Shop projects
-
@Sparky415 said:
No, the 415 numbers are bigger than the first one I tried
and I think I have settled on the first design
Yes the idea is to heat it up for wood and just cold press it in to leather

I was going to ask if you wanted a diff design, but there are a few company's out there that aren't to bad on custom irons, but yeah they can get a little pricy!
JR -
Next little project (sorry not enough pictures)
I'm still packing stuff away from the meet ::)
I need to find somewhere to store these little Gaz canisters safely
I have some spare PVC about the right size and 5ft/1.5m long, bits of wood, cork, foam etc

I came up with this
It's open at the top, there's about 15 in there so far, they just pop out the bottom as you pull the strap


-
Good idea!
Long way to drop for the first ones though. -
Yep it's quite a drop,
I had a cork disk in the bottom first then changed it to some camping mat and...
now I'm inserting them from the bottom :) -
Not a prototype for a home made gas mortar then?
-
I did think that when I dropped the first one in from the top

I'm loading from the bottom now :) -
Perhaps it could tilt for safer toploading?
-
@Sparky415 said:
I did think that when I dropped the first one in from the top
I'm loading from the bottom now :)Just remember, you're only supposed blow the bloody doors off :D
-
@Sparky415 said:
Yep it's quite a drop,
I had a cork disk in the bottom first then changed it to some camping mat and...
now I'm inserting them from the bottom :)Must..........resist...........temptation.............not ....my.....job......pfrsantos...........aaaarghhhhhhhh :ahhh
-
Yep it's quite a drop,
I had a cork disk in the bottom first then changed it to some camping mat and...
now I'm inserting them from the bottom :)Must..........resist...........temptation.............not ....my.....job......pfrsantos...........aaaarghhhhhhhh :ahhh

-
Hey theres no discrimination in my garage! bottom loaders, top loaders, both end loaders all are welcome

Its the Welsh I have problems with

-
So my Mate Kev the welder says theres a weak point with these blowlamps, if you knock them over the top breaks off, :o
I knocked mine over today so I decided to make a hanger to get it up off my workbench
Old fire extinguisher ;)

Maybe smething like...

So my hoovers full of rust and aluminium dust now

That should work, need to find somewhere to hang it now, maybe it needs some paint first?


-
Nice

I didn't know fire extinguishers were so clean inside.
My family have asked me for a wish list for my birthday coming soon, one of those blowlamps is on the list.
-
Me neither, I also thought they were steel, I was going to make a cooker ::)
-
@Sparky415 said:
So my hoovers full of rust and aluminium dust now

got a good few cuts left in that disc

-
So my hoovers full of rust and aluminium dust now

got a good few cuts left in that disc

Ryan my old Mate

Tons of life left in that one :D
Incidentally Guys that ally really buggers up Jigsaw blades

-
@Sparky415 said:
So my Mate Kev the welder says theres a weak point with these blowlamps, if you knock them over the top breaks off, :oThat's a useful bit of information, thanks for that. Although I have been storing mine with the canister removed.
-
So my Mate Kev the welder says theres a weak point with these blowlamps, if you knock them over the top breaks off, :o
That's a useful bit of information, thanks for that. Although I have been storing mine with the canister removed.
I think our tools have an easier life than Kev's tools :ahhh
Luckily I have so much smurf in here it softens the fall from the bench
-
So my Mate Kev the welder says theres a weak point with these blowlamps, if you knock them over the top breaks off, :o
That's a useful bit of information, thanks for that. Although I have been storing mine with the canister removed.
I think our tools have an easier life than Kev's tools :ahhh
Luckily I have so much smurf in here it softens the fall from the bench
Lots of things for it to pinball off if you snap the top off and it sets off like a rocket then. You'll be ok as long as it doesn't hit your gas canister mortar launcher you just built
-
@Kevin Davey said:
You'll be ok as long as it doesn't hit your gas canister mortar launcher you just builtI think I might end up on a watch list :ahhh
If you are going to paint these things Guys your paint might react with the original plastic coating ::)
I've just got to find a spare bit of wall now

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login