Back to (Mora) basics
-
yup, we're a bunch of enablers. and in 144 posts you'll see the biggest enabler of 'em all :punishmentchicken:
-
My first Mora, finally! [emoji16][emoji106]
2017 511 Carbon for only $11!


-
Congrats
-
Enjoy.......you got the
first
part spot-on!
Like Nutnfancy said about Mora: "Buy 10, or if you don't buy 10 buy 6 at least"......or almost like that

-
@an0nemus said:
This is actually cheaper than SAKs so this should be easier to collect :D
I have several......

The only ones I use are the Bushcraft Black and the 511 that lives in my car.
The ONLY rip-off Mora I own is the black blade Companion special edition, it was about 3 or 4 times as much as a bog standard Companion, but nobody had a gun to my head when I bought it!

Locally, I can get 3 or 4 Companions or the utility range for the same price as the Victorinox Farmer (.....that I so badly want
)I would've liked to complete my Companion collection, I'm only missing 3 or 4 I believe..... (MORA COMPANION F RESCUE, MORA COMPANION FF, MORA COMPANION HD ORANGE)
Same for the utility range, I'm missing several (MORA PRECISION, MORA CHISEL etc)
-
@Gerhard Gerber said:
This is actually cheaper than SAKs so this should be easier to collect :D

I have several......

The only ones I use are the Bushcraft Black and the 511 that lives in my car.
The ONLY rip-off Mora I own is the black blade Companion special edition, it was about 3 or 4 times as much as a bog standard Companion, but nobody had a gun to my head when I bought it!

Locally, I can get 3 or 4 Companions or the utility range for the same price as the Victorinox Farmer (.....that I so badly want
)I would've liked to complete my Companion collection, I'm only missing 3 or 4 I believe..... (MORA COMPANION F RESCUE, MORA COMPANION FF, MORA COMPANION HD ORANGE)
Same for the utility range, I'm missing several (MORA PRECISION, MORA CHISEL etc)
Oh, no. I think I'm seeing my own future in your post

-
Once one has engaged in satisfying the Mora or SAK addiction, it's rarely necessary to buy another. But it's also rarely *not necessary *either!
-
@fivesense said:
Once one has engaged in satisfying the Mora or SAK addiction, it's rarely necessary to buy another. But it's also rarely *not necessary *either!I...am...still....trying....to.....resist........

