think the combo tool was introduced some time between 80-82, not 86

I think the bevel on the tip of the awl was stopped by 80 as well.
I believe I can place some ballpark dates on the phillips as well: First is SAAM's dates, then mine (mine only has one confused face) :D
-
(1952-????) square, file, no can-key
-
(????-????) square, no file, no can-key
-
(????-????) square, no file, can-key
-
(1992?-????) round, can-key
-
(????-now) round, no can-key
-
(1952 - 1968) square, file, no can-key
-
Never seen it???? (square, no file, no can-key
-
(1968 -1980) square, no file, can-key
-
(1980 - 1992) round, can key
-
1992 - present round no can key
-
-
.
For me and my collection I am sticking with the major tool evolution changes

Hey El CS
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
Have you seen this? Any good?
And for the five turn to four turn CS switch is the SAAMS (link) date not correct?
Yes agree with you there is much less info available on the non-91mm sizes for dating
The article on the 61 soldiers is good.
Thanks for pointing that out 
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
-
Aha - Interesting again Mr El CS
I will have to update my SAK dating table
I got very excited by your item 3.
I collect the tool variations (mainly according to SAAMS, and other info learned here) and I thought that this was the one tool, that was missing from my collection!
If it does not exist at all then my collection is complete - :ahhh Woo hoo !!But I went to check ....... and I do have the square Ph with can-key and no file. It's on an old 84mm Hoffritz Tinker.
The one I do not have is the square Ph with no can-key and no file ???
So if you have one for trade/purchase I would be very happy to have a chat :DWe need some of the old timers like ICanFixThat / JB / Stressmaster to chip in on this etc
PS. Ulli - Sorry to hijack your thread - However it's all dating info - So I hope that is OK

PPS. Thanks for the comment on the 61 Soldier page - I did some major restructuring/rework on that a while ago -
@Huntsman said:
Aha - Interesting again Mr El CSBut I went to check ....... and I do have the square Ph with can-key and no file. It's on an old 84mm Hoffritz Tinker.
It's the square no file no can key that I have not run into... have you? I'm pretty sure that can key stayed in there on all the Phillips from 68-92
I might have been fixing a typo when you first glanced
-
Yep - The 'never seen it' moved from 3 to 2 !! - So we are in agreement !!
It's number 2 that I have never seen either.
Although my collection is not that extensive compared to many - And I don't trawl eBay so much either these days!!
So if anyone has the square Ph with no can-key and no file - Let us know!!
-

Got to keep it alive.
-
This is the thread that lead me to becoming a Knight

-
@Huntsman said:
Definitely - Dating SAKs is as much an art as a science!!
Our info says the awl got it's eye and the SD its half stop in 85, and the V got big in 86Particularly for changes that happened in consecutive years - we see SAKs that break the rules!
I think its all down to the parts bin!! ie Old style parts being used after they are 'retired'.I know that our dates are "circa" and forgive me if this has been discussed, but may I politely submit that we should move the dates for the half stop and the sewing eye FIRMLY in the year 1984 at least. Here's why I think so... Have we seen any of those two changes in known 1983 models? I don't know the answer to that but I have a Vic Explorer, older style burgundy box with white slide out cardboard tray and paperwork. The tray is inked "Explorer " and embossed "84". The knife tang has Victorinox (normal size V), Swizerland, stainless, rostfrei. Back tang marked officier suisse, with the bow and cross. Cross touches bow, bow touches C, cross does not touch Letter i. The mag glass is framed in grey plastic with a slight bevel. The snap ring holder is on a shim at the corkscrew layer, the scissors held by a screw. This knife has a grooved, 4 twist corkscrew, and more importantly, it has a half-stop bottle opener and a sewing eye in the awl. Is that aspositively dated to 1984 as anything we have seen, seeing as the box in which in came was marked from the factory? We have been saying '85 for both of those changes, but I have BOTH of those implementations on this clearly marked 1984 Explorer.
Any thoughts or contradictions? I try to read all of these dating posts but it's hard to keep up.
-
By the way, the box is marked 84, but there is a hand written note inside "from Uncle Barney Wallis 6-27-87 for High School graduation"
If the knife was made in 1984, and it was given as a gift in 1987, then we have some idea of production, shipping, and shelf time - at least during that era.
So, when I bought my Super Tinker about 1988, it could have been on the shelf for three years prior and have 1985 features.
But this Explorer is marked 1984 from Victorinox itself. Should that be the best we have to go by?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login