And so it begins.... (My adventures into Alox!)
-
Great stuff Syph
Quite a few of us waiting with great antici..............pation on this one

Loving the idea of a 'secret' compartmentI guess at the pivot end the compartment/door is completely rounded so it can swing
- So a small indentation on the top of the knife/compartment when all closed up.
Very intrigued to see how the click shut mechanism works, and also how the compartment is opened from fully closed up position - Nail nick?
As I can't quite see those two things yet ???....... But I know for sure that you will have all that worked out!!
:D
EDIT: Ooops - Sorry
Just read your quoted post above and you explain this. I was wondering if there was a spring. This is going to be quite intricate.
The part that swings out has the spring. A leaf spring machined of Ti that will fit into the locking bump. That is also how the door is released.
The idea is to make use of the Ti material's natural spring force. Keep it simple.
When I first started thinking about this I was going to drill and tap holes and all kinds of things that would take time and make it less doable. Simple is always better. Keep in mind this is just a prototype. It will likely change as I actually test and use it. I also want to make it removable, so say you are going camping put in the one with 3 firesteels or something. I dont know exactly yet but Id like to get beyond just housing T&T.
Im also worried that every single person will want this on all future builds so I better make sure its 100% good to go and easy to machine before I start selling it. :D
This is going to be awesome! Looks like I may have to send you the mods you've built for a retrofit once you've worked out the bugs.
Sent from my iPhone using Tapatalk
-
Very cool idea Syph

Proud SAKMC member :)
-
Nice!

-
-
It's almost like it was with computers a few years ago. You buy one, you get home, take it out of the box and the damn thing is already of historical value... :o
-

Proud SAKMC member :)
-
Tried the same copper inlay I do for the cross, but for initials. It was not easy and I dont know if Id want to try again. But I got er done.
-
Nice job

JR -
That's nice, the initial pop at the right angle/lighting

Proud SAKMC member :)
-
Another work of art

Sent from my iPhone using Tapatalk
-
The initials turned out beautifully. Great looking SAK.
-
For some reason I dont trust photobucket anymore and I think I'll just continue to attach pics to the post.
Blue skeletonized!
-
Beauty!

Do you think the backside Philips on your ti customs like that can stand up to more torque than the stock vic?
Have you ever tested? >:D -
Oh that's sick

JR -
@Pablo O'Brien said:
Beauty!
Do you think the backside Philips on your ti customs like that can stand up to more torque than the stock vic?
Have you ever tested? >:DYes much more torque. I'd have to test to failure with a torque wrench but ti and a steel pivots beats soft aluminum and brass pins any day.
-
Always a lot of awesome in this thread when I visit it

-
Ive FINALLY come up with a way I like to hold all the scale tools people want. Drawing it up now in CAD then I can post what Im thinking of trying. The pen is still too thick to fit unless I can find an option for a thinner one, but regardless if this works I can fit ...
Toothpick
Tweezers
Small firesteel
Pin
Sewing needle and threadThat takes care of what most people would want, and there will be a small space left over to store whatever else could be jammed in there.
Ive been stuck forever trying to work out the mechanism. I know I could machine a little drawer hollow that opened in the scale, but how would it lock into place to avoid accidentally opening, and it would also have to be simple so that machining time/cost wasnt too much more and no extra parts like more screws and tapping would be needed.
I did have to go with much thicker Ti for the backscale 0.155" instead of the 0.100" I used now, but that at least this will provide a way to offer people what they want. It would still be slightly thinner than a stock SAK with plastic scales though (0.070" thinner) since it still wont have the outer liners. So still an ok compromise I think for those that would want this.
My breakthrough in mentally working on this was realizing how I could machine the drawer to have a built in retension spring to snap it home and become a solid part of the scale when not needed. A small nail nick would be exposed either on top on inside to pop it open. It would be part of the back scale and open upwards like a normal tool, but the hinge point would be towards the inside not where the normal tools pivot.
Began prototyping today. Very thick Ti scale pocketed out with pivot and locking bump on other end. Now to make the piece that fits in that space and holds the parts.

Im working on the fold out part today. This was my idea to allow it to lock since 0.050" thick Ti is nice and springy for say a pocket clip, I think this should leave me with a nice little tab to spring and click into the scale.
I wont know until I actually cut a piece and test it, but that's why they call it prototyping right.

-
Oh my, if you pull this off I'm refering to you as Sir Robert from then on...
-
@Mechanickal said:
Oh my, if you pull this off I'm refering to you as Sir Robert from then on...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
