Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

I Recently Converted My Alox Mod to Torx

Scheduled Pinned Locked Moved The Mod Squad
51 Posts 1 Posters 38.6k Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. I Recently Converted My Alox Mod to Torx
I Recently Converted My Alox Mod to Torx
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • jaya_man Offline
    jaya_man
    Global Moderators
    Posts: 9,012
    jaya_man Offline
    jaya_man
    Global Moderators
    wrote on last edited by jaya_man
    #13 Quote Reply

      Thanks Guys :cheers:

      The pivots were part of a deal I had with Tattoosteve99... An awesome guy and friend... A good person to deal with...

      Sent from my iPhone using Tapatalk

      1 Reply Last reply
      • ReamerPunch Offline
        ReamerPunch
        Global Moderators
        Posts: 12,187
        ReamerPunch Offline
        ReamerPunch
        Global Moderators
        wrote on last edited by
        #14 Quote Reply

          @jaya_man said:
          Forgot to mention that the screws I had were T6... Though some may come in T8? :facepalm:

          I was about to ask that, thanks. :tu:

          Imagine if SAKs came with torx screws. Man, the hours of fun we would have had.

          1 Reply Last reply
          • george1 Offline
            george1
            Posts: 94
            george1 Offline
            george1
            wrote on last edited by
            #15 Quote Reply

              Awesome and timely post.

              Well done - l believe your approach is the simplest l have seen.

              I too want to build an Alox with this exact layout.

              I've been holding off on buying the 1/8" pivots from the recommended place as they have a $US 50 minimum order (not including postage) for overseas buyers.

              A few questions;

              1. What is the thread size of the torx screws and where did you buy them from? Are they metric?

              2. Any idea of the source of the pivots?

              3. l thought l read somewhere on this site that you have to counterbore the inner surface of the scales slightly for the pivots - l believe this is so that the pivots take the load rather that the screws? Is it OK not to do this?

              Cheers

              George

              1 Reply Last reply
              • jaya_man Offline
                jaya_man
                Global Moderators
                Posts: 9,012
                jaya_man Offline
                jaya_man
                Global Moderators
                wrote on last edited by
                #16 Quote Reply

                  @george1 said:
                  Awesome and timely post.

                  Well done - l believe your approach is the simplest l have seen.

                  I too want to build an Alox with this exact layout.

                  I've been holding off on buying the 1/8" pivots from the recommended place as they have a $US 50 minimum order (not including postage) for overseas buyers.

                  A few questions;

                  1. What is the thread size of the torx screws and where did you buy them from? Are they metric?

                  2. Any idea of the source of the pivots?

                  3. l thought l read somewhere on this site that you have to counterbore the inner surface of the scales slightly for the pivots - l believe this is so that the pivots take the load rather that the screws? Is it OK not to do this?

                  Cheers

                  George

                  Hi George,

                  I wouldn't be able to answer no.1 as I don't know... like I mention above, I source the pivots and screws from Tattoosteve99...

                  I didn't counterbore the inside scale holes as all of the pivots ends goes through the scale holes... This I forgot to mention above...

                  Sent from my iPhone using Tapatalk

                  1 Reply Last reply
                  • jaya_man Offline
                    jaya_man
                    Global Moderators
                    Posts: 9,012
                    jaya_man Offline
                    jaya_man
                    Global Moderators
                    wrote on last edited by
                    #17 Quote Reply

                      @ReamerPunch said:

                      @jaya_man said:

                      Forgot to mention that the screws I had were T6... Though some may come in T8? :facepalm:

                      I was about to ask that, thanks. :tu:

                      Imagine if SAKs came with torx screws. Man, the hours of fun we would have had.

