And so it begins.... (My adventures into Alox!)
-
Brilliant - I was wondering how the spring would work
I had all sorts of weird visions in my head with separate scissor like springs, and was wondering how they would attach etc etcNow I get it
And as you said earlier .... the simpler the better- Bring on version 2.0 - Production version ??? :D
Ya a good thickness for a Ti pocket clip is 0.050" thick and thats what I left there,... but a pocket clip has alot more length for leverage. Since this one is scrap now, what I'll do is grind away at the bottom to thin it until it feels just right, then measure that and adjust.
I also need to make the entire thing a bit longer. I needed exactly 2 inches of length and didnt account for the spring part taking up part of that.
You might want to make the whole spring bar thinner, rather than just at one spot - that way, the spring bar bends along its entire length rather than just at one point which could fatigue.
Ya good point. Im trying to think of another mechanism that could also work, and be simple to machine, but cant come up with anything else.
-
Brilliant - I was wondering how the spring would work
I had all sorts of weird visions in my head with separate scissor like springs, and was wondering how they would attach etc etcNow I get it
And as you said earlier .... the simpler the better- Bring on version 2.0 - Production version ??? :D
Ya a good thickness for a Ti pocket clip is 0.050" thick and thats what I left there,... but a pocket clip has alot more length for leverage. Since this one is scrap now, what I'll do is grind away at the bottom to thin it until it feels just right, then measure that and adjust.
I also need to make the entire thing a bit longer. I needed exactly 2 inches of length and didnt account for the spring part taking up part of that.
You might want to make the whole spring bar thinner, rather than just at one spot - that way, the spring bar bends along its entire length rather than just at one point which could fatigue.
Ya good point. Im trying to think of another mechanism that could also work, and be simple to machine, but cant come up with anything else.
How about a (coil) spring and a ball bearing detent?
-
I guess the dimple could be slightly less deep and a tiny bit higher - so less force required to open ???
Could you have a pocket in the end of the main body of the sak containing a spring (ball pen size ish) that had a tiny knob on the end that located into a dimple going the other way in the swinging drawer ???
Much more difficult to make/source I guess, the spring would need to be fixed at one end, and possibly a point of failure.Hey how about machining a spring like you have now, but put it in the knife handle with the knob at the bottom and the dimple in the drawer at the bottom.
That way the spring is much more protected, less exposed and could be made thinner.
Hmm would be tricky to machine I guess as you'd need to detach it from the handle somehow along its length.
Maybe a separate piece that had a knob that fixed itself into a slot in the handle at the 'top'? I'd need to draw a piccie
Hmm yes this is getting complicated -
Ah yes George - That is a more refined version of what I was trying to say with my first suggestion
:)
And the ball bearing idea would be perfect - Maybe ??? -
-
Maybe a separate piece that had a knob that fixed itself into a slot in the handle at the 'top'? I'd need to draw a piccie
This is what I meant.....
Still like the coiled spring and ball bearing better!!
Ya I thought of doing it in reverse like that, but I cant machine it that way since it would be another operation and setup to free the cut spring from the handle. My goal is no other parts except the Titanium handle and holder. When I ground ver 1 thinner it worked no problem, so it will jsut be a matter of fine tuning it, and then making sure its repeatable.
Ver 2 is also longer and the release notch will be further toward the end. In testing with just the open void it actually held more than I thought and if I stuffed in some cotton for tinder, nothing rattled.
I see going forward to offer options ( thats the whole point of custom anyhow ) for drawers. Something with slots for just a few items, or just open to hold whatever. The open drawer would hold the max since there would be no extra material in there for dividers.
Im Toying with putting a spring on the bottom of the drawer as well, so the release would actually let the drawer pop up slightly and be easier to open. I'll have a ver 2 prototype later today. That 0.160" thick Ti is a PAIN to cut with my puny band saw. Id say it takes about 10 minutes to cut out a 1x4 piece of Ti. I have a feeeling I will be able to use slightly thinner Ti in the final product though, I think 0.140" will be enough. The pocket depth I cut is 0.100" so right now I have a 0.060" wall thickness which in Ti is way overkill since its hardly even structural since the center rib of the backscale takes all the forces.
I love making parts!
:D :D :D
-
And I approve of your latest R&D efforts!

