Shop projects
-
So my hoovers full of rust and aluminium dust now

got a good few cuts left in that disc

Ryan my old Mate

Tons of life left in that one :D
Incidentally Guys that ally really buggers up Jigsaw blades

-
@Sparky415 said:
So my Mate Kev the welder says theres a weak point with these blowlamps, if you knock them over the top breaks off, :oThat's a useful bit of information, thanks for that. Although I have been storing mine with the canister removed.
-
So my Mate Kev the welder says theres a weak point with these blowlamps, if you knock them over the top breaks off, :o
That's a useful bit of information, thanks for that. Although I have been storing mine with the canister removed.
I think our tools have an easier life than Kev's tools :ahhh
Luckily I have so much smurf in here it softens the fall from the bench
-
So my Mate Kev the welder says theres a weak point with these blowlamps, if you knock them over the top breaks off, :o
That's a useful bit of information, thanks for that. Although I have been storing mine with the canister removed.
I think our tools have an easier life than Kev's tools :ahhh
Luckily I have so much smurf in here it softens the fall from the bench
Lots of things for it to pinball off if you snap the top off and it sets off like a rocket then. You'll be ok as long as it doesn't hit your gas canister mortar launcher you just built
-
@Kevin Davey said:
You'll be ok as long as it doesn't hit your gas canister mortar launcher you just builtI think I might end up on a watch list :ahhh
If you are going to paint these things Guys your paint might react with the original plastic coating ::)
I've just got to find a spare bit of wall now

-
Nice

Is that smelly tin a candidate for an alcohol burner?
-
Maybe :D :D
There was a thread about them somewhere years back but since Photobucket shafted us all I won't bother looking for it now
Anyway someone requested one ;) -
Just finished a little unique shop project, made a few more hankies but also a little something to hold them and show them off at the same time, how's this,,
I did some research to find out some people use a old school library index card drawer, which is cool but can be very expensive! I also found some unique round hanging setup, but couldn't find them anywhere. So, for the past couple days I looked around the house to see if I could come up with anything, and well, this is what I came up with, all junk just laying around,
1, a glass salad dressing bottle, needed something with a little weight to make sure it didn't go anywhere,
2, a bunch of marbles, adds a little more weight, also centers the shaft so it doesn't move,
3, a aluminum shaft, was from some old multi piece mop, cut to size,
4, a coat hanger, just the wide part, cut to length, I rolled the ends cause I was thinking of putting a diff clip on but didn't,
5, and lastly a bunch of bobbypins, they have a little larger end which fits over the coat hanger, I got a few more but no need to add any until I make more, but I might get the larger pins this way the round end slides nicely on the coat hanger, might also get some nicer marbles? I could also add another coat hanger but rather then side to side front to back, but all in time..
JR -
I am really liking the look of the repurposed fire extinguisher Sparky :o

-
Thats cool JR up out of the way and on display

Thanks Poncho

-
@Sparky415 said:
Thats cool JR up out of the way and on display
Thanks Poncho

Thanks, I fig yeah they could go in the dresser, but then you don't get to see them, then the index card storage, but then again, you really don't see them, well maybe if you just use the drawer, but again just the top part? So I saw that other round top with clips, and I did find them for sale yet their like $60 and up, and well this cost me $0! Works for me! And if I make more they'll fit, if need be I can put another hanger front to back, or just make another..
JR -
I want one JR
today I started the long awaited handles for the MOD type knife :D



-
I want one JR
today I started the long awaited handles for the MOD type knife :DYeah yeah, like I said it's more of a hobby, I ain't great besides if you were a state over and not an ocean! Here's the ones I've done.
JR:D

-
So......um..... that little kiridashi thingy..... sharp?


Looks like you've been having fun Mate

-
@Sparky415 said:
So......um..... that little kiridashi thingy..... sharp?

Looks like you've been having fun Mate

Yes Tony ,but I did it on a sharp bit of wood on my workbench

-
:D
-
Machined a small pen on the lathe.

-
Wow, I can't imagine the hours of work that went in to that

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