                      That's for sure... :cheers:

                      Sent from my iPhone using Tapatalk

                      1 Reply Last reply
                      • Poncho65 Offline
                        Poncho65
                        Global Moderators
                        Posts: 88,523
                        Poncho65 Offline
                        Poncho65
                        Global Moderators
                        wrote on last edited by
                        #18 Quote Reply

                          Thanks for this thread jaya :like: I had always wondered about the countersinking part :salute: A very straight forward explanation and great pics to go with it :cheers: I may try this someday if I can source the parts needed :like: Maybe a Farmer X with a file and an electrician blade instead of the opener :dd: :D

                          Some of the way the mod goes just hadn't occurred to me, thus why I wanted to see the process :salute:

                          Excellent thread :cheers:

                          1 Reply Last reply
                          • Aloha Offline
                            Aloha
                            Global Moderators
                            Posts: 31,235
                            Aloha Offline
                            Aloha
                            Global Moderators
                            wrote on last edited by
                            #19 Quote Reply

                              Nice reference for those looking to attempt this mod.

                              :tu:

                              1 Reply Last reply
                              • Mechanickal Offline
                                Mechanickal
                                Posts: 14,690
                                Mechanickal Offline
                                Mechanickal
                                wrote on last edited by Mechanickal
                                #20 Quote Reply

                                  Where did you find those torx screws/pivot barrels?
                                  Edit: just read all replies... nvm :facepalm:

                                  1 Reply Last reply
                                  • jaya_man Offline
                                    jaya_man
                                    Global Moderators
                                    Posts: 9,012
                                    jaya_man Offline
                                    jaya_man
                                    Global Moderators
                                    wrote on last edited by
                                    #21 Quote Reply

                                      Thanks Poncho and Aloha007... :salute: :saknight:

                                      Sent from my iPhone using Tapatalk

                                      1 Reply Last reply
                                      • jaya_man Offline
                                        jaya_man
                                        Global Moderators
                                        Posts: 9,012
                                        jaya_man Offline
                                        jaya_man
                                        Global Moderators
                                        wrote on last edited by
                                        #22 Quote Reply

                                          Here's an illustration of how the torx and pivot looks like... at least on my mod... as the diameter of the scale pivot holes are just right for the barrels, and there is enough length for the barrel to go through the scale, counterbore wasn't required...

                                          Maybe counterbore would be required for 1/8" barrels?

                                          Sent from my iPhone using Tapatalk

                                          1 Reply Last reply
                                          • zr0dfx Offline
                                            zr0dfx
                                            Posts: 273
                                            zr0dfx Offline
                                            zr0dfx
                                            wrote on last edited by
                                            #23 Quote Reply

                                              Very cool thread
                                              :like:

                                              1 Reply Last reply
                                              • jaya_man Offline
                                                jaya_man
                                                Global Moderators
                                                Posts: 9,012
                                                jaya_man Offline
                                                jaya_man
                                                Global Moderators
                                                wrote on last edited by
                                                #24 Quote Reply

                                                  @Mechanickal said:
                                                  Where did you find those torx screws/pivot barrels?
                                                  Edit: just read all replies... nvm :facepalm:

                                                  I just don't know whether Steven sells them to anyone who asks? Or mine were just extras lying around...

                                                  Sent from my iPhone using Tapatalk

                                                  1 Reply Last reply
                                                  • jaya_man Offline
                                                    jaya_man
                                                    Global Moderators
                                                    Posts: 9,012
                                                    jaya_man Offline
                                                    jaya_man
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #25 Quote Reply

                                                      @zr0dfx said:
                                                      Very cool thread
                                                      :like:

                                                      Thanks :cheers: :drink:

                                                      Sent from my iPhone using Tapatalk

                                                      1 Reply Last reply
                                                      • hiraethus Offline
                                                        hiraethus
                                                        Admin Team
                                                        Posts: 6,969
                                                        hiraethus Offline
                                                        hiraethus
                                                        Admin Team
                                                        wrote on last edited by
                                                        #26 Quote Reply

                                                          @jaya_man said:
                                                          Here's an illustration of how the torx and pivot looks like... at least on my mod... as the diameter of the scale pivot holes are just right for the barrels, and there is enough length for the barrel to go through the scale, counterbore wasn't required...

