Something to help you date your Vic SAKs based on tool evolution
-
@El Corkscrew said:
Here are the revisions I offer for Vic cellidors:
Thanks El C - This is great to get some feedback on the dating table

I have inserted *some comments *after you suggestions - Can anyone else comment, confirm, or dispute - Mainly on the first two items !!
Please let us know ..........1968 Last year for Sharpened Bottle opener/scraper
*Hmm - That is a dramatic change - Current version and SAAMS says 1980 - Although with a ? - So they were not sure - Some evidence please ! *1971 No "PAT" on Can Opener
*Also is a dramatic change - Current version and SAAMS also says 1980? - Ditto ! *1973 - 5 to 4 turn corkscrew
*This is an interesting one and we mentioned it in ano thread - Makes much more sense to me as I have some SAKs which have alu tipped tweezers but four turns CS - Which is not possible according to SAAMS - I am happy to update that one *

Back layer phillips:
*Yes we also discussed this in ano thread - We have never seen a no file/no can key square SD - and SAAMS is a bit devoid of dates for the back SD - and we are all agreed on the 1992 date - So I am happy to update based on your dates *

1952 - 1968 square, file, no can-key
1968 -1980 square, no file, can-key
1980 - 1992 round, can key
1992 - present round no can keyDivot Repair tool - 1992- 04?
*Sure why not? I think I guessed the current end date in my table ! :o *Emblem Inlay on front scales - 80 Stainless Steel, before they were nickel/silver
Yep this is the date that is in the tableWon't have time to get to it today, but I'll post my corroborating evidence soon. If you pay close attention in my collection videos, you will see. :)
-
@Huntsman said:
***Divot Repair tool - 1992- 04?
*Sure why not? I think I guessed the current end date in my table ! :o *Emblem Inlay on front scales - 80 Stainless Steel, before they were nickel/silver
Yep this is the date that is in the table***Sorry, couldn't see the other chart, even when I clicked the link.
-
@El Corkscrew said:
Won't have time to get to it today, but I'll post my corroborating evidence soon. If you pay close attention in my collection videos, you will see. :)That would be great - If it's not too much trouble - Otherwise I can check the vids
- I did see them but did not have time to view at the time
Thanks El C
@El Corkscrew said:
Sorry, couldn't see the other chart, even when I clicked the link.Ah Photobucket problem I think! I often cannot see Syph's piccies - which is highly infuriating!
The later versions are far superior to the earlier ones in terms of content and usability
There are attachments with jpegs and pdfs if you cannot get the PB link to work.Once we have this sorted out I will update and publish - Probably for the final time, as it has not changed much in a long time
Although my current version has quite a few changes from the last one in this thread.
:o
And I think it will be a really good artefact.Thanks again for your input
- I did see them but did not have time to view at the time
-
First I'll address the "+PAT" on the can opener, the wire scraper on the bottle opener.
Here we have a Climber and a Standard, both w/ 5-turn corkscrew, Key Ring, and clip point small blade. Neither have +PAT, indicating this was removed sometime before '73 - my guess is '71
For the wire scraper I may have been mistaken about '68, perhaps '71 on this as well.
The Standard has wire scraper on the bottle opener while the Climber does not. This indicates that they dropped the scraper sometime before '73 for sure... maybe '71 but it's a total guess.
1 Climber
2 Climber
3 Standard
4Standard



-
Here are some more examples of 4-turn corkscrew being '73 change
You'll also see find no wire scrapers on these bottle openers
1 Standard w/ box '70s
2 Champion '70s
3 Camper w/ box 70s
4 Championw/ box '70s



-
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?

Very interesting and cool.
-
@Pablo O'Brien said:
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?
Very interesting and cool.
I'd say so... I think the change to a 4 turn turn from 5 turn corkscrew on 84 MM might even be earlier.the vintage Tinker smalls and Tourists I have with clip point blade all 4 turn corkscrews...
-
Found some supporting evidence for '71 for the +PAT
Here's a '71 Soldier w/ +PAT and a "73 Without
(I decided to get the '71... Now I have Vic's from 71,81,91,01 :ahhh)


-
@El Corkscrew said:
@Pablo O'Brien said:
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?

