Any love for the Craftsman?
-
@Pablo O'Brien said:
The Craftsman, Master Craftsman, Handyman and Delemont S557 are my favorite Vic tools, though I would like it if Victorinox came up with a Handyman without scissors and instead the Magnifying glass + inline Philips screwdriver. And of course with the Delemont-line locks for the screwdrivers. Probably I would go nuts with such a model and would buy 10 pieces right away.
In an urban environment I opt for the (Master) Craftsman because of its Philips screwdriver. It still can be pocket carried and in an urban environment there are more screws to fasten than there are bottle to be uncorked. Even for self defense purposes the back Philips can be a formidable effective attachment.
However in any outdoor survival happening I would choose the Handyman because when you're on foot in the woods a corkscrew has much more utility!Recently I bought this 2nd hand Craftsman for only € 10. Is had very abused scales, because it was used as a hammer (who on earth is using pocket knives as hammers??
) All tools were in excellent condition.
So I cleaned it a little bit and put brand new scales on it (only € 1.99). Total costs € 11.99 !!If you ever walked outdoors (and even indoors!) with an outward bent shoe lace hook on your boot, you would be desperate for the pliers!
Where did you get €2 euro scales? :)
That!
Is a good question...
-
91mm and 91mm SwissChamp scales for € 1.99.
58mm scales for € 1.49.
Needle is € 0.15 and cord € 0.50.
You can buy it at: taschenmesser-onlineshop.de
They have great service! -
Ships to the likes of Belgium and Germany, but not UK or Ireland. :(
-
@Pablo O'Brien said:
Ships to the likes of Belgium and Germany, but not UK or Ireland. :(
Really?
Oh boy oh boy!Lol.

-
@Poncho65 said:
If I had one I would talk about it :D They are a great SAK and the older version is the fraternal twin brother to the Ranger
one with corkscrew other with Phillips
I always have a MT with a Phillips driver or at least always have my Gerber Shard so the Phillips thing isn't as big of a deal and that is why I am content with the Ranger I guess 
I think you mean the Master Craftsman?
Sent from my iPhone using Tapatalk
-
I was a long time user of the Handyman... It is my very first real SAK. Wish I had the Craftsman then... prefer the phillips over the corks screw... It is a thick sak with 6 layers... So I don't carry it in my person... it stayed in my bag...
The backside phillips came in handy many times... except that it always folded on me during heavy torque action... Pliers was of no help except being an oversized tweezer...
Then I found the Explorer... went to the dark side when I discovered I could make a Yeoman...

Sent from my iPhone using Tapatalk
-
@Tired_Yeti said:
While the Craftsman does not have every SAK tool in it. All the tools in the Craftsman are useful and logical. It makes sense to me!The perpendicular #2 Phillips is plenty useful. I've used it a lot. I truly think far more people fuss about the handle being in the way and not being able to turn the screw than there are people who have actually struggled with this issue.
In my experience so far, pretty much anywhere I can use a short #2, I have been able to use the SAK.


Sent from my iPhone using Tapatalk
The Craftsman is a great sak, but not for pocket carry, which is the way i carry all of mine most of the time. That's why i gave it's brother (Handyman) away, didn't use it.
As for the backside Phillips, i stopped trusting it as a reliable all around SD, for nothing more than low/very low torque use, a long time ago. Never had much of a problem with it's actual placement for usage, yes it's not ideal but nothing on a sak is "ideal", that's the whole point, Sak's are not meant to replace tools, it's meant to be something small and light you carry in your pocket that, apart from being a pocket knife, has tools that can help you save the day in a pinch and you have nothing else near suitable available to you, not to be confused with "just something you use when ever you need tools..."

My problem with the backside Phillips actual usage is it's sturdiness and mounting, the driver itself is a great driver, the way it's mounted on the Sak (for the kind of stress it endures during usage) it's not. I bent the pin and liner on my first supertinker just with medium torque taking some screws of the backplate of a desktop PC tower tha wasn't even that tight...

So even if i still love the whole Tinker line, it's not for the Phillips terrible great usage, other than occasional very light torque situations, i just love it be cause it looks good there and it makes the Sak feel and look sleeker

But than again i love the look of the CS equally, so...
:ahhh
:D -
So far, it seems the chief complaint against the Craftsman design is the perpendicular Phillips's inability to tolerate torque. I agree. As I mentioned in another post, I don't consider this SAK as a replacement for a set of dedicated tools.
My argument for the Craftsman is:
- It has a set of recognizable, very useful tools. No unfamiliar or confusing orange peelers or fish scalers or other odd tools. Every tool onboard has familiar applications and are miniature versions of tools commonly used daily. The only tools I'd like to have that aren't in there is the pen and, maybe, the magnifier.
- While the perpendicular Phillips can't take much torque, neither can the corkscrew. In general, the Phillips is more commonly necessary and useful than a corkscrew for most people.
So, yes, that's a small dig against the Handyman...but, that's why I chose the Craftsman.
The corkscrew hates torque

All other comparisons seems to be against either larger SAKs with more layers or smaller SAKs with fewer tools. For this layer count, I don't know of a SAK with a better tool layout.
Sent from my iPhone using Tapatalk
-
It's all subjective, but I'd rather have the inline Phillips(which can take lots of torque) with a useless corkscrew, than the backside Phillips and a layer less.

