Victorinox Tang Stamps
-
@Frater_Martin said:
........
I have found at least two different types of the crossbow on the back side of main blade.
Type A, older: the crossbow and the cross are touching each other and the cross is a bit larger than next one;
Type B, newer: there is little space between the crossbow and the cross.
I had been using comparative analysis of internet photos and found out, that change of the stamp happened between 1992-1996.
........Some of these tang stamp changes are so subtle - I am staggered that you guys even spot them :o
This one with the cross touching or not touching is amazing.
It's like in the 2000s when they changed from V S S R to V SM S. But then the V size also changed a little later and there were also differences in the Swiss Made size/letter spacing.
There is a good thread on that with some photos by JazzBass.
And I still don't know how Ulli fits the dates to the stampsThe other one that I find quite hard to understand and see is the change from a tapered awl to the bevelled awl (or v.v) that happened a year or so after the awl got its eye.
And the scales date stamps thing is very useful - I am going to look at that some more - But as you say it's very invasive. I try and avoid taking the scales off if I can, as it can damage the bushing clips.
Thanks for the info anyway. Much appreciated
For me and my collection I am sticking with the major tool evolution changes

Hey El CS
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
Have you seen this? Any good?
And for the five turn to four turn CS switch is the SAAMS (link) date not correct?
Yes agree with you there is much less info available on the non-91mm sizes for dating
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
-
.
........
I have found at least two different types of the crossbow on the back side of main blade.
Type A, older: the crossbow and the cross are touching each other and the cross is a bit larger than next one;
Type B, newer: there is little space between the crossbow and the cross.
I had been using comparative analysis of internet photos and found out, that change of the stamp happened between 1992-1996.
........Some of these tang stamp changes are so subtle - I am staggered that you guys even spot them :o
This one with the cross touching or not touching is amazing.
It's like in the 2000s when they changed from V S S R to V SM S. But then the V size also changed a little later and there were also differences in the Swiss Made size/letter spacing.
There is a good thread on that with some photos by JazzBass.
And I still don't know how Ulli fits the dates to the stampsThe other one that I find quite hard to understand and see is the change from a tapered awl to the bevelled awl (or v.v) that happened a year or so after the awl got its eye.
And the scales date stamps thing is very useful - I am going to look at that some more - But as you say it's very invasive. I try and avoid taking the scales off if I can, as it can damage the bushing clips.
Thanks for the info anyway. Much appreciated
For me and my collection I am sticking with the major tool evolution changes

Hey ES
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 page in the Wiki.
Have you seen this? Any good?
And for the five turn to four turn CS switch is the SAAMS date not correct?
Yes agree with you there is much less info available on the non-91mm sizes for dating
I'm fairly confident that date is about 10 years off. I think it's closer to the date on the clip point blade. I've never seen a 5 turn On a knife with a spearpoint small blade
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 page in the Wiki.
-
Ah That's an interesting theory. I always thought SAAMS was the SAK 'bible'
I only have two recentish five turners and they are both clip pointers - So supports you theory - I need to check the other tools
We need JazzBass!! Are you there mate?
-
I also think the combo tool was introduced some time between 80-82, not 86

I think the bevel on the tip of the awl was stopped by 80 as well.
I believe I can place some ballpark dates on the phillips as well: First is SAAM's dates, then mine (mine only has one confused face) :D
-
(1952-????) square, file, no can-key
-
(????-????) square, no file, no can-key
-
(????-????) square, no file, can-key
-
(1992?-????) round, can-key
-
(????-now) round, no can-key
-
(1952 - 1968) square, file, no can-key
-
Never seen it???? (square, no file, no can-key
-
(1968 -1980) square, no file, can-key
-
(1980 - 1992) round, can key
-
1992 - present round no can key
-
-
.
For me and my collection I am sticking with the major tool evolution changes