                                                          Maybe counterbore would be required for 1/8" barrels?

                                                          Sent from my iPhone using Tapatalk

                                                          Great sketch - shows the arrangement nicely. :tu:
                                                          A couple of points to add, from my experience of similar mods (using 3mm brass pivots on all three points):

                                                          1. cut the pivots as long as you possibly can. The more of the pivot that sticks into the scale the better. I assembled the knives onto longer plain rod, measured the overall thickess then subracted 2.5mm to get the final pivot length.
                                                          2. countersink the ends of the pivot barrels if you can too - this allows the pivots to be longer and have more engagement with the scales for better snap.
                                                          3. Make the countersinks in the scales as shallow as possible - again, to maximise the overlap between the pivot and the scale.

                                                          The screws I used were metric M2x0.5mm with countersunk T6 heads, but I guess the ones Steve used are imperial/standard 2-56.

                                                          1 Reply Last reply
                                                          • jaya_man Offline
                                                            jaya_man
                                                            Global Moderators
                                                            Posts: 9,012
                                                            jaya_man Offline
                                                            jaya_man
                                                            Global Moderators
                                                            wrote on last edited by
                                                            #27 Quote Reply

                                                              @hiraethus said:

                                                              @jaya_man said:

                                                              Here's an illustration of how the torx and pivot looks like... at least on my mod... as the diameter of the scale pivot holes are just right for the barrels, and there is enough length for the barrel to go through the scale, counterbore wasn't required...

                                                              Maybe counterbore would be required for 1/8" barrels?

                                                              Sent from my iPhone using Tapatalk

                                                              Great sketch - shows the arrangement nicely. :tu:
                                                              A couple of points to add, from my experience of similar mods (using 3mm brass pivots on all three points):

                                                              1. cut the pivots as long as you possibly can. The more of the pivot that sticks into the scale the better. I assembled the knives onto longer plain rod, measured the overall thickess then subracted 2.5mm to get the final pivot length.
                                                              2. countersink the ends of the pivot barrels if you can too - this allows the pivots to be longer and have more engagement with the scales for better snap.
                                                              3. Make the countersinks in the scales as shallow as possible - again, to maximise the overlap between the pivot and the scale.

                                                              The screws I used were metric M2x0.5mm with countersunk T6 heads, but I guess the ones Steve used are imperial/standard 2-56.

                                                              Ahhh... more helpful tips for me... I will need it for future mods...

                                                              Thanks H :saknight: :cheers:

                                                              Sent from my iPhone using Tapatalk

                                                              1 Reply Last reply
                                                              • AimlessWanderer Offline
                                                                AimlessWanderer
                                                                Posts: 17,518
                                                                AimlessWanderer Offline
                                                                AimlessWanderer
                                                                wrote on last edited by
                                                                #28 Quote Reply

                                                                  Great thread, and very useful :tu:

                                                                  Going back to the original motivation for a moment though, are we sure that it's the brass that's not up to the job. If the pins need repeening, they may be stretching, OR the peened heads may just be "settling" in the holes. I had this happen on one of my mods - everything was tight, but it became a little sloppy with gaps between layers without doing much work. The pins weren't stretching, but the peened heads were pulling in slightly. It may have been that when I was peening, the knife was adequately supported but not the pin itself, and this may have floated slightly when peening the second side.

