Something to help you date your Vic SAKs based on tool evolution
-
First I'll address the "+PAT" on the can opener, the wire scraper on the bottle opener.
Here we have a Climber and a Standard, both w/ 5-turn corkscrew, Key Ring, and clip point small blade. Neither have +PAT, indicating this was removed sometime before '73 - my guess is '71
For the wire scraper I may have been mistaken about '68, perhaps '71 on this as well.
The Standard has wire scraper on the bottle opener while the Climber does not. This indicates that they dropped the scraper sometime before '73 for sure... maybe '71 but it's a total guess.
1 Climber
2 Climber
3 Standard
4Standard



-
Here are some more examples of 4-turn corkscrew being '73 change
You'll also see find no wire scrapers on these bottle openers
1 Standard w/ box '70s
2 Champion '70s
3 Camper w/ box 70s
4 Championw/ box '70s



-
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?

Very interesting and cool.
-
@Pablo O'Brien said:
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?
Very interesting and cool.
I'd say so... I think the change to a 4 turn turn from 5 turn corkscrew on 84 MM might even be earlier.the vintage Tinker smalls and Tourists I have with clip point blade all 4 turn corkscrews...
-
Found some supporting evidence for '71 for the +PAT
Here's a '71 Soldier w/ +PAT and a "73 Without
(I decided to get the '71... Now I have Vic's from 71,81,91,01 :ahhh)


-
@El Corkscrew said:
@Pablo O'Brien said:
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?

Very interesting and cool.
I'd say so... I think the change to a 4 turn turn from 5 turn corkscrew on 84 MM might even be earlier.the vintage Tinker smalls and Tourists I have with clip point blade all 4 turn corkscrews...
If the blade you are talking about is on the bottom... The climber small I mentioned also has it.
-
@Pablo O'Brien said:
@El Corkscrew said:
@Pablo O'Brien said:
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?

Very interesting and cool.
I'd say so... I think the change to a 4 turn turn from 5 turn corkscrew on 84 MM might even be earlier.the vintage Tinker smalls and Tourists I have with clip point blade all 4 turn corkscrews...
If the blade you are talking about is on the bottom... The climber small I mentioned also has it.
You mean the climber small has 5-turn?
-
@El Corkscrew said:
@Pablo O'Brien said:
@El Corkscrew said:
@Pablo O'Brien said:
So would that mean that the climber small I tore apart, with 5 turn corkscrew, +pat on can opener, scraper on the bottle opener was likely made in the late 60's?

Very interesting and cool.
I'd say so... I think the change to a 4 turn turn from 5 turn corkscrew on 84 MM might even be earlier.the vintage Tinker smalls and Tourists I have with clip point blade all 4 turn corkscrews...
If the blade you are talking about is on the bottom... The climber small I mentioned also has it.
You mean the climber small has 5-turn?
Pics of parts.
Maybe I should put it back together?


-
Man, what a sweet knife (at one point)
Yeah I'd say pre 71 for those parts... Maybe 68... none of the 84mm w/ clip point small blade that I own have a 5 turn... which makes me think this changed earlier...
-
@El Corkscrew said:
Man, what a sweet knife (at one point)Yeah I'd say pre 71 for those parts... Maybe 68... none of the 84mm w/ clip point small blade have a 5 turn... which makes me think this changed earlier...
Or it could have been sent to vic in the 70's?
When I got it, the blade backspring was knackered. The place on the spring where the corkscrew rubs was worn enough that all the tools on that layer were flopping out. :o
And the corkscrew tang is a little worn too.... just enough that with a new unworn spring, it has a little less tension than it should, but more than enough.
Gosh...
-
@El Corkscrew said:
Man, what a sweet knife (at one point)Yeah I'd say pre 71 for those parts... Maybe 68... none of the 84mm w/ clip point small blade that I own have a 5 turn... which makes me think this changed earlier...
Hi, El C, maybe this small climber that I have can give some light to confirm your '68 theory.
It has clip point small blade , 5 turn corkscrew, "PAT" can opener, nickel tweezers and ... Bail !!

Cheers
-
@El Corkscrew said:
Man, what a sweet knife (at one point)
Yeah I'd say pre 71 for those parts... Maybe 68... none of the 84mm w/ clip point small blade that I own have a 5 turn... which makes me think this changed earlier...
Hi, El C, maybe this small climber that I have can give some light to confirm your '68 theory.
It has clip point small blade , 5 turn corkscrew, "PAT" can opener, nickel tweezers and ... Bail !!

Cheers
Interesting! :ahhh

Mine looks the same, but no bail. ??? :'( -
There are variations through the ages with and without bail as well as with and without scale tools.... they liked to keep it interesting
-
I'd like to make a diagram with only the evolution of Soldier tools as they are a little different...
-
I’d study that diagram. :D
-
@El Corkscrew said:
I'd like to make a diagram with only the evolution of Soldier tools as they are a little different...Oooo - That sounds like a good idea/project
:D ......... Shall I have a crack at it ??? - I'd use a similar template
- But possibly transpose the rows and columns as there are not too many tools - But several changes (ie dates)
I've been doing quite bit of work in the Wiki recently on the Solidiers - So the info is quite fresh in my mind
Or are you going to do it El C ?
Am definitely going to update and publish version VII of this one - in the next couple of weeks
- But possibly transpose the rows and columns as there are not too many tools - But several changes (ie dates)
-
Either way is cool with me. Your chart is pretty cool so if it's easier for you, go right ahead. :)
-
Well folks - I can’t believe its two years since I last published an update to this spreadsheet.
Nothing much happened for the first 18 months or so – But a lot has happened in the last six – So it’s time to issue ***Version viii ***- Which is a very significant version
More about that later – Here's a very high level summary of the changes …..-
We have a few new rows for some of the later years
-
We have a new column (the last one)
-
We also have ***several new tools ***(not in new columns !?) – See if you can spot them ??? ;)
-
Some formatting and usability changes

-
And quite a few date shifts from the previous versions

I have made refinements to the table using information from threads on this forum, other internet locations, and a little of my own research.
A big 'Thank you' to everyone who has contributed to date discussions on this forum – especially Jazzbass, whose knowledge never ceases to amaze, and El Corkscrew and all other contributors to this thread and others.This version is significant for the following reasons:
[list type=decimal]* We have deviated from a couple of well-known SAK dating resources: SAAMS and even Victorinox themselves, eg on external rivets, opener and corkscrew changes. This step was not taken lightly - However I believe the knowledge here is more accurate than these sources !! :o-
I can’t believe how much this spready has evolved over the years – Compare the first and last versions in this thread .…. however .…. This may well be the last version of the spreadsheet :o :'( As I can't imagine too many more changes
-
I am planning to put this version into SAKWiki. Mr. E requested this early in this thread – I think this version is possibly worthy – However it will be suitably disclaimed/explained – Not least of which because SAK dating is as much of an art as a science!! Please let me know if anyone has any objections to this!
As always feedback on all content most welcome
Here are the PDF and Jpeg versions …….
I hope they are useful***ENJOY *** :ahhh
📎 Vic Tool Evolution Ver viii.pdf
-
-
Wonderfull...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