-
give in. better for your nerves
-
@styx said:
Yep. I know some mod it with 2 extra holes to put a 15° angle (those are all per side). You'll have to freehand a Mora though or put a microbevel. SAK steel is easy to reprofile and sharpen so it is very forgiving to experiment with. As is Opinel.I started with a Spyderco Sharpmaker and it was no issue. Now out of pure laziness I'll just hold the rods in hand. So ceramic works, just a bit slower. But it lasts longer since you can clean it. Another benefit of ceramic rods is that you can also sharpen scissors and tools a lot easier
I'm seriously thinking of getting that Lanskys primarily for my SAKs and the 511. As it only comes with two coarse rods, what am I giving up by not having two fine rods?
-
Yep. I know some mod it with 2 extra holes to put a 15° angle (those are all per side). You'll have to freehand a Mora though or put a microbevel. SAK steel is easy to reprofile and sharpen so it is very forgiving to experiment with. As is Opinel.
I started with a Spyderco Sharpmaker and it was no issue. Now out of pure laziness I'll just hold the rods in hand. So ceramic works, just a bit slower. But it lasts longer since you can clean it. Another benefit of ceramic rods is that you can also sharpen scissors and tools a lot easier
I'm seriously thinking of getting that Lanskys primarily for my SAKs and the 511. As it only comes with two coarse rods, what am I giving up by not having two fine rods?
I think it depends mostly on your skill and dexterity. You should be fine if you are meticulous with your sharpening.
-
Yep. I know some mod it with 2 extra holes to put a 15° angle (those are all per side). You'll have to freehand a Mora though or put a microbevel. SAK steel is easy to reprofile and sharpen so it is very forgiving to experiment with. As is Opinel.
I started with a Spyderco Sharpmaker and it was no issue. Now out of pure laziness I'll just hold the rods in hand. So ceramic works, just a bit slower. But it lasts longer since you can clean it. Another benefit of ceramic rods is that you can also sharpen scissors and tools a lot easier
I'm seriously thinking of getting that Lanskys primarily for my SAKs and the 511. As it only comes with two coarse rods, what am I giving up by not having two fine rods?
I think it depends mostly on your skill and dexterity. You should be fine if you are meticulous with your sharpening.
Im a total newbie with 0 experience in sharpening. One of my SAKs wasn't even able to cut a paracord yesterday. And I also want to maintain my 511's sharpness.
The guy selling the Lansky is giving me a deep discount. But since it only has two medium rods, will these suffice if I just want to sharpen my knives? ???
-
Medium rods leave a finish that is suitable for kitchen duties and a lot of other tasks. They don't push cut as well.
Now a word of caution when it comes to Mora knives and sharpeners with strict angles. Mora knives usually come with an 11 degree per side angle while most set sharpeners go only as low as 15. Lansky I think has 20 and 25 settings. So you would be effectively creating a microbevel and not addressing the whole bevel (from the shoulder to the edge).
The rods themselves can be used for freehand sharpening but that can become a bit hazardous. Still excellent things to have since they can also sharpen tools like wire cutters.A Lansky turnbox can be modified to have the appropriate angle (you need to drill the holes yourself). The more difficult route would be to go freehand from the get go and learn from your mistakes. There are some very good combination waterstones that are 250 on one side and 1000 grit on the other. The 250 side can vary from 220 to 280. King makes an excellent one, when I remember some other brands you could look at I'll update this.
After that stone a single 6000 or a combination 4000/8000 could cover all your needs and desires.Now as a side note, the average medium ceramic is about as coarse as the average 600 grit stone. Fine ceramic is about equal to 1000 grit. Ultra fine is between 3000 and 4000.
Not sure how Fallkniven stacks up, but another option, although small is DC4. -
@styx said:
Medium rods leave a finish that is suitable for kitchen duties and a lot of other tasks. They don't push cut as well.Now a word of caution when it comes to Mora knives and sharpeners with strict angles. Mora knives usually come with an 11 degree per side angle while most set sharpeners go only as low as 15. Lansky I think has 20 and 25 settings. So you would be effectively creating a microbevel and not addressing the whole bevel (from the shoulder to the edge).
The rods themselves can be used for freehand sharpening but that can become a bit hazardous. Still excellent things to have since they can also sharpen tools like wire cutters.A Lansky turnbox can be modified to have the appropriate angle (you need to drill the holes yourself). The more difficult route would be to go freehand from the get go and learn from your mistakes. There are some very good combination waterstones that are 250 on one side and 1000 grit on the other. The 250 side can vary from 220 to 280. King makes an excellent one, when I remember some other brands you could look at I'll update this.
After that stone a single 6000 or a combination 4000/8000 could cover all your needs and desires.Now as a side note, the average medium ceramic is about as coarse as the average 600 grit stone. Fine ceramic is about equal to 1000 grit. Ultra fine is between 3000 and 4000.
Not sure how Fallkniven stacks up, but another option, although small is DC4.thank you, styx. each and every paragraph provides useful insights. i review this thread regularly when i have question about sharpening. I wont be buying that Lansksy 2-rod anymore (also not advised by jaya_man).
much appreciated!
-
Suehiro also makes a pretty good 280/1000 water stone.
The low grit is for serious damage, the higher can get anything properly sharp.
There are also very high grade companies that make similar stones but they cost about 3 times as much hence me not mentioning them.
Fallkniven's diamond is 25 microns so that is close to a 400 grit stone. The dark ceramic side is 1 micron (according to their website) which is about 6000 and is the white on the CC4 is 0.1 micron it is finer than a 30000 grit stone. Big caveat to this is that many people say their site is wrong and that the dark ceramic side is closer to a 1000 to 1200 stone while the white ceramic is about 4000 to 5000.Personally can't comment on 'em since I don't own them.
Do note that Fallkniven makes a larger benchstone DC5.Diamond stones aren't a bad way to go, but they are more aggressive and I think more expensive. Some masters of craft like Paul Sellers swear by them (woodworker)
-
@styx said:
Suehiro also makes a pretty good 280/1000 water stone.The low grit is for serious damage, the higher can get anything properly sharp.
There are also very high grade companies that make similar stones but they cost about 3 times as much hence me not mentioning them.
Fallkniven's diamond is 25 microns so that is close to a 400 grit stone. The dark ceramic side is 1 micron (according to their website) which is about 6000 and is the white on the CC4 is 0.1 micron it is finer than a 30000 grit stone. Big caveat to this is that many people say their site is wrong and that the dark ceramic side is closer to a 1000 to 1200 stone while the white ceramic is about 4000 to 5000.Personally can't comment on 'em since I don't own them.
Do note that Fallkniven makes a larger benchstone DC5.Diamond stones aren't a bad way to go, but they are more aggressive and I think more expensive. Some masters of craft like Paul Sellers swear by them (woodworker)
Frankly I don't see myself diving deep into sharpening as I'll drown with all the nitty gritty details (pun intended [emoji4])
Budget and interest limit me to the 4-rod Lansky turnbox system at $20++ that I'll save up for. I'm hoping this will be enough for my meager needs.
I'm concerned though about investing more in Moras if they're mostly 11 degrees in angle and I have to free hand them...
-
Well you can work around it. Since Moras have a nice big bevel, you could put a rod in the 25° setting and tilt your Mora so the bevel if flat on the rod. That way you're not hitting 25° but rather 11°. If you're not in a hurry, I can take some pics later using the Sharpmaker to show you what I mean
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
