How to replace the blades with the openers elegantly.
-
@Pablo O'Brien said:
@Pablo O'Brien said:
So, update.
The only niggle I have with this mod is the snap on the bottle opener/cap lifter. Its not quite a nail breaker, but its easily two or three times more snappy than a stock configuration. And I believe that this is the reason:
Top is a bottle opener/cap lifter with old type round tang, and corresponding spring.
Middle is a main blade with corresponding spring.
Bottom is a bottle opener/cap lifter with new type square tang(+locking nub), and corresponding spring.Whats happening when I pair the new type bottle opener/cap lifter with a blade spring, is that the square tang is "pushing" out the spring more than it was designed to, when opening, hence the increased snap, if can understand my rambling.

You can see how on the spring for the square tang bottle opener/cap lifter, victorinox has shaped it so that the square tang doesn't push it out too much, and it retains the "just right" amount of snap.How to fix? Well...
You can grind the square tang into a round tang, very much not recommended due to difficulty.
:ahhh
Or grind a curve into the blade spring, not an easy peasy job, but not super duper hard like the above option.
Or use a old style bottle opener/cap lifter.

Or live with it, if its not too bad for you. Thats what I'm doing.
Forgot an option. See in bold.
It helps if you grab the nick as close to the tip as possible, for leverage.A cheap 25 x 762 mm (1x30 inch) belt sander (https://www.machinemart.co.uk/p/scheppach-bts700-belt--disc-sander-230v/ or similar) is perfect for this kind of SAK modding and makes grinding tools a breeze. You can get all sorts of belts in different grits and materials for them. I get mine from: http://stores.ebay.co.uk/abrasivexpertjohnt1102/ - I use the 60 or 80 grit ones for shaping stainless.
-
@Pablo O'Brien said:
@Pablo O'Brien said:
So, update.
The only niggle I have with this mod is the snap on the bottle opener/cap lifter. Its not quite a nail breaker, but its easily two or three times more snappy than a stock configuration. And I believe that this is the reason:
Top is a bottle opener/cap lifter with old type round tang, and corresponding spring.
Middle is a main blade with corresponding spring.
Bottom is a bottle opener/cap lifter with new type square tang(+locking nub), and corresponding spring.Whats happening when I pair the new type bottle opener/cap lifter with a blade spring, is that the square tang is "pushing" out the spring more than it was designed to, when opening, hence the increased snap, if can understand my rambling.

You can see how on the spring for the square tang bottle opener/cap lifter, victorinox has shaped it so that the square tang doesn't push it out too much, and it retains the "just right" amount of snap.How to fix? Well...
You can grind the square tang into a round tang, very much not recommended due to difficulty.
:ahhh
Or grind a curve into the blade spring, not an easy peasy job, but not super duper hard like the above option.
Or use a old style bottle opener/cap lifter.

Or live with it, if its not too bad for you. Thats what I'm doing.
Forgot an option. See in bold.
It helps if you grab the nick as close to the tip as possible, for leverage.A cheap 25 x 762 mm (1x30 inch) belt sander (https://www.machinemart.co.uk/p/scheppach-bts700-belt--disc-sander-230v/ or similar) is perfect for this kind of SAK modding and makes grinding tools a breeze. You can get all sorts of belts in different grits and materials for them. I get mine from: http://stores.ebay.co.uk/abrasivexpertjohnt1102/ - I use the 60 or 80 grit ones for shaping stainless.
Thanks for the tip, I'll consider getting one.

-
LOL - only 85 quids :ahhh
-
-
:P But it really is very useful, and not just for SAK hacking. I miss not having somewhere to use mine.
-
Here's a cheaper solution if you have an electric drill:

-
Heh heh, I've realised that I have those things, for a dremel.

-
@Pablo O'Brien said:
Heh heh, I've realised that I have those things, for a dremel.
Problem solved! We've just saved 85 quids each!

-
@Pablo O'Brien said:

What's the facepalm for? I put the trolly back!
-
@Pablo O'Brien said:
@Pablo O'Brien said:

What's the facepalm for? I put the trolly back!
Oh that's you in the pic, not me?
Everything is fine then.
:DI have no idea what you look like Pabs! If I had to guess though, from the little hints you've dropped here and there:
via Imgflip Meme Generator -
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=magentus link=topic=73874.msg1556410#msg1556410 date=1505911107]
via Imgflip Meme Generator
What's the facepalm for? I put the trolly back!
Oh that's you in the pic, not me?
Everything is fine then.
:DI have no idea what you look like Pabs! If I had to guess though, from the little hints you've dropped here and there:
via Imgflip Meme Generator
[/quote]
Wow... ::) -
@Don Pablo said:
Sorry, all preened up. :(Luckily I still have parts to play with. ;)
Either the can or bottle opener will go in place of the main blade. The problem is that they are tapered on the wrong side, so the small blade will crash into them if you're not careful. The can opener suffers from this problem to a slightly lesser extent, due to being thinner at the tip.
It should work, but I need to confirm.
Basically, do it the same way that Victorinox uses to make the Electrician, which has a sheepsfoot blade opposite the bottle opener?
Spacers on opposite sides. You may need to take a teeny bit off the tip of the blade, but that’s about it. I wonder if you can replace the can opener in the opener layer with a small blade and spacer. -
@Don Pablo said:
@Don Pablo said:
Sorry, all preened up. :(
Luckily I still have parts to play with. ;)
Either the can or bottle opener will go in place of the main blade. The problem is that they are tapered on the wrong side, so the small blade will crash into them if you're not careful. The can opener suffers from this problem to a slightly lesser extent, due to being thinner at the tip.
It should work, but I need to confirm.
Basically, do it the same way that Victorinox uses to make the Electrician, which has a sheepsfoot blade opposite the bottle opener?
Spacers on opposite sides. You may need to take a teeny bit off the tip of the blade, but that’s about it. I wonder if you can replace the can opener in the opener layer with a small blade and spacer.did you just quote yourself, giving instructions to your past you, from eight months in the future?
??? -
@Don Pablo said:
@Don Pablo said:
Sorry, all preened up. :(
Luckily I still have parts to play with. ;)
Either the can or bottle opener will go in place of the main blade. The problem is that they are tapered on the wrong side, so the small blade will crash into them if you're not careful. The can opener suffers from this problem to a slightly lesser extent, due to being thinner at the tip.
It should work, but I need to confirm.
Basically, do it the same way that Victorinox uses to make the Electrician, which has a sheepsfoot blade opposite the bottle opener?
Spacers on opposite sides. You may need to take a teeny bit off the tip of the blade, but that’s about it. I wonder if you can replace the can opener in the opener layer with a small blade and spacer.did you just quote yourself, giving instructions to your past you, from eight months in the future?
???Correct!

That young ‘un from 8 months ago needs a talking to.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login