:D
-
I know you're not really doing 93mm mods anymore but curious if you (or any of your sources) has any interest in making custom 93mm blades? I know a few years ago you had some made with CPM-154. I've been hunting for somebody to make me an upgraded 93mm blade.
-
All this is very awesome Syph
Excited to see how this all turns out with the finished product
After you get all the fine tuning would it be to hard to get a video clip up on how this all operates

-
@Poncho65 said:
All this is very awesome Syph
Excited to see how this all turns out with the finished product
After you get all the fine tuning would it be to hard to get a video clip up on how this all operates

Absolutely. I was going to put up some more YouTube videos once I'm done. It's been along time since I put up any content. I've got a folder full of emails for people ready to order this already so I really want to make sure its perfect before I sell any.
-
@mbp said:
I know you're not really doing 93mm mods anymore but curious if you (or any of your sources) has any interest in making custom 93mm blades? I know a few years ago you had some made with CPM-154. I've been hunting for somebody to make me an upgraded 93mm blade.There are lots of people who will make custom blades. I bet you could find someone on blade forums for that type of work. Or if you want I could give you the contact details of who I used for those blades. I have 2 of those left I never used but there were very thick.
Edit: I had a dig though my emails and found his name.
Paul Cooper Email: byksm@yahoo.com
He did great work and it was obvious in communicating with him he knew what he was talking about and had no problem making different blade shapes and adding the nail nicks etc. He bought the steel and ground the blades for me. I got them heat treated. There are lots of places to do that as well.
They were great blades, and I do want to make my own someday, but I really dont have the time until I finish the other projects. Plus for an oven and grinder Id be in at least $4k and Im not ready to invest that much right now to make blades. I need a proper air compressor first and to get my blasting booth setup.


If you want the blades to fit in a standard SAK then they would need to be bent to fit around the awl, like stock blades are. Fitting these huge blades was crazy hard and I wouldnt want to do that again. :D
I want drop in replacements for the 91mm blades, thats what Id be after. In one of the new stainless super steels. At least in S35VN or better.
-
I know you're not really doing 93mm mods anymore but curious if you (or any of your sources) has any interest in making custom 93mm blades? I know a few years ago you had some made with CPM-154. I've been hunting for somebody to make me an upgraded 93mm blade.
There are lots of people who will make custom blades. I bet you could find someone on blade forums for that type of work. Or if you want I could give you the contact details of who I used for those blades. I have 2 of those left I never used but there were very thick.
Edit: I had a dig though my emails and found his name.
Paul Cooper Email: byksm@yahoo.com
He did great work and it was obvious in communicating with him he knew what he was talking about and had no problem making different blade shapes and adding the nail nicks etc. He bought the steel and ground the blades for me. I got them heat treated. There are lots of places to do that as well.
They were great blades, and I do want to make my own someday, but I really dont have the time until I finish the other projects. Plus for an oven and grinder Id be in at least $4k and Im not ready to invest that much right now to make blades. I need a proper air compressor first and to get my blasting booth setup.


If you want the blades to fit in a standard SAK then they would need to be bent to fit around the awl, like stock blades are. Fitting these huge blades was crazy hard and I wouldnt want to do that again. :D
I want drop in replacements for the 91mm blades, thats what Id be after. In one of the new stainless super steels. At least in S35VN or better.
Thank you very much for the information, I will reach out to him.. My thought (and hope) is to get an upgraded blade suitable for use with the existing blade/awl backspring... save a bit of money and energy that way. That would mean keeping the stock around the 3mm mark. Does that sound feasible?
I don't see an easy method of keeping the awl in that instance, it would just be a blade-only layer. Getting a stronger main blade in a supersteel is a worthwhile tradeoff to losing the awl IMO.
-
Do you think the swing out drawer could also be implemented in a 93mm model? Because that could make a farmer x pretty much the ultimate sak for me...

-
-
This is all so amazing Syph
. Your generosity in taking us all along in this journey so unselfishly. This hinged compartment is very intriguing. Sad for Mon as he will again be sending in his TiRogue for yet another face lift :D -
@Aloha007 said:
This is all so amazing Syph
. Your generosity in taking us all along in this journey so unselfishly. This hinged compartment is very intriguing. Sad for Mon as he will again be sending in his TiRogue for yet another face lift :DLol, maybe someday, but it's a thicker scale, so I'm not sure.
Proud SAKMC member :)
-
Just a little one today.... Alot of Ti in this one. Liners, scales and mag glass holder. :D Noone ever wants to keep that fishscaler on a champ... :D
-
Dang,, nice!

JR -
Sweet !

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
