Show off your Sak mod's!
-
Thanks Mags... Am still figuring out if I need to do anything to the can opener... guess some whittling time will tell me...

Sent from my iPhone using Tapatalk
-
This isn't much of a mod, but I wanted to try adding a small sewing kit to a 58mm SAK. I thought that it should have room for a needle, some thread, three shirt buttons (one which is for the sleeve placket). Also, I didn't want to give up the T&T.
I have a small 3d printer (Monoprice MP Select Mini) that prints in PLA and ABS. Using a cheap Harbor Freight caliper and TinkerCad online, I came up with a set of new scales for a donor SD that I got for a few dollars. It took a few tries to line up the holes on the scales with the rivets on the knife. Some sandpaper and a little time made up the difference.
It's not a small mod. In fact, it makes the SD really large, but it makes for steadier tool use. As this is the first iteration of the design, I'm still working out details. I need a better way to store the thread and needle, but I love how the buttons are stored. It makes me smile. Each of the holes is a pass-through and you can poke the tweezers through to pop out the button.
Ryan

-
@Ryan Adney said:
This isn't much of a mod, but I wanted to try adding a small sewing kit to a 58mm SAK. I thought that it should have room for a needle, some thread, three shirt buttons (one which is for the sleeve placket). Also, I didn't want to give up the T&T.I have a small 3d printer (Monoprice MP Select Mini) that prints in PLA and ABS. Using a cheap Harbor Freight caliper and TinkerCad online, I came up with a set of new scales for a donor SD that I got for a few dollars. It took a few tries to line up the holes on the scales with the rivets on the knife. Some sandpaper and a little time made up the difference.
It's not a small mod. In fact, it makes the SD really large, but it makes for steadier tool use. As this is the first iteration of the design, I'm still working out details. I need a better way to store the thread and needle, but I love how the buttons are stored. It makes me smile. Each of the holes is a pass-through and you can poke the tweezers through to pop out the button.
Ryan
Wow, I threw a Classic in my sewing machine's toolbox since the thread cutter was a bit blunt after about 60 years but you took it to a whole different level, good job!
-
@Ryan Adney said:
This isn't much of a mod, but I wanted to try adding a small sewing kit to a 58mm SAK......Interesting idea Ryan - But I don't quite get it

More pics please - Maybe some close ups
-
Interesting mod guys...

Sent from my iPhone using Tapatalk
-
@Ryan Adney said:
This isn't much of a mod, but I wanted to try adding a small sewing kit to a 58mm SAK......
Interesting idea Ryan - But I don't quite get it

More pics please - Maybe some close ups
I guess those pictures were a little vague. I've attached a few more along with a see-through from TinkerCad.
The T&T scale has both tools much like the T&T insert that have been used on Alox mods. The difference here is that the insert is now a scale. That left room on the other scale for my sewing kit.
The sewing kit scale itself serves as a spool and the needle is nestled in among the turns of thread. Under the thread is storage for three buttons. The buttons can be poked out with the tweezers. The whole lot is held in place by a flat hair tie. Everything else is bog standard Classic SD.
The final attachment is a see-through version. That might make it clearer. This is a pun.
It's not the most useful mod for a vast majority of SAK lovers, but the idea struck me and it was fun to make. I was a little inspired by the Wegner Bernina knives, but I can't find the small one and the large one is too expensive. I had another idea: If you had an office that was iffy on SAKs you could make the case that it's just a sewing kit.

-
Got it now - Thanks - Nice

The key to understanding it was the whole scale being a spool !!
..... And a 'secret' drawer again !! ;)I love these real whacky 'thinking-out-of-the-box' mods
-
Couple of SCALE mods. Three horny dudes and a teak wood Tinker. The Tinker has a carved/textured feel that I really like. Still working on peened rivets. They look so cool but hard to do.