                                                                  Hopefully that makes sense :think:

                                                                  1 Reply Last reply
                                                                  • jaya_man Offline
                                                                    jaya_man
                                                                    Global Moderators
                                                                    Posts: 9,012
                                                                    jaya_man Offline
                                                                    jaya_man
                                                                    Global Moderators
                                                                    wrote on last edited by
                                                                    #29 Quote Reply

                                                                      @50ft-trad said:
                                                                      Great thread, and very useful :tu:

                                                                      Going back to the original motivation for a moment though, are we sure that it's the brass that's not up to the job. If the pins need repeening, they may be stretching, OR the peened heads may just be "settling" in the holes. I had this happen on one of my mods - everything was tight, but it became a little sloppy with gaps between layers without doing much work. The pins weren't stretching, but the peened heads were pulling in slightly. It may have been that when I was peening, the knife was adequately supported but not the pin itself, and this may have floated slightly when peening the second side.

                                                                      Hopefully that makes sense :think:

                                                                      Good point... That could be the case too... I suspected that initially... I used the same type of brass pins for my other mods, and I never had to re-peen...

                                                                      The brass pin material available locally could also be different from those available overseas... The ones I have are actually brass welding rods... I once tried brass pins made in Germany... they were tougher to cut...

                                                                      Sent from my iPhone using Tapatalk

                                                                      1 Reply Last reply
                                                                      • Syph007 Offline
                                                                        Syph007
                                                                        Global Moderators
                                                                        Posts: 9,842
                                                                        Syph007 Offline
                                                                        Syph007
                                                                        Global Moderators
                                                                        wrote on last edited by
                                                                        #30 Quote Reply

                                                                          @jaya_man said:

                                                                          @50ft-trad said:

                                                                          Great thread, and very useful :tu:

                                                                          Going back to the original motivation for a moment though, are we sure that it's the brass that's not up to the job. If the pins need repeening, they may be stretching, OR the peened heads may just be "settling" in the holes. I had this happen on one of my mods - everything was tight, but it became a little sloppy with gaps between layers without doing much work. The pins weren't stretching, but the peened heads were pulling in slightly. It may have been that when I was peening, the knife was adequately supported but not the pin itself, and this may have floated slightly when peening the second side.

                                                                          Hopefully that makes sense :think:

                                                                          Good point... That could be the case too... I suspected that initially... I used the same type of brass pins for my other mods, and I never had to re-peen...

                                                                          The brass pin material available locally could also be different from those available overseas... The ones I have are actually brass welding rods... I once tried brass pins made in Germany... they were tougher to cut...

                                                                          Sent from my iPhone using Tapatalk

                                                                          I meant to talk about brass head forming practices and what Ive learned and this reminded me. In most of the tutorials people show to form the head on one end first then assemble. DONT! Put the pins in unformed and trim to length then peen both heads so they form into the space available. Think about how the space you want to fill is like a countersunk V shape and forming a mushroom head to fit that is not the best fit, and one reason rivets made this way will loosen.

                                                                          I peen all my 91mm mods this way now so the brass forms nicely into the bushings. It just takes a few taps on one end at a time, and if you have too much brass, file or grind as you work. :tu:

                                                                          1 Reply Last reply
                                                                          • Don Pablo Offline
                                                                            Don Pablo
                                                                            Posts: 15,329
                                                                            Don Pablo Offline
                                                                            Don Pablo
                                                                            wrote on last edited by
                                                                            #31 Quote Reply

                                                                              @Syph007 said:

                                                                              @jaya_man said:

                                                                              @50ft-trad said:

                                                                              Great thread, and very useful :tu:

                                                                              Going back to the original motivation for a moment though, are we sure that it's the brass that's not up to the job. If the pins need repeening, they may be stretching, OR the peened heads may just be "settling" in the holes. I had this happen on one of my mods - everything was tight, but it became a little sloppy with gaps between layers without doing much work. The pins weren't stretching, but the peened heads were pulling in slightly. It may have been that when I was peening, the knife was adequately supported but not the pin itself, and this may have floated slightly when peening the second side.

                                                                              Hopefully that makes sense :think:

                                                                              Good point... That could be the case too... I suspected that initially... I used the same type of brass pins for my other mods, and I never had to re-peen...

