Kick, Fuse, Blast & Core Owners group club.
-
The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types

The saw in that series is also my personal favorite :D I use it with one handle open and it makes for a better handle and gets it out of the way at the same time

When I was first looking to replace my PST the Blast beat out the Wave when I was looking :o still ended up with a Wave later but except for the SE blade the tool compliment is very similar
I guess the Blast is also my favorite out of the 4 as well 
-
@Poncho65 said:
The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types
Agreed
although I do prefer the less splayed handle position of the older heads@Poncho65 said:
The saw in that series is also my personal favorite :D I use it with one handle open and it makes for a better handle and gets it out of the way at the same time
Not tried that, although I try not to put load on the plier end pivots unless using the pliers. I just feel happier that I'm not putting additional load/wear in that area, and I think the tool feels more stable/robust with the handles closed. Just personal taste

@Poncho65 said:
When I was first looking to replace my PST the Blast beat out the Wave when I was looking :o still ended up with a Wave later but except for the SE blade the tool compliment is very similar
I guess the Blast is also my favorite out of the 4 as well 
I started off with the Suspension, then the Swisstool, so the outboard aspects of the Wave's cutting edges (the third tool I tried) were a key deciding factor for me. I think the first fully inboard tool I tried was the Pulse, and I got rid of that pretty quickly. The leap to fully inbound, plus the dorky rocker locks was too much "wrong" for me to absorb :D It was some time later when I tried the Zytel's.
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Why not?It's not like it's adding weight.
-
@50ft-trad said:
**The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types **

Agreed
although I do prefer the less splayed handle position of the older headsWhy? :)
I can think of several main plier head types on LM tools off the side of my head.
The original PST head, also found on the Mini-tool, etc.
Also the type that was introduced along with the Zytel line and the original wave, charge etc, that you mentioned, in a few variations(the grind on the Kick, for example).
And the type on the Rebar with replaceable cutters, also the new charge head, new wave head, and the ST300 and MUT type. Not to mention the type on the budget models. And I probably forgot a few! :ahhhI don't have any experience with any of these besides the type on the Kick, so which are every bodies favorite type and why?

-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Poncho65 link=topic=59329.msg1550894#msg1550894 date=1504878759]
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Why not?It's not like it's adding weight.
[/quote]
Can't argue with that. :DAnother thing that could break?
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Pablo O'Brien link=topic=59329.msg1550897#msg1550897 date=1504878819]
[quote author=Poncho65 link=topic=59329.msg1550894#msg1550894 date=1504878759]
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Why not?It's not like it's adding weight.
[/quote]
Can't argue with that. :DAnother thing that could break?
[/quote]In the hands of Pablo The Destroyer?Yes...
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Mechanickal link=topic=59329.msg1550899#msg1550899 date=1504879093]
[quote author=Pablo O'Brien link=topic=59329.msg1550897#msg1550897 date=1504878819]
[quote author=Poncho65 link=topic=59329.msg1550894#msg1550894 date=1504878759]
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Why not?It's not like it's adding weight.
[/quote]
Can't argue with that. :DAnother thing that could break?
[/quote]In the hands of Pablo The Destroyer?Yes...
[/quote]
Thats why the Kick is good for me. :D
Less stuff to break.
-
@Pablo O'Brien said:
@50ft-trad said:
**The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types **

Agreed
although I do prefer the less splayed handle position of the older headsWhy? :)
I can think of several main plier head types on LM tools off the side of my head.
The original PST head, also found on the Mini-tool, etc.
Also the type that was introduced along with the Zytel line and the original wave, charge etc, that you mentioned, in a few variations(the grind on the Kick, for example).
And the type on the Rebar with replaceable cutters, also the new charge head, new wave head, and the ST300 and MUT type. Not to mention the type on the budget models. And I probably forgot a few! :ahhhI don't have any experience with any of these besides the type on the Kick, so which are every bodies favorite type and why?

