Back to (Mora) basics
-
@styx said:
Car windows work more like your average butcher's steel (the kitchen rod thing most knife sets come with) as in they realign the edge.In you're strapped for cash, there are some good inexpensive double sided stones that will get most of your needs covered. Especially if you're not going for high polish, slicing very thin paper. A 220 to 250 grit on one side and 1000 on the other is what most people can live with, but don't worry if it's a 400/1000 combined. King, Norton India stones and just about anything with crystolon will work very well and won't break the bank. There are higher end brands which have amazing stones but they also cost more. Alternatively you can use sandpaper.
In my experience, Mora with their factory scandi will work great on meat and peeling, Opinel's thin flat grind is great for slicing potatoes, cucumbers, carrots and similar things if they are thicker and you don't want them breaking. Just one thing to note with the Opinel - the wood handle can soak water and get difficult to open the knife
Thanks, styx. Informative, as usual. This one is common and inexpensive here. Would this suffice? Even for my SAKs?

-
Yep. I know some mod it with 2 extra holes to put a 15° angle (those are all per side). You'll have to freehand a Mora though or put a microbevel. SAK steel is easy to reprofile and sharpen so it is very forgiving to experiment with. As is Opinel.
I started with a Spyderco Sharpmaker and it was no issue. Now out of pure laziness I'll just hold the rods in hand. So ceramic works, just a bit slower. But it lasts longer since you can clean it. Another benefit of ceramic rods is that you can also sharpen scissors and tools a lot easier
-
Thanks, styx. It narrows down my options a lot and now I now what to get. And I like the fact that I can use the Lansky for other tools in the house [emoji106]
-
Your dykes will never cut better. Only now you don't have an excuse to throw out some tools and get new ones
-
yup, we're a bunch of enablers. and in 144 posts you'll see the biggest enabler of 'em all :punishmentchicken:
-
My first Mora, finally! [emoji16][emoji106]
2017 511 Carbon for only $11!


-
Congrats
-
Enjoy.......you got the
first
part spot-on!
Like Nutnfancy said about Mora: "Buy 10, or if you don't buy 10 buy 6 at least"......or almost like that

-
@an0nemus said:
This is actually cheaper than SAKs so this should be easier to collect :D
I have several......

The only ones I use are the Bushcraft Black and the 511 that lives in my car.
The ONLY rip-off Mora I own is the black blade Companion special edition, it was about 3 or 4 times as much as a bog standard Companion, but nobody had a gun to my head when I bought it!

Locally, I can get 3 or 4 Companions or the utility range for the same price as the Victorinox Farmer (.....that I so badly want
)I would've liked to complete my Companion collection, I'm only missing 3 or 4 I believe..... (MORA COMPANION F RESCUE, MORA COMPANION FF, MORA COMPANION HD ORANGE)
Same for the utility range, I'm missing several (MORA PRECISION, MORA CHISEL etc)
-
@Gerhard Gerber said:
This is actually cheaper than SAKs so this should be easier to collect :D

I have several......

The only ones I use are the Bushcraft Black and the 511 that lives in my car.
The ONLY rip-off Mora I own is the black blade Companion special edition, it was about 3 or 4 times as much as a bog standard Companion, but nobody had a gun to my head when I bought it!

Locally, I can get 3 or 4 Companions or the utility range for the same price as the Victorinox Farmer (.....that I so badly want
)I would've liked to complete my Companion collection, I'm only missing 3 or 4 I believe..... (MORA COMPANION F RESCUE, MORA COMPANION FF, MORA COMPANION HD ORANGE)
Same for the utility range, I'm missing several (MORA PRECISION, MORA CHISEL etc)
Oh, no. I think I'm seeing my own future in your post

-
Once one has engaged in satisfying the Mora or SAK addiction, it's rarely necessary to buy another. But it's also rarely *not necessary *either!
-
@fivesense said:
Once one has engaged in satisfying the Mora or SAK addiction, it's rarely necessary to buy another. But it's also rarely *not necessary *either!I...am...still....trying....to.....resist........

-
give in. better for your nerves
-
@styx said:
Yep. I know some mod it with 2 extra holes to put a 15° angle (those are all per side). You'll have to freehand a Mora though or put a microbevel. SAK steel is easy to reprofile and sharpen so it is very forgiving to experiment with. As is Opinel.I started with a Spyderco Sharpmaker and it was no issue. Now out of pure laziness I'll just hold the rods in hand. So ceramic works, just a bit slower. But it lasts longer since you can clean it. Another benefit of ceramic rods is that you can also sharpen scissors and tools a lot easier
I'm seriously thinking of getting that Lanskys primarily for my SAKs and the 511. As it only comes with two coarse rods, what am I giving up by not having two fine rods?
-
Yep. I know some mod it with 2 extra holes to put a 15° angle (those are all per side). You'll have to freehand a Mora though or put a microbevel. SAK steel is easy to reprofile and sharpen so it is very forgiving to experiment with. As is Opinel.
I started with a Spyderco Sharpmaker and it was no issue. Now out of pure laziness I'll just hold the rods in hand. So ceramic works, just a bit slower. But it lasts longer since you can clean it. Another benefit of ceramic rods is that you can also sharpen scissors and tools a lot easier
I'm seriously thinking of getting that Lanskys primarily for my SAKs and the 511. As it only comes with two coarse rods, what am I giving up by not having two fine rods?
I think it depends mostly on your skill and dexterity. You should be fine if you are meticulous with your sharpening.
-
Yep. I know some mod it with 2 extra holes to put a 15° angle (those are all per side). You'll have to freehand a Mora though or put a microbevel. SAK steel is easy to reprofile and sharpen so it is very forgiving to experiment with. As is Opinel.
I started with a Spyderco Sharpmaker and it was no issue. Now out of pure laziness I'll just hold the rods in hand. So ceramic works, just a bit slower. But it lasts longer since you can clean it. Another benefit of ceramic rods is that you can also sharpen scissors and tools a lot easier
I'm seriously thinking of getting that Lanskys primarily for my SAKs and the 511. As it only comes with two coarse rods, what am I giving up by not having two fine rods?
I think it depends mostly on your skill and dexterity. You should be fine if you are meticulous with your sharpening.
Im a total newbie with 0 experience in sharpening. One of my SAKs wasn't even able to cut a paracord yesterday. And I also want to maintain my 511's sharpness.
The guy selling the Lansky is giving me a deep discount. But since it only has two medium rods, will these suffice if I just want to sharpen my knives? ???
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

