Wave Owners Club
-
Welcome to

You could try Loki /topic/64314 for a replacement blade if you don't mind doing it yourself, you will just need a few more posts to be able to PM him. -
Awesome pics of an awesome Wave :o Very nice telajanus

-
Count me in?

-
Welcome to the club Gadsden
Nice setup

-
Welcome guys and great stories

-
Welcome New club new members 

-
added an awl from the PST, easy to do!
Next question: Does the 154CM or S30V blade from newer LM's fit the classic/OG wave?

-
Thank you! It'll be getting the rebar head and awl treatment eventually. I liked the china sheath so much that when it tore up I replaced the bad section of leather, onboard is a fisher pen, firesteel.com 3/8"×4" firesteel, and an extra hair tie for my wife (hers breaks often).
-
Count me in?
Leather sheath with the logo embossed, sweet!
Thanks!
-
added an awl from the PST, easy to do!
Next question: Does the 154CM or S30V blade from newer LM's fit the classic/OG wave?
Nice mod vario.
Not sure about the ability to drop in newer blades.
But sure does make sense to have an awl rather than three flat drivers!
Unless you use the screwdrivers and have no use for an awl

-
I always knew I would get a Wave. I discovered LMs when I got my father a new Juice S2 for his birthday in April 2017, then I got myself one, and a second-hand Juice Pro and Squirt PS4 (from the sales here), and a battered up S4 from US E-bay (postage costs as much as the item when I buy from the US >:( ). Now I have a Wave picked up in the UK from Shpock (second hand sales site). Cost me £37 including postage and PayPal fees (about US$48).
I gave it a quick clean in warm soapy water --- a lot of gunk and grime came out, especially from the saw slot.
The serrated blade had flecks of metal on it --- looks like it may have been used to cut some thin wires? There's a little bit of rusting on that blade.
I'd not seen a LM Wave plain blade up close before, and I initially thought someone had tried to sharpen the top, Bowie style.

The pliers are not tight and have a tiny bit of wobble in them, not much to worry about, but just enough slack so that the handles do not come together straight unless I give them a little squeeze and then all is fine.

There's some rusting on the pliers. The flat head and scissors open nicely, the flat heads look unused, and the scissors are good and sharp. The large flat head in the other handle is clean and sharp but a bit tight to open, and the philips head and can opener are very tightly held together --- I can get them apart, but it needs a bit of effort and my Squirt PS4.
I've given all parts a liberal spraying with WD40 and will let that soak in for a while. Then I'll go to work cleaning it up some more. All in all, I'm happy with this Wave. Blades lock nicely, tools show no or small use. The bits of rusting will probably polish off. I think this will replace my Juice Pro. I was wondering about getting some TS10 pentalobe bits to dis-assemble and do some deep cleaning, and even add in two New Wave bit holders I have, but I'm not sure about that now, since it's a nice tool and I'm not sure I want to mess it up.
This is an 0401 Wave (both handles), so although I now have a Wave, I still don't have a (New) Wave! ;)
-
@BePrepared said:
I always knew I would get a Wave. I discovered LMs when I got my father a new Juice S2 for his birthday in April 2017, then I got myself one, and a second-hand Juice Pro and Squirt PS4 (from the sales here), and a battered up S4 from US E-bay (postage costs as much as the item when I buy from the US >:( ). Now I have a Wave picked up in the UK from Shpock (second hand sales site). Cost me £37 including postage and PayPal fees (about US$48).I gave it a quick clean in warm soapy water --- a lot of gunk and grime came out, especially from the saw slot.
The serrated blade had flecks of metal on it --- looks like it may have been used to cut some thin wires? There's a little bit of rusting on that blade.
I'd not seen a LM Wave plain blade up close before, and I initially thought someone had tried to sharpen the top, Bowie style.

The pliers are not tight and have a tiny bit of wobble in them, not much to worry about, but just enough slack so that the handles do not come together straight unless I give them a little squeeze and then all is fine.

