Wave Owners Club
-
Nice old Wave and thanks for sharing

-
Also welcome to

-
Thanks! here is the sheath from ebay seller mytmo555.
Pretty nice really happy with it. Only $24, really good deal! -
Welcome to the club,that sheath is

-
Hope I'm putting this in the right place, but, here be my Wave. I originally had a PST, that my father got me for Christmas in like 2002 or something, and I really liked it, with its only big annoyance being that in plier form, the handles really dug in to your hands. To my great sadness, I lost it around the time I moved out for college, so after an appropriate grief period, I started looking at replacing it, and settled on the Wave.
I went to this mall's tool & camping section and asked for one, and they said they're all out of the standard one, but he had the 25th anniversary model for 20€ more. Being on a student budget, my rational mind said to pass it up, but it was quickly stomped to death by the WANT!! part of my mind, so I got it. Came with the collector's edition tin and all. Will have to post a photo of that later.



The straight blade has seen better days. Like an idiot, a few years back I tried to pry something with it and the tip snapped off. I lacked the skill or tools to re-profile it, so I gave it to someone who did, and he did make it sharp as hell, but to him, aesthetics is a non-issue in tools, hence the scratches. Functionally, there's nothing wrong with it. Some day, I'll send it to the importer for them to replace the blade, because it's shockingly difficult to find them as replacement parts to swap yourself.

Aside from the main blade, the only part that's been damaged, is the eye-glass driver bit. The flat end of it got chipped years and years ago. To return the original favor, I bought my father a standard Wave for Christmas a few years ago, but he felt he won't have as much use for the eye-glass bit, so we swapped. Discounting that, and the wear on the standard bit coating, it's still like new. I even like the scissors, which you might say are the weakest part of the tool.I suppose most people would just keep the anniversary edition in a collection, but I put mine to use then, and it's been in use almost daily since then for about 8 years now. It keeps its shine remarkably well. The included sheath is still intact, but the velcro is completely spent, which I why I got the Skinth, which WoodsDuck pointed out to me.

-
@Telajänis said:
Hope I'm putting this in the right place, but, here be my Wave. I originally had a PST, that my father got me for Christmas in like 2002 or something, and I really liked it, with its only big annoyance being that in plier form, the handles really dug in to your hands. To my great sadness, I lost it around the time I moved out for college, so after an appropriate grief period, I started looking at replacing it, and settled on the Wave.
I went to this mall's tool & camping section and asked for one, and they said they're all out of the standard one, but he had the 25th anniversary model for 20€ more. Being on a student budget, my rational mind said to pass it up, but it was quickly stomped to death by the WANT!! part of my mind, so I got it. Came with the collector's edition tin and all. Will have to post a photo of that later.



The straight blade has seen better days. Like an idiot, a few years back I tried to pry something with it and the tip snapped off. I lacked the skill or tools to re-profile it, so I gave it to someone who did, and he did make it sharp as hell, but to him, aesthetics is a non-issue in tools, hence the scratches. Functionally, there's nothing wrong with it. Some day, I'll send it to the importer for them to replace the blade, because it's shockingly difficult to find them as replacement parts to swap yourself.

Aside from the main blade, the only part that's been damaged, is the eye-glass driver bit. The flat end of it got chipped years and years ago. To return the original favor, I bought my father a standard Wave for Christmas a few years ago, but he felt he won't have as much use for the eye-glass bit, so we swapped. Discounting that, and the wear on the standard bit coating, it's still like new. I even like the scissors, which you might say are the weakest part of the tool.I suppose most people would just keep the anniversary edition in a collection, but I put mine to use then, and it's been in use almost daily since then for about 8 years now. It keeps its shine remarkably well. The included sheath is still intact, but the velcro is completely spent, which I why I got the Skinth, which WoodsDuck pointed out to me.

Welcome to the club mate,great story and very cool to use it as it is a tool to be used

-
Welcome to

You could try Loki /topic/64314 for a replacement blade if you don't mind doing it yourself, you will just need a few more posts to be able to PM him. -
Awesome pics of an awesome Wave :o Very nice telajanus

-
Count me in?

-
Welcome to the club Gadsden
Nice setup

-
Welcome guys and great stories

-
Welcome New club new members 

-
added an awl from the PST, easy to do!
Next question: Does the 154CM or S30V blade from newer LM's fit the classic/OG wave?