I prefer these because at the time they came out they were the strongest type out for this size tool in LM line and I have used them a lot
I have never felt as though I was going to break them
The ones that come on the PST are strong enough I am sure but putting them side by side with these I would go with these
The cutting edge for the wire cutters is also very good size and cut very well with the oval design of the head
Plus it is also personal preference :D The replaceable cutters are fine but I would rather have this type
I know I use a Rebar and others with replaceable cutters but if I had to cut wire more at work them I would go with the non replaceable pliers heads 
Now if we are talking g the bigger tools then I think one of my favs is the one on the OG Supertool and the ST 200 as it is a great pliers head as well
then a tie between the Core/OG Surge and Supertool 300/New Surge pliers head 
I know that doesn't seem to make sense but that's the way it is for me :D
Plus I don't like to make sense somtimes

-
@Pablo O'Brien said:
@50ft-trad said:
**The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types **

Agreed
although I do prefer the less splayed handle position of the older headsWhy? :)
I can think of several main plier head types on LM tools off the side of my head.
The original PST head, also found on the Mini-tool, etc.
Also the type that was introduced along with the Zytel line and the original wave, charge etc, that you mentioned, in a few variations(the grind on the Kick, for example).
And the type on the Rebar with replaceable cutters, also the new charge head, new wave head, and the ST300 and MUT type. Not to mention the type on the budget models. And I probably forgot a few! :ahhhI don't have any experience with any of these besides the type on the Kick, so which are every bodies favorite type and why?

The Fuse/Wave head is more robust than the PST (and friends) in my mind. I don't mind the one on the Sideclip, which is the only vintage LM I carry, but the Fuse/Wave type fills me with more confidence. The cutters work very well too. The main gripping area isn't ideal (compared to pliers on other manufacturers tools) due to being an interrupted radius, but that;s an issue throughout the LM timeline.
The abomination on the Rebar (and friends) is pug ugly, impedes the main gripping area even worse than the integrated cutter type, has an inferior cutting geometry so greater force is needed, and increases handle splay ever further. No thanks, not for me.
-
I k ow what you mean. When I had a Sideclip I felt like if I squeezed the tool with all my force (never did) I could snap the handle.
I remember there was a discussion (with myself) about this years ago. I mentioned this about the Wingman and a member offered to buy me a new one if I could snap the handle. Never did try but I always wanted to. Still do. :D
-
It sounds like I was lucky finding the Kick at the car boot sale, nevermind the price.
It appears to be the best LM to get if you want the slimmest and lightest model with the Fuse/Wave plier head style.
I'd consider the Kick better than the PST for that reason, and the Mini(! :ahhh ) tool is it's equal solely because of it's super compact size.
@captain spaulding said:
I k ow what you mean. When I had a Sideclip I felt like if I squeezed the tool with all my force (never did) I could snap the handle.I remember there was a discussion (with myself) about this years ago. I mentioned this about the Wingman and a member offered to buy me a new one if I could snap the handle. Never did try but I always wanted to. Still do. :D
I think that flexing handles are better than stiff handles, strength and everything else being equal.

With the flexing handles, you get feedback telling you to back off or else break the tool, a good thing for Pablo the Tool Destroyer. :ahhh
-
@captain spaulding said:
I k ow what you mean. When I had a Sideclip I felt like if I squeezed the tool with all my force (never did) I could snap the handle.I remember there was a discussion (with myself) about this years ago. I mentioned this about the Wingman and a member offered to buy me a new one if I could snap the handle. Never did try but I always wanted to. Still do. :D
Thanks Cap'n, I'd typed Sidekick instead of Sideclip, and only noticed after your post. Sorry if I confused anyone. Now corrected

-
@Pablo O'Brien said:
It sounds like I was lucky finding the Kick at the car boot sale, nevermind the price.
It appears to be the best LM to get if you want the slimmest and lightest model with the Fuse/Wave plier head style.
I'd consider the Kick better than the PST for that reason, and the Mini(! :ahhh ) tool is it's equal solely because of it's super compact size.
@captain spaulding said:
I k ow what you mean. When I had a Sideclip I felt like if I squeezed the tool with all my force (never did) I could snap the handle.
I remember there was a discussion (with myself) about this years ago. I mentioned this about the Wingman and a member offered to buy me a new one if I could snap the handle. Never did try but I always wanted to. Still do. :D
I think that flexing handles are better than stiff handles, strength and everything else being equal.

With the flexing handles, you get feedback telling you to back off or else break the tool, a good thing for Pablo the Tool Destroyer. :ahhh
I think flexing handles are better when cutting wire too. They seem to take some of the jolt out of it, and lead to less hand fatigue.
-
Camo Blast on LMF Mora mods


-
Nice one Steve!

-
Thanks Vman !

-
Very nice Steve

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

