Show off your Sak mod's!
-
This has been a work in progress for about a year and a half. I just started working on it again today. Need to fine tune some things before final peening, but I'm done for today and got excited, so I decided to take a picture.

Sent from my iPhone using Tapatalk
-
Alumnus mod. The scissors were harvested from a golfer and weren't in great shape, but I got them perfectly functional and sharp.




Sent from my iPhone using Tapatalk
-
Anyone remember seen a Minichamp mod with just 8 same blades? I know I've seen one and I remember laughing my ass off at it...
Just looking for it, 'cause I just saw Syph's Super Fisherman a while ago and couple of those "Sixpack" models :D
I swear if I was a modder, I'd just spend all my time making those goofy crazy ones

Probably it's the reason I'm not...

-
This is my mini 84mm Soldier with plus scales...
First video is modding Recruit to Soldier (small blade to reamer)
https://youtu.be/483e2njVRegSecond video is adding rope cutter function to the can oppener
https://youtu.be/Mwgugt-PHsEI plan adding hex bit driver in future video... :D
-
@Aleph78 said:
Anyone remember seen a Minichamp mod with just 8 same blades? I know I've seen one and I remember laughing my ass off at it...Just looking for it, 'cause I just saw Syph's Super Fisherman a while ago and couple of those "Sixpack" models :D
I swear if I was a modder, I'd just spend all my time making those goofy crazy ones

Probably it's the reason I'm not...

If I could find a whole bunch of fishermen cheap, I might make me a super fisherman.

With the leftovers, a six pack and a SAK with lots of pointy bits!! :D -
Great mods as usual TimGanev
Looking forward to the hex driver :ahhh -
Revisited the Whittling SAK Mod I did sometime aho... Took out the metal file (don't know why I put it in the first place) and basically turned it into a Camper...

Reprofiled and gave the small blade a somewhat taper point... Supposedly good for carving tight turns...

Also gave the cap lifter tip a chisel grind...

May grind the keyring holder off if it gets in the way of carving... Will decide on this once I try it out...
Originally made this build to give whittling a try... just couldn't find the time... might try it soon though...
Sent from my iPhone using Tapatalk
-
That's a nice mod J-Man

I have one similar, but it's a Recruit so no back tools = comfortable for extended whittling. The chisel tip is really useful, and I did the same to the small driver on the can opener.
I'll get some pics up if I get time.

-
Thanks Mags... Am still figuring out if I need to do anything to the can opener... guess some whittling time will tell me...

Sent from my iPhone using Tapatalk
-
This isn't much of a mod, but I wanted to try adding a small sewing kit to a 58mm SAK. I thought that it should have room for a needle, some thread, three shirt buttons (one which is for the sleeve placket). Also, I didn't want to give up the T&T.
I have a small 3d printer (Monoprice MP Select Mini) that prints in PLA and ABS. Using a cheap Harbor Freight caliper and TinkerCad online, I came up with a set of new scales for a donor SD that I got for a few dollars. It took a few tries to line up the holes on the scales with the rivets on the knife. Some sandpaper and a little time made up the difference.
It's not a small mod. In fact, it makes the SD really large, but it makes for steadier tool use. As this is the first iteration of the design, I'm still working out details. I need a better way to store the thread and needle, but I love how the buttons are stored. It makes me smile. Each of the holes is a pass-through and you can poke the tweezers through to pop out the button.
Ryan

-
@Ryan Adney said:
This isn't much of a mod, but I wanted to try adding a small sewing kit to a 58mm SAK. I thought that it should have room for a needle, some thread, three shirt buttons (one which is for the sleeve placket). Also, I didn't want to give up the T&T.I have a small 3d printer (Monoprice MP Select Mini) that prints in PLA and ABS. Using a cheap Harbor Freight caliper and TinkerCad online, I came up with a set of new scales for a donor SD that I got for a few dollars. It took a few tries to line up the holes on the scales with the rivets on the knife. Some sandpaper and a little time made up the difference.
It's not a small mod. In fact, it makes the SD really large, but it makes for steadier tool use. As this is the first iteration of the design, I'm still working out details. I need a better way to store the thread and needle, but I love how the buttons are stored. It makes me smile. Each of the holes is a pass-through and you can poke the tweezers through to pop out the button.
Ryan
Wow, I threw a Classic in my sewing machine's toolbox since the thread cutter was a bit blunt after about 60 years but you took it to a whole different level, good job!
-
@Ryan Adney said:
This isn't much of a mod, but I wanted to try adding a small sewing kit to a 58mm SAK......Interesting idea Ryan - But I don't quite get it

More pics please - Maybe some close ups
-
Interesting mod guys...

Sent from my iPhone using Tapatalk
-
@Ryan Adney said:
This isn't much of a mod, but I wanted to try adding a small sewing kit to a 58mm SAK......
Interesting idea Ryan - But I don't quite get it

More pics please - Maybe some close ups
I guess those pictures were a little vague. I've attached a few more along with a see-through from TinkerCad.
The T&T scale has both tools much like the T&T insert that have been used on Alox mods. The difference here is that the insert is now a scale. That left room on the other scale for my sewing kit.
The sewing kit scale itself serves as a spool and the needle is nestled in among the turns of thread. Under the thread is storage for three buttons. The buttons can be poked out with the tweezers. The whole lot is held in place by a flat hair tie. Everything else is bog standard Classic SD.
The final attachment is a see-through version. That might make it clearer. This is a pun.
It's not the most useful mod for a vast majority of SAK lovers, but the idea struck me and it was fun to make. I was a little inspired by the Wegner Bernina knives, but I can't find the small one and the large one is too expensive. I had another idea: If you had an office that was iffy on SAKs you could make the case that it's just a sewing kit.

-
Got it now - Thanks - Nice

The key to understanding it was the whole scale being a spool !!
..... And a 'secret' drawer again !! ;)I love these real whacky 'thinking-out-of-the-box' mods
-
Couple of SCALE mods. Three horny dudes and a teak wood Tinker. The Tinker has a carved/textured feel that I really like. Still working on peened rivets. They look so cool but hard to do.



-
I finally got my hands on a Pioneer Harvester, and decided to mod my SAK (I used to call it Electrician X) yet again, to add the wood saw the hawkbill/pruner blade and the can opener (this one was necessary to complete the set).
Previously I started with a Pioneer X and an Electrician. Swapped the can opener of the X with the sheepsfoot blade, and ended up with the Pioneer Electrician X, and a Pioneer.
Then I added a pocket clip to it.Now I had to disassemble all 3, to get all the parts I needed for the final SAK (don't have a name for it yet).
I ended up with the 5 layer SAK I wanted, a single layer SAK, and a few leftover parts.
<u>5 Layer SAK:</u>
-
Layer 1
Main blade / awl -
Layer 2
Wood saw -
Layer 3
Scissors -
Layer 4
Sheepfoots blade / Hawkbill blade -
Layer 5
Can opener / Bottle opener
For the fourth layer, I had to use the spring from a main blade layer and also the awl spacer (since the spring is thicker), to make it work, otherwise I could have built 2 single layer SAK's.
<u>**Single Layer SAK **(still have to peen it - you can see it in the leftovers picture):</u>
- Layer 1
Main blade / awl
<u>Leftovers:</u>
2 openers layer springs
1 spacer
1 set of scales
1 Main blade
1 Awl
2 Bottle openers


.jpg)
.jpg)
-
-
Nice mod and peen job...

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login