-
Thank you! It'll be getting the rebar head and awl treatment eventually. I liked the china sheath so much that when it tore up I replaced the bad section of leather, onboard is a fisher pen, firesteel.com 3/8"×4" firesteel, and an extra hair tie for my wife (hers breaks often).
-
Count me in?
Leather sheath with the logo embossed, sweet!
Thanks!
-
added an awl from the PST, easy to do!
Next question: Does the 154CM or S30V blade from newer LM's fit the classic/OG wave?
Nice mod vario.
Not sure about the ability to drop in newer blades.
But sure does make sense to have an awl rather than three flat drivers!
Unless you use the screwdrivers and have no use for an awl

-
I always knew I would get a Wave. I discovered LMs when I got my father a new Juice S2 for his birthday in April 2017, then I got myself one, and a second-hand Juice Pro and Squirt PS4 (from the sales here), and a battered up S4 from US E-bay (postage costs as much as the item when I buy from the US >:( ). Now I have a Wave picked up in the UK from Shpock (second hand sales site). Cost me £37 including postage and PayPal fees (about US$48).
I gave it a quick clean in warm soapy water --- a lot of gunk and grime came out, especially from the saw slot.
The serrated blade had flecks of metal on it --- looks like it may have been used to cut some thin wires? There's a little bit of rusting on that blade.
I'd not seen a LM Wave plain blade up close before, and I initially thought someone had tried to sharpen the top, Bowie style.

The pliers are not tight and have a tiny bit of wobble in them, not much to worry about, but just enough slack so that the handles do not come together straight unless I give them a little squeeze and then all is fine.

There's some rusting on the pliers. The flat head and scissors open nicely, the flat heads look unused, and the scissors are good and sharp. The large flat head in the other handle is clean and sharp but a bit tight to open, and the philips head and can opener are very tightly held together --- I can get them apart, but it needs a bit of effort and my Squirt PS4.
I've given all parts a liberal spraying with WD40 and will let that soak in for a while. Then I'll go to work cleaning it up some more. All in all, I'm happy with this Wave. Blades lock nicely, tools show no or small use. The bits of rusting will probably polish off. I think this will replace my Juice Pro. I was wondering about getting some TS10 pentalobe bits to dis-assemble and do some deep cleaning, and even add in two New Wave bit holders I have, but I'm not sure about that now, since it's a nice tool and I'm not sure I want to mess it up.
This is an 0401 Wave (both handles), so although I now have a Wave, I still don't have a (New) Wave! ;)
-
@BePrepared said:
I always knew I would get a Wave. I discovered LMs when I got my father a new Juice S2 for his birthday in April 2017, then I got myself one, and a second-hand Juice Pro and Squirt PS4 (from the sales here), and a battered up S4 from US E-bay (postage costs as much as the item when I buy from the US >:( ). Now I have a Wave picked up in the UK from Shpock (second hand sales site). Cost me £37 including postage and PayPal fees (about US$48).I gave it a quick clean in warm soapy water --- a lot of gunk and grime came out, especially from the saw slot.
The serrated blade had flecks of metal on it --- looks like it may have been used to cut some thin wires? There's a little bit of rusting on that blade.
I'd not seen a LM Wave plain blade up close before, and I initially thought someone had tried to sharpen the top, Bowie style.

The pliers are not tight and have a tiny bit of wobble in them, not much to worry about, but just enough slack so that the handles do not come together straight unless I give them a little squeeze and then all is fine.

There's some rusting on the pliers. The flat head and scissors open nicely, the flat heads look unused, and the scissors are good and sharp. The large flat head in the other handle is clean and sharp but a bit tight to open, and the philips head and can opener are very tightly held together --- I can get them apart, but it needs a bit of effort and my Squirt PS4.
I've given all parts a liberal spraying with WD40 and will let that soak in for a while. Then I'll go to work cleaning it up some more. All in all, I'm happy with this Wave. Blades lock nicely, tools show no or small use. The bits of rusting will probably polish off. I think this will replace my Juice Pro. I was wondering about getting some TS10 pentalobe bits to dis-assemble and do some deep cleaning, and even add in two New Wave bit holders I have, but I'm not sure about that now, since it's a nice tool and I'm not sure I want to mess it up.
This is an 0401 Wave (both handles), so although I now have a Wave, I still don't have a (New) Wave! ;)
I wouldn't remove the handles from the plier head. Its hard to reassemble the plier head, I did it yesterday and it a lot of effort to get it back together because the hole tolerances are so tight. Its likely that tightening the torx bolts won't make your tool any tighter because what seems to happen is the plier head gets looser over time. Tightening the torx bolts will make the blades and file harder to open. I think you have to use a hammer and punch to tighten the rivet inside the pliers. My LM wave looked even worse than yours when I bought it off eBay a week or two ago, I let it soak in penetrating oil for 3 days and then cleaned it with carb cleaner and it looked brand new, then I oiled it with some sewing machine oil in all the pivots. For the penetrating oil soak, I put it in a ziplock and sprayed the penetrating oil into the bag. If its like mine, nearly all the surface rust will just come off with a wipe after soaking in the oil and it will be very shiny.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






