A little Graphics help needed
-
Will you be using them on your pvc dress Tony?

-
That will be just between you and me ;)
-
Nice one Tony. Tofty did a great job on those

Does that mean all future shop projects will now have the official Sparky415 seal of approval?
-
Yes he did

Maybe :D
It seems hard to burn a stamp in to a handle which is what I wanted to try, on curved wood it kinda slides while it is hot and blurs the image
Also I'm not sure how well the stamp will hold up to heating with a blowlamp but it's all an experiment
I need to practice -
Just a thought, Tony. Could you drill a teeny hole through the "1" and put a pin through from the back, just proud of the surface? This will give you a fixed point to rock the stamp around to make sure you get the whole logo branded, without it sliding.
-
Thanks Al,
Not a bad idea
but I think I will try heating and holding the stamp upright in a vice and try rolling the wood across the stamp
-
Alternatively, would it not be an idea to use a drill stand with an electric drill (kept stationary in rotation) and a vice? At least the stamp would be guided vertically, with little sideways play. Start with the object in the vice, heat the stamp and move it down? You may need to fashion something to hold the stamp in the drill chuck...
Sent on my SM-G930F with Tapatalk
-
Thanks DT but I want to get the stamp on to things like axe handles,
so I need to either rock the stamp across the wood which is what I am finding hard to do with out blurring the image
or I need to roll the wood across the stamp which I haven't tried yetSo far I'm experimenting and making it up as I go along :)

-
Ah yes, that might complicate things a tad... and the axe handles are not necessarily separate from the heads, right? If they were one could clamp the hot stamp (requires thermal insulation) in a vice or other clamp preferably with a largish flat surface and roll the handle over it...
Sent on my SM-G930F with Tapatalk
-
@Sparky415 said:
Thanks DT but I want to get the stamp on to things like axe handles,
so I need to either rock the stamp across the wood which is what I am finding hard to do with out blurring the image
or I need to roll the wood across the stamp which I haven't tried yetSo far I'm experimenting and making it up as I go along :)

You could maybe try having the stamp in the drill press vertically, and bring it down on a handle thats on the roller scate roller thing I've seen in one of your piccies, that would roll it evenly without it drifting. I think

-
Kev, You mean my BBQ rotational cutting jig?
:DThanks DT an Kev because I'm going to give those ideas a try

-
You're welcome
Let us know how you fare, would you?Sent on my SM-G930F with Tapatalk
-
@Sparky415 said:
Kev, You mean my BBQ rotational cutting jig?
:DThanks DT an Kev because I'm going to give those ideas a try

Is that what the roller skate thingamy bob is?

-
That look great, I'm jealous! Regarding branding rounded objects I would recommend picking up a length of wooden dowel and just go crazy until you can do it consistently.
-
Thinking about it more, my suggestion won't work because you need the wood to travel across the face of the brand and it won't with the roller in a fixed position.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