                                                                              The brass pin material available locally could also be different from those available overseas... The ones I have are actually brass welding rods... I once tried brass pins made in Germany... they were tougher to cut...

                                                                              Sent from my iPhone using Tapatalk

                                                                              I meant to talk about brass head forming practices and what Ive learned and this reminded me. In most of the tutorials people show to form the head on one end first then assemble. DONT! Put the pins in unformed and trim to length then peen both heads so they form into the space available. Think about how the space you want to fill is like a countersunk V shape and forming a mushroom head to fit that is not the best fit, and one reason rivets made this way will loosen.

                                                                              I peen all my 91mm mods this way now so the brass forms nicely into the bushings. It just takes a few taps on one end at a time, and if you have too much brass, file or grind as you work. :tu:

                                                                              I discovered that if you hit the Brass rod head on just right, repeatedly, the end sort of "bulges" out, increasing in diameter slightly. I think that combined with a nicely formed head, the "bulge" helps fill the brushing?

                                                                              I hear what you say about not preening until the rod is in the SAK, but I can preen my best when the rod is spinning on a drill. :think:

                                                                              1 Reply Last reply
                                                                              • jaya_man Offline
                                                                                jaya_man
                                                                                Global Moderators
                                                                                Posts: 9,012
                                                                                jaya_man Offline
                                                                                jaya_man
                                                                                Global Moderators
                                                                                wrote on last edited by
                                                                                #32 Quote Reply

                                                                                  @Pablo O'Brien said:

                                                                                  @Syph007 said:

                                                                                  @jaya_man said:

                                                                                  @50ft-trad said:

                                                                                  Great thread, and very useful :tu:

                                                                                  Going back to the original motivation for a moment though, are we sure that it's the brass that's not up to the job. If the pins need repeening, they may be stretching, OR the peened heads may just be "settling" in the holes. I had this happen on one of my mods - everything was tight, but it became a little sloppy with gaps between layers without doing much work. The pins weren't stretching, but the peened heads were pulling in slightly. It may have been that when I was peening, the knife was adequately supported but not the pin itself, and this may have floated slightly when peening the second side.

                                                                                  Hopefully that makes sense :think:

                                                                                  Good point... That could be the case too... I suspected that initially... I used the same type of brass pins for my other mods, and I never had to re-peen...

                                                                                  The brass pin material available locally could also be different from those available overseas... The ones I have are actually brass welding rods... I once tried brass pins made in Germany... they were tougher to cut...

                                                                                  Sent from my iPhone using Tapatalk

                                                                                  I meant to talk about brass head forming practices and what Ive learned and this reminded me. In most of the tutorials people show to form the head on one end first then assemble. DONT! Put the pins in unformed and trim to length then peen both heads so they form into the space available. Think about how the space you want to fill is like a countersunk V shape and forming a mushroom head to fit that is not the best fit, and one reason rivets made this way will loosen.

                                                                                  I peen all my 91mm mods this way now so the brass forms nicely into the bushings. It just takes a few taps on one end at a time, and if you have too much brass, file or grind as you work. :tu:

                                                                                  I discovered that if you hit the Brass rod head on just right, repeatedly, the end sort of "bulges" out, increasing in diameter slightly. I think that combined with a nicely formed head, the "bulge" helps fill the brushing?

                                                                                  I hear what you say about not preening until the rod is in the SAK, but I can preen my best when the rod is spinning on a drill. :think:

                                                                                  Interesting... my firsts few mods were peened they way Robert explained... It was challenging for me... a few bent pins in the process... And then I found this impact drill trick... convenient... of course it still needed a few taps here and there so that the pin head will fit nicely into the 91mm bushings... not aesthetically pleasing though... but then celidor scales will hide the ugly peen job... of course exposed pins are a different story... would have to be careful with metal scales...

                                                                                  Sent from my iPhone using Tapatalk

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. I Recently Converted My Alox Mod to Torx
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0