-
I finally got my hands on a Pioneer Harvester, and decided to mod my SAK (I used to call it Electrician X) yet again, to add the wood saw the hawkbill/pruner blade and the can opener (this one was necessary to complete the set).
Previously I started with a Pioneer X and an Electrician. Swapped the can opener of the X with the sheepsfoot blade, and ended up with the Pioneer Electrician X, and a Pioneer.
Then I added a pocket clip to it.Now I had to disassemble all 3, to get all the parts I needed for the final SAK (don't have a name for it yet).
I ended up with the 5 layer SAK I wanted, a single layer SAK, and a few leftover parts.
<u>5 Layer SAK:</u>
-
Layer 1
Main blade / awl -
Layer 2
Wood saw -
Layer 3
Scissors -
Layer 4
Sheepfoots blade / Hawkbill blade -
Layer 5
Can opener / Bottle opener
For the fourth layer, I had to use the spring from a main blade layer and also the awl spacer (since the spring is thicker), to make it work, otherwise I could have built 2 single layer SAK's.
<u>**Single Layer SAK **(still have to peen it - you can see it in the leftovers picture):</u>
- Layer 1
Main blade / awl
<u>Leftovers:</u>
2 openers layer springs
1 spacer
1 set of scales
1 Main blade
1 Awl
2 Bottle openers


.jpg)
.jpg)
-
-
Nice mod and peen job...

Sent from my iPhone using Tapatalk
-
+1
-
Nice, I bet that ways a pretty weight being a five layer, I'd also think it would be a little too big as a pocket clip knife no? But nice job also on the peen..
JR -
@MadPlumbarian said:
Nice, I bet that ways a pretty weight being a five layer, I'd also think it would be a little too big as a pocket clip knife no? But nice job also on the peen..
JRIt weighs in at 134g / 4.7oz. It's 10g heavier than my Deluxe Tinker (125g / 4.4oz) a 4 layer SAK (although one of them is the pliers layer), but it's still marginally thinner, with 20.51mm / 0.808in vs 22.32mm / 0.879in.
For me it's not that heavy, and it's still manageable as a pocket clip knife (not ideal though :D) -
Nice, I bet that ways a pretty weight being a five layer, I'd also think it would be a little too big as a pocket clip knife no? But nice job also on the peen..
JRIt weighs in at 134g / 4.7oz. It's 10g heavier than my Deluxe Tinker (125g / 4.4oz) a 4 layer SAK (although one of them is the pliers layer), but it's still marginally thinner, with 20.51mm / 0.808in vs 22.32mm / 0.879in.
For me it's not that heavy, and it's still manageable as a pocket clip knife (not ideal though :D)I don't remember what mine weighed in at, but it's got to be up there with yours, it's a 4/5 layer, at the time I think it was the largest Syph did..
JR -
This is a MECHANIC with cow horn scales, 4 exposed, domed rivets. Was going to do a 3 rivet number with one hidden inside but forgot about it when drilling the scales. Oh well, still worked out good. Thanks be to God



-
This is a SPARTAN with western black walnut scales (Juglans hindsii) This is also called CLARO walnut with some very wild and lovely grain. I have some "stabilized" material of this same stuff which is pretty interesting. Like, it's basically plastic but looks and works like the real deal, 'cause it IS the real deal! Being a wood nut for many years the jury's out on the plasticized material, but it sure is hard. The scales on this one are fixed with adhesive.
Still wrestling with the camera aspect of all this so the color doesn't come across too well.



-
Those are so nice.

-
@WDY said:
This is a SPARTAN with western black walnut scales (Juglans hindsii) This is also called CLARO walnut with some very wild and lovely grain. I have some "stabilized" material of this same stuff which is pretty interesting. Like, it's basically plastic but looks and works like the real deal, 'cause it IS the real deal! Being a wood nut for many years the jury's out on the plasticized material, but it sure is hard. The scales on this one are fixed with adhesive.Still wrestling with the camera aspect of all this so the color doesn't come across too well.
Nice knives there! I too was wondering a bit about how the stabilised wood would be to work with and was positively surprised to find that it even took an oil finish more or less exactly how normal wood would.
-
Gifted from Mags.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login