There's some rusting on the pliers. The flat head and scissors open nicely, the flat heads look unused, and the scissors are good and sharp. The large flat head in the other handle is clean and sharp but a bit tight to open, and the philips head and can opener are very tightly held together --- I can get them apart, but it needs a bit of effort and my Squirt PS4.
I've given all parts a liberal spraying with WD40 and will let that soak in for a while. Then I'll go to work cleaning it up some more. All in all, I'm happy with this Wave. Blades lock nicely, tools show no or small use. The bits of rusting will probably polish off. I think this will replace my Juice Pro. I was wondering about getting some TS10 pentalobe bits to dis-assemble and do some deep cleaning, and even add in two New Wave bit holders I have, but I'm not sure about that now, since it's a nice tool and I'm not sure I want to mess it up.
This is an 0401 Wave (both handles), so although I now have a Wave, I still don't have a (New) Wave! ;)
I wouldn't remove the handles from the plier head. Its hard to reassemble the plier head, I did it yesterday and it a lot of effort to get it back together because the hole tolerances are so tight. Its likely that tightening the torx bolts won't make your tool any tighter because what seems to happen is the plier head gets looser over time. Tightening the torx bolts will make the blades and file harder to open. I think you have to use a hammer and punch to tighten the rivet inside the pliers. My LM wave looked even worse than yours when I bought it off eBay a week or two ago, I let it soak in penetrating oil for 3 days and then cleaned it with carb cleaner and it looked brand new, then I oiled it with some sewing machine oil in all the pivots. For the penetrating oil soak, I put it in a ziplock and sprayed the penetrating oil into the bag. If its like mine, nearly all the surface rust will just come off with a wipe after soaking in the oil and it will be very shiny.
-
@BePrepared said:
I always knew I would get a Wave. I discovered LMs when I got my father a new Juice S2 for his birthday in April 2017, then I got myself one, and a second-hand Juice Pro and Squirt PS4 (from the sales here), and a battered up S4 from US E-bay (postage costs as much as the item when I buy from the US >:( ). Now I have a Wave picked up in the UK from Shpock (second hand sales site). Cost me £37 including postage and PayPal fees (about US$48).This is an 0401 Wave (both handles), so although I now have a Wave, I still don't have a (New) Wave! ;)
Congrats on the Wave! Many of us actually prefer the older Wave model like yours. I had a new Generation BO Wave but didn't care for it and sold it.
I love my Wave enough that I bought a pristine backup in a gorgeous leather sheath and it is there in case my every day Wave ever suffers some catastrophic failure.
Enjoy that Wave!

Sent from my iPhone using Tapatalk
-
The blades I can now crack open with one hand, just about. The oiling has made the philips and can opener side much easier to open. There's still some brown residue coming out around the joints, so I'm going to have to
playwork with it some more. :)I doubt I will take it apart now. It's so nicely put together. I notice the second largest flat head just about fits the hex bit extender that I use on my philips on the Juice S2. This Wave philips does not seem to be a fit for the bit extender.
-
@BePrepared said:
The blades I can now crack open with one hand, just about. The oiling has made the philips and can opener side much easier to open. There's still some brown residue coming out around the joints, so I'm going to have toplaywork with it some more. :)I doubt I will take it apart now. It's so nicely put together. I notice the second largest flat head just about fits the hex bit extender that I use on my philips on the Juice S2. This Wave philips does not seem to be a fit for the bit extender.
Yep keep squirting penetrating oil until the brown stops coming out
It is very easy to take apart the handle ends compared to the pliers, so if the screwdrivers, scissors, or bottlecap opener are too tight, you can easily readjust the tension. -
Very nice OG Wave :o
They do clean up pretty easy (takes time and some effort still) but that effort is definitely worth it with the older Waves 
Keep us updated about the restoration

-
~
Yep keep squirting penetrating oil until the brown stops coming out
~You know, I do believe those are the same instructions I received sometime ago from a doctor.... the brown still keeps coming out

Oh wow lol
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






