And so it begins.... (My adventures into Alox!)
-
I know you're not really doing 93mm mods anymore but curious if you (or any of your sources) has any interest in making custom 93mm blades? I know a few years ago you had some made with CPM-154. I've been hunting for somebody to make me an upgraded 93mm blade.
-
All this is very awesome Syph
Excited to see how this all turns out with the finished product
After you get all the fine tuning would it be to hard to get a video clip up on how this all operates

-
@Poncho65 said:
All this is very awesome Syph
Excited to see how this all turns out with the finished product
After you get all the fine tuning would it be to hard to get a video clip up on how this all operates

Absolutely. I was going to put up some more YouTube videos once I'm done. It's been along time since I put up any content. I've got a folder full of emails for people ready to order this already so I really want to make sure its perfect before I sell any.
-
@mbp said:
I know you're not really doing 93mm mods anymore but curious if you (or any of your sources) has any interest in making custom 93mm blades? I know a few years ago you had some made with CPM-154. I've been hunting for somebody to make me an upgraded 93mm blade.There are lots of people who will make custom blades. I bet you could find someone on blade forums for that type of work. Or if you want I could give you the contact details of who I used for those blades. I have 2 of those left I never used but there were very thick.
Edit: I had a dig though my emails and found his name.
Paul Cooper Email: byksm@yahoo.com
He did great work and it was obvious in communicating with him he knew what he was talking about and had no problem making different blade shapes and adding the nail nicks etc. He bought the steel and ground the blades for me. I got them heat treated. There are lots of places to do that as well.
They were great blades, and I do want to make my own someday, but I really dont have the time until I finish the other projects. Plus for an oven and grinder Id be in at least $4k and Im not ready to invest that much right now to make blades. I need a proper air compressor first and to get my blasting booth setup.


If you want the blades to fit in a standard SAK then they would need to be bent to fit around the awl, like stock blades are. Fitting these huge blades was crazy hard and I wouldnt want to do that again. :D
I want drop in replacements for the 91mm blades, thats what Id be after. In one of the new stainless super steels. At least in S35VN or better.
-
I know you're not really doing 93mm mods anymore but curious if you (or any of your sources) has any interest in making custom 93mm blades? I know a few years ago you had some made with CPM-154. I've been hunting for somebody to make me an upgraded 93mm blade.
There are lots of people who will make custom blades. I bet you could find someone on blade forums for that type of work. Or if you want I could give you the contact details of who I used for those blades. I have 2 of those left I never used but there were very thick.
Edit: I had a dig though my emails and found his name.
Paul Cooper Email: byksm@yahoo.com
He did great work and it was obvious in communicating with him he knew what he was talking about and had no problem making different blade shapes and adding the nail nicks etc. He bought the steel and ground the blades for me. I got them heat treated. There are lots of places to do that as well.
They were great blades, and I do want to make my own someday, but I really dont have the time until I finish the other projects. Plus for an oven and grinder Id be in at least $4k and Im not ready to invest that much right now to make blades. I need a proper air compressor first and to get my blasting booth setup.


If you want the blades to fit in a standard SAK then they would need to be bent to fit around the awl, like stock blades are. Fitting these huge blades was crazy hard and I wouldnt want to do that again. :D
I want drop in replacements for the 91mm blades, thats what Id be after. In one of the new stainless super steels. At least in S35VN or better.
Thank you very much for the information, I will reach out to him.. My thought (and hope) is to get an upgraded blade suitable for use with the existing blade/awl backspring... save a bit of money and energy that way. That would mean keeping the stock around the 3mm mark. Does that sound feasible?
I don't see an easy method of keeping the awl in that instance, it would just be a blade-only layer. Getting a stronger main blade in a supersteel is a worthwhile tradeoff to losing the awl IMO.
-
Do you think the swing out drawer could also be implemented in a 93mm model? Because that could make a farmer x pretty much the ultimate sak for me...

-
-
This is all so amazing Syph
. Your generosity in taking us all along in this journey so unselfishly. This hinged compartment is very intriguing. Sad for Mon as he will again be sending in his TiRogue for yet another face lift :D -
@Aloha007 said:
This is all so amazing Syph
. Your generosity in taking us all along in this journey so unselfishly. This hinged compartment is very intriguing. Sad for Mon as he will again be sending in his TiRogue for yet another face lift :DLol, maybe someday, but it's a thicker scale, so I'm not sure.
Proud SAKMC member :)
-
Just a little one today.... Alot of Ti in this one. Liners, scales and mag glass holder. :D Noone ever wants to keep that fishscaler on a champ... :D
-
Dang,, nice!

JR -
Sweet !

-
That must be a brick, lol. Very nice though

Proud SAKMC member :)
-
Scale drawer prototype 2 retention spring mechanism (SDPRSM) actually works!
I put up some Instagram video, I think it should be viewable in a browser too, I just cant embed it.
Robert Lessard on Instagram: "Scale drawer prototype 2. This one actually works! I can see a few more tweaks I want to do but next version I will build into a sak for a proper test. #victorinox #sak #swissarmyknife #customknives #Titanium #edcgear #sakmodder #metalfinish #knives #knifeporn #metal #Ti #Tormach"
225 likes, 12 comments - robertjlessard on July 19, 2017: "Scale drawer prototype 2. This one actually works! I can see a few more tweaks I want to do but next version I will build into a sak for a proper test. #victorinox #sak #swissarmyknife #customknives #Titanium #edcgear #sakmodder #metalfinish #knives #knifeporn #metal #Ti #Tormach".
Instagram (www.instagram.com)
-
Oh sweet, big enough to hold wood toothpicks?
JR -
@MadPlumbarian said:
Oh sweet, big enough to hold wood toothpicks?
JROr for sure. Right now I can fit T&T and small firesteel. The opening length is just a bit over 2 inches.
-
Oh sweet, big enough to hold wood toothpicks?
JROr for sure. Right now I can fit T&T and small firesteel. The opening length is just a bit over 2 inches.
NICE!
JR -
Oh WOW :ahhh :ahhh :ahhh That is very awesome Syph
Love the video
Thanks for that
I love how you can put whatever will fit into that little drawer

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

