I Recently Converted My Alox Mod to Torx
-
Forgot to mention that the screws I had were T6... Though some may come in T8?

Sent from my iPhone using Tapatalk
-
This probably the most unorganized and unplanned thread I have made... sigh
Sent from my iPhone using Tapatalk
-
This is helping me understand how the mod works for sure! This is somewhat unrelated to the pivots but when you put your two openers opposite the phillips what did you have to do to fit them?
-
@gdoolittle said:
This is helping me understand how the mod works for sure! This is somewhat unrelated to the pivots but when you put your two openers opposite the phillips what did you have to do to fit them?2 opener backsprings are needed... flip one so that it will fit the bottle opener on the same end as the can opener... Reshape the phillips the same as the openers and enlarge the pivot hole...

Sent from my iPhone using Tapatalk
-

Very nice tiny tiny work

-
Very cool.

You got lucky with being able to use 3mm pivots I think... :) -
Awesome! This is one of my dream mods and will hopefully be made in the future. This thread will work for reference so thank you!!
It's not failure if you learn something from it
-
@Pablo O'Brien said:
Very cool.
You got lucky with being able to use 3mm pivots I think... :)Got lucky? Why go to all the trouble of drilling out the tools to 1/8" if 3mm pivots are available?
-
@Pablo O'Brien said:
Very cool.

You got lucky with being able to use 3mm pivots I think... :)Got lucky? Why go to all the trouble of drilling out the tools to 1/8" if 3mm pivots are available?
:D
Indeed... 3mm pivots don't seem to be common. :D -
Thanks Guys

The pivots were part of a deal I had with Tattoosteve99... An awesome guy and friend... A good person to deal with...
Sent from my iPhone using Tapatalk
-
-
Awesome and timely post.
Well done - l believe your approach is the simplest l have seen.
I too want to build an Alox with this exact layout.
I've been holding off on buying the 1/8" pivots from the recommended place as they have a $US 50 minimum order (not including postage) for overseas buyers.
A few questions;
-
What is the thread size of the torx screws and where did you buy them from? Are they metric?
-
Any idea of the source of the pivots?
-
l thought l read somewhere on this site that you have to counterbore the inner surface of the scales slightly for the pivots - l believe this is so that the pivots take the load rather that the screws? Is it OK not to do this?
Cheers
George
-
-
@george1 said:
Awesome and timely post.Well done - l believe your approach is the simplest l have seen.
I too want to build an Alox with this exact layout.
I've been holding off on buying the 1/8" pivots from the recommended place as they have a $US 50 minimum order (not including postage) for overseas buyers.
A few questions;
-
What is the thread size of the torx screws and where did you buy them from? Are they metric?
-
Any idea of the source of the pivots?
-
l thought l read somewhere on this site that you have to counterbore the inner surface of the scales slightly for the pivots - l believe this is so that the pivots take the load rather that the screws? Is it OK not to do this?
Cheers
George
Hi George,
I wouldn't be able to answer no.1 as I don't know... like I mention above, I source the pivots and screws from Tattoosteve99...
I didn't counterbore the inside scale holes as all of the pivots ends goes through the scale holes... This I forgot to mention above...
Sent from my iPhone using Tapatalk
-
-
Forgot to mention that the screws I had were T6... Though some may come in T8?

I was about to ask that, thanks.

Imagine if SAKs came with torx screws. Man, the hours of fun we would have had.
That's for sure...

Sent from my iPhone using Tapatalk
-
Thanks for this thread jaya
I had always wondered about the countersinking part
A very straight forward explanation and great pics to go with it
I may try this someday if I can source the parts needed
Maybe a Farmer X with a file and an electrician blade instead of the opener
:DSome of the way the mod goes just hadn't occurred to me, thus why I wanted to see the process

Excellent thread

-
Nice reference for those looking to attempt this mod.

-
Where did you find those torx screws/pivot barrels?
Edit: just read all replies... nvm
-
Thanks Poncho and Aloha007...
:saknight:Sent from my iPhone using Tapatalk
-
Here's an illustration of how the torx and pivot looks like... at least on my mod... as the diameter of the scale pivot holes are just right for the barrels, and there is enough length for the barrel to go through the scale, counterbore wasn't required...

Maybe counterbore would be required for 1/8" barrels?
Sent from my iPhone using Tapatalk
-
Very cool thread

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login