-
@Tired_Yeti said:
So far, it seems the chief complaint against the Craftsman design is the perpendicular Phillips's inability to tolerate torque. I agree. As I mentioned in another post, I don't consider this SAK as a replacement for a set of dedicated tools.My argument for the Craftsman is:
- It has a set of recognizable, very useful tools. No unfamiliar or confusing orange peelers or fish scalers or other odd tools. Every tool onboard has familiar applications and are miniature versions of tools commonly used daily. The only tools I'd like to have that aren't in there is the pen and, maybe, the magnifier.
- While the perpendicular Phillips can't take much torque, neither can the corkscrew. In general, the Phillips is more commonly necessary and useful than a corkscrew for most people.
So, yes, that's a small dig against the Handyman...but, that's why I chose the Craftsman.
The corkscrew hates torque

All other comparisons seems to be against either larger SAKs with more layers or smaller SAKs with fewer tools. For this layer count, I don't know of a SAK with a better tool layout.
Sent from my iPhone using Tapatalk
How did that happen???
Obviously not opening a bottle of wine...
-
@El Corkscrew said:
So far, it seems the chief complaint against the Craftsman design is the perpendicular Phillips's inability to tolerate torque. I agree. As I mentioned in another post, I don't consider this SAK as a replacement for a set of dedicated tools.
My argument for the Craftsman is:
- It has a set of recognizable, very useful tools. No unfamiliar or confusing orange peelers or fish scalers or other odd tools. Every tool onboard has familiar applications and are miniature versions of tools commonly used daily. The only tools I'd like to have that aren't in there is the pen and, maybe, the magnifier.
- While the perpendicular Phillips can't take much torque, neither can the corkscrew. In general, the Phillips is more commonly necessary and useful than a corkscrew for most people.
So, yes, that's a small dig against the Handyman...but, that's why I chose the Craftsman.
The corkscrew hates torque

All other comparisons seems to be against either larger SAKs with more layers or smaller SAKs with fewer tools. For this layer count, I don't know of a SAK with a better tool layout.
Sent from my iPhone using Tapatalk
How did that happen???
Obviously not opening a bottle of wine...
Unless the bottle was the wrong way up :P :D
-
If I had one I would talk about it :D They are a great SAK and the older version is the fraternal twin brother to the Ranger
one with corkscrew other with Phillips
I always have a MT with a Phillips driver or at least always have my Gerber Shard so the Phillips thing isn't as big of a deal and that is why I am content with the Ranger I guess 
**I think you mean the Master Craftsman? **
Hmmm ........ ??? ........ That's what he said ........

If I had one I would talk about it -They are a great SAK and the older version is the ***fraternal twin brother to the Ranger ***- one with corkscrew other with Phillips - I always have a MT with a Phillips driver or at least always have my Gerber Shard so the Phillips thing isn't as big of a deal and that is why I am content with the Ranger I guess
Hmmm Poncho - Not sure about *twin brother *- You are not confusing your Master Craftsman with your Craftsman are you
;)
I think it is the Ranger's *bigger cousin *!!
Although I never understood how the Master could be the smaller one !!! -
@El Corkscrew said:
The corkscrew hates torque