Hey El CS
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
Have you seen this? Any good?
And for the five turn to four turn CS switch is the SAAMS (link) date not correct?
Yes agree with you there is much less info available on the non-91mm sizes for dating
The article on the 61 soldiers is good.
Thanks for pointing that out 
- There is some info on the WC stamps in SOSAK/SAKnights - There is a link at the bottom of the Soldier 61 (link) page in the Wiki.
-
Aha - Interesting again Mr El CS
I will have to update my SAK dating table
I got very excited by your item 3.
I collect the tool variations (mainly according to SAAMS, and other info learned here) and I thought that this was the one tool, that was missing from my collection!
If it does not exist at all then my collection is complete - :ahhh Woo hoo !!But I went to check ....... and I do have the square Ph with can-key and no file. It's on an old 84mm Hoffritz Tinker.
The one I do not have is the square Ph with no can-key and no file ???
So if you have one for trade/purchase I would be very happy to have a chat :DWe need some of the old timers like ICanFixThat / JB / Stressmaster to chip in on this etc
PS. Ulli - Sorry to hijack your thread - However it's all dating info - So I hope that is OK

PPS. Thanks for the comment on the 61 Soldier page - I did some major restructuring/rework on that a while ago -
@Huntsman said:
Aha - Interesting again Mr El CSBut I went to check ....... and I do have the square Ph with can-key and no file. It's on an old 84mm Hoffritz Tinker.
It's the square no file no can key that I have not run into... have you? I'm pretty sure that can key stayed in there on all the Phillips from 68-92
I might have been fixing a typo when you first glanced
-
Yep - The 'never seen it' moved from 3 to 2 !! - So we are in agreement !!
It's number 2 that I have never seen either.
Although my collection is not that extensive compared to many - And I don't trawl eBay so much either these days!!
So if anyone has the square Ph with no can-key and no file - Let us know!!
-

Got to keep it alive.
-
This is the thread that lead me to becoming a Knight

-
@Huntsman said:
Definitely - Dating SAKs is as much an art as a science!!
Our info says the awl got it's eye and the SD its half stop in 85, and the V got big in 86Particularly for changes that happened in consecutive years - we see SAKs that break the rules!
I think its all down to the parts bin!! ie Old style parts being used after they are 'retired'.I know that our dates are "circa" and forgive me if this has been discussed, but may I politely submit that we should move the dates for the half stop and the sewing eye FIRMLY in the year 1984 at least. Here's why I think so... Have we seen any of those two changes in known 1983 models? I don't know the answer to that but I have a Vic Explorer, older style burgundy box with white slide out cardboard tray and paperwork. The tray is inked "Explorer " and embossed "84". The knife tang has Victorinox (normal size V), Swizerland, stainless, rostfrei. Back tang marked officier suisse, with the bow and cross. Cross touches bow, bow touches C, cross does not touch Letter i. The mag glass is framed in grey plastic with a slight bevel. The snap ring holder is on a shim at the corkscrew layer, the scissors held by a screw. This knife has a grooved, 4 twist corkscrew, and more importantly, it has a half-stop bottle opener and a sewing eye in the awl. Is that aspositively dated to 1984 as anything we have seen, seeing as the box in which in came was marked from the factory? We have been saying '85 for both of those changes, but I have BOTH of those implementations on this clearly marked 1984 Explorer.
Any thoughts or contradictions? I try to read all of these dating posts but it's hard to keep up.
-
By the way, the box is marked 84, but there is a hand written note inside "from Uncle Barney Wallis 6-27-87 for High School graduation"
If the knife was made in 1984, and it was given as a gift in 1987, then we have some idea of production, shipping, and shelf time - at least during that era.
So, when I bought my Super Tinker about 1988, it could have been on the shelf for three years prior and have 1985 features.
But this Explorer is marked 1984 from Victorinox itself. Should that be the best we have to go by?
-
Hi, ThundahBeagle.
Could you make a detail photo to illustrate your post? It seems to be interesting. -
@Frater_Martin said:
Hi, ThundahBeagle.
Could you make a detail photo to illustrate your post? It seems to be interesting.Happy to, Frater. At the moment I am at work, however I hope to do that when I have returned.
-
Some pics of the '84 Explorer...

-
...

-
...

-
...

-
...

-
...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login