Very interesting and cool.
I'd say so... I think the change to a 4 turn turn from 5 turn corkscrew on 84 MM might even be earlier.the vintage Tinker smalls and Tourists I have with clip point blade all 4 turn corkscrews...
If the blade you are talking about is on the bottom... The climber small I mentioned also has it.
-
@Pablo O'Brien said:
@El Corkscrew said:
@Pablo O'Brien said:
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?

Very interesting and cool.
I'd say so... I think the change to a 4 turn turn from 5 turn corkscrew on 84 MM might even be earlier.the vintage Tinker smalls and Tourists I have with clip point blade all 4 turn corkscrews...
If the blade you are talking about is on the bottom... The climber small I mentioned also has it.
You mean the climber small has 5-turn?
-
@El Corkscrew said:
@Pablo O'Brien said:
@El Corkscrew said:
@Pablo O'Brien said:
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?

Very interesting and cool.
I'd say so... I think the change to a 4 turn turn from 5 turn corkscrew on 84 MM might even be earlier.the vintage Tinker smalls and Tourists I have with clip point blade all 4 turn corkscrews...
If the blade you are talking about is on the bottom... The climber small I mentioned also has it.
You mean the climber small has 5-turn?
Pics of parts.
Maybe I should put it back together?


-
Man, what a sweet knife (at one point)
Yeah I'd say pre 71 for those parts... Maybe 68... none of the 84mm w/ clip point small blade that I own have a 5 turn... which makes me think this changed earlier...
-
@El Corkscrew said:
Man, what a sweet knife (at one point)Yeah I'd say pre 71 for those parts... Maybe 68... none of the 84mm w/ clip point small blade have a 5 turn... which makes me think this changed earlier...
Or it could have been sent to vic in the 70's?
When I got it, the blade backspring was knackered. The place on the spring where the corkscrew rubs was worn enough that all the tools on that layer were flopping out. :o
And the corkscrew tang is a little worn too.... just enough that with a new unworn spring, it has a little less tension than it should, but more than enough.
Gosh...
-
@El Corkscrew said:
Man, what a sweet knife (at one point)Yeah I'd say pre 71 for those parts... Maybe 68... none of the 84mm w/ clip point small blade that I own have a 5 turn... which makes me think this changed earlier...
Hi, El C, maybe this small climber that I have can give some light to confirm your '68 theory.
It has clip point small blade , 5 turn corkscrew, "PAT" can opener, nickel tweezers and ... Bail !!

Cheers
-
@El Corkscrew said:
Man, what a sweet knife (at one point)
Yeah I'd say pre 71 for those parts... Maybe 68... none of the 84mm w/ clip point small blade that I own have a 5 turn... which makes me think this changed earlier...
Hi, El C, maybe this small climber that I have can give some light to confirm your '68 theory.
It has clip point small blade , 5 turn corkscrew, "PAT" can opener, nickel tweezers and ... Bail !!

Cheers
Interesting! :ahhh

Mine looks the same, but no bail. ??? :'( -
There are variations through the ages with and without bail as well as with and without scale tools.... they liked to keep it interesting
-
I'd like to make a diagram with only the evolution of Soldier tools as they are a little different...
-
I’d study that diagram. :D
-
@El Corkscrew said:
I'd like to make a diagram with only the evolution of Soldier tools as they are a little different...Oooo - That sounds like a good idea/project
:D ......... Shall I have a crack at it ??? - I'd use a similar template
- But possibly transpose the rows and columns as there are not too many tools - But several changes (ie dates)
I've been doing quite bit of work in the Wiki recently on the Solidiers - So the info is quite fresh in my mind
Or are you going to do it El C ?
Am definitely going to update and publish version VII of this one - in the next couple of weeks
- But possibly transpose the rows and columns as there are not too many tools - But several changes (ie dates)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