Sent from my iPhone using TapatalkHow did that happen???
Obviously not opening a bottle of wine...
Of course not, but that question opens the whole can of worms on the obsolescence of the corkscrew or it being a one-trick-pony tool that's useless for anything else.
I rarely drink any alcohol, wine included. So having a corkscrew on a SAK is very much outside my needs. On the rare occasion that a bottle of wine hits the table at Christmas, there's a dedicated corkscrew for that.
I do have a set of mini screwdrivers on my work bench. Still, I could see having one for eye glass repair in a FAK, and for that I'd consider having a SAK with a corkscrew in the FAK (merely to hold the mini screwdriver).
I do agree that the perpendicular screwdriver can't take high torque. I've used it several times. I wouldn't say it can't take ANY torque, though. I guess I'm curious as to what application you guys are putting it to that is so heavy duty that the driver fails. It's not an impact wrench. I'm not sure we should expect it or any SAK tool to tolerate extreme torque.
Oh, BTW, I was using it in conjunction with other tools to try to open a locked door.
Sent from my iPhone using Tapatalk
-
I've noticed that the back side Philips screwdriver seems to be disappearing from the lineup. Also, do you think that the appearance of the pliers in the mid 80s had anything to do with the appearance of the Leatherman tool? I have both the Craftsman and the Ranger and love them both. If I had to pick just one SAK, though, it would probably be the Craftsman. To me, it's every thing I need in a SAK with none of the excess. Just my .02 on the subject.
-
@Barry Rowland said:
I've noticed that the back side Philips screwdriver seems to be disappearing from the lineup. Also, do you think that the appearance of the pliers in the mid 80s had anything to do with the appearance of the Leatherman tool? I have both the Craftsman and the Ranger and love them both. If I had to pick just one SAK, though, it would probably be the Craftsman. To me, it's every thing I need in a SAK with none of the excess. Just my .02 on the subject.If they discontinue perpendicular Phillips, I'm OK with that. However, I hope they replace it with something other than the corkscrew. I say that not out of hatred for the corkscrew, but simply because there are already a whole bunch of SAKs in almost every layer count that include the corkscrew and I'd like to see a fresh, new idea. Something that works best when on a T handle (and I agree the #2 Phillips doesn't) and, either doesn't require much torque or is designed to tolerate more torque than the Phillips currently does.
I still EDC the Craftsman, but it's not the only knife I own or even the only SAK I own. I'm definitely open to changes and new ideas. I may pick up a Swiss Champ and toss the Craftsman in the closet. Who knows.
Pliers?
No. I don't think the addition of pliers in the SAKs was in response to Leatherman, but I do think the Swiss Tool was. Just my assumption. I haven't looked into it at al.Sent from my iPhone using Tapatalk
-
Given the hook is alive and well, I have a hard time seeing the corkscrew getting fresh competition, simply because it's so iconic. Still, we get 111 mm knives with no back tools in the blade layer now...
As for other tools to put there, that's always fun to to think about. It has to be something low torque, or push/pull. And it should be long term, not linked to some probably short-lived technology. I like the idea of putting a nice, round marlinspike there.
Disclaimer: I like the corkscrew and drink stuff from corked bottles.
Edit: Thinking about, I'd actually love a version of the screwdriver from the Classic as well. My main motivation for carrying a 5+ layer knife is usually getting the fine screwdriver on the back of the saw. A fine screwdriver would be less scary and probably more popular than a marlinspike.
-
For me the in line Phillips is most important. I also carry in pocket , ( usually with a suspension hook ) but more than four layers is for me , uncomfortable .
I do like having a "big tweezer" tool so my solution is a Leatherman P4 in another pocket or a Style PS on the keychain. -
@El Corkscrew said:
The corkscrew hates torque

Sent from my iPhone using TapatalkHow did that happen???
Obviously not opening a bottle of wine...
Of course not, but that question opens the whole can of worms on the obsolescence of the corkscrew or it being a one-trick-pony tool that's useless for anything else.
I rarely drink any alcohol, wine included. So having a corkscrew on a SAK is very much outside my needs. On the rare occasion that a bottle of wine hits the table at Christmas, there's a dedicated corkscrew for that.
I do have a set of mini screwdrivers on my work bench. Still, I could see having one for eye glass repair in a FAK, and for that I'd consider having a SAK with a corkscrew in the FAK (merely to hold the mini screwdriver).
I do agree that the perpendicular screwdriver can't take high torque. I've used it several times. I wouldn't say it can't take ANY torque, though. I guess I'm curious as to what application you guys are putting it to that is so heavy duty that the driver fails. It's not an impact wrench. I'm not sure we should expect it or any SAK tool to tolerate extreme torque.
Oh, BTW, I was using it in conjunction with other tools to try to open a locked door.
Sent from my iPhone using Tapatalk
Well, i can only speak from my experience... Yes for light torque the backside Phillips works fine, but by that i mean taking apart a plastic PC mouse, or a Plastic PC keyboard, tightening a screw on an electrical outlet, or assembly's that doesn't have very tight screws like metal assembly's or even worse, mechanical ones... :-
I messed up my Super Tinker's liner and pin just by undoing like 4 screws that hold the back plate on a PC tower, and they weren't even that tight. Didn't actually ruin it, just bent a little, still worked, but i just didn't trust it any more for that.Personally i honestly don't give much of a damn if the sak has the Phillips or the CS in terms of usage these days as i hardly use either of them. That's why i came up with the SD bit's modification that i posted some time ago. I don'd care if the actual Sak has a great SD in it or not, all i need is the bottle opener and the can opener to drive the bits

Like i've said before, i only like the backside Phillips because it looks good, makes the sak sleeker than the CS, and it's handy but only for very low torque tasks, if you don't want to risk damaging the sak that is...
I also like the CS not because i actually need to use it as a CS since i don't drink wine, and when i occasionally do there is always a CS around. I also like it because it looks equally great and classic there, and it holds the micro SD, and may be handy for a number of other small things apart from the eventual need to open a bottle of wine.And yes, the CS can take as much torque as the Phillips, meaning very little IMO...

But nevertheless, what works for me may not work for others, and what works for others may not work for me, everybody has different tastes and needs

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login