What did you use your Leatherman for today?
-
Well...I'm on the dry dock , so normal shipyard smurf


Sent from my SM-A310F using Tapatalk
-
Great uses and pics guys

-
Use Epic Can Opener , Open Packed today



-
That is a mean looking can opener you have there

Sent on my SM-G930F with Tapatalk
-
Yesterday evening I used my PST to open a package from Amazon. As you can see, my trusty Beagle "Scout" (both the Thundah, and the Beagle, in ThundahBeagle) was on-hand to inspect the contents.
While I have purchased a number of new Leatherman tools, they were all gifts for others. Every one I have owned has been pre-owned. This is my first new Leatherman I have purchased for myself. The Rebar.
Um, that's eight.
-
Doing some debris removal from Hurricane Irma (finally removed the downed tree from my yard) and I used my Sidekick to remove a couple of dozen sticker burrs from my socks and shoe laces. It was a lot better than pricking my fingers on the damn things which are very sharp, and the spring assisted pliers made easy work of it.
-
@Alan K. said:
Doing some debris removal from Hurricane Irma (finally removed the downed tree from my yard) and I used my Sidekick to remove a couple of dozen sticker burrs from my socks and shoe laces. It was a lot better than pricking my fingers on the damn things which are very sharp, and the spring assisted pliers made easy work of it.How is the damage down there Alan? I know you can see it on TV but you would give a better perspective on it vs.the media

-
Today I used the modified pry bar (ex screwdriver, large) of my ST 300 VX to remove a reluctant wiper blade.

Sent on my SM-G930F with Tapatalk
-
Not today, but the other day at work I used the awl on my Rebar to push the tab down on some zip ties so they could be removed and re-used. They were holding up some signs on a construction fence that were in our line of sight for laying out a townhouse.
-
food prep

-
@ThePeacent said:
food prep
Hahahaha! Best use of MT's I've ever seen

-
Day two and I had the Surge out a lot today. Before work I tightened up a sliding door handle that I noticed was getting loose when I left the pupper out. And at work used the excellent wire cutters, pliers, and knife!

-
Needed a fine file to work on my new little project,
JR
-
@MadPlumbarian said:
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
-
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
Yes, it’s a led light kit, you can get them online or at a store, but that’s just the led's, I got mine at amazon, it has a little control box to control the brightness. As for that arch, it’s a cheap $2 curtain rod kit, that are like |—�-| but are adjustable, I calculated how long it would have to be in order to make the arch for what size table then took a couple small plastic pieces and riveted the two of them together then bent it, luckily there a piece playground equipment just the size I was looking for, so I bent it around that, put the lighting on, they have a sticky tape backside, they put it on my workstation, plugged it in and turned it on.
The unique thing is how it works, I work on models, and need good light, and with a normal light kinda like the one you can see in the background, yeah it’s a mag light, but when you start moving your hands around they start to make shadows, so you end up having to move things around including your head to try to see, being an arch, it transmits light form every angle, no shadows even if you put your hand directly above the piece of work! When I made the light I put the project on here somewhere, look up like led arch light? If any other questions as away,
JR -
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
Yes, it’s a led light kit, you can get them online or at a store, but that’s just the led's, I got mine at amazon, it has a little control box to control the brightness. As for that arch, it’s a cheap $2 curtain rod kit, that are like |—-| but are adjustable, I calculated how long it would have to be in order to make the arch for what size table then took a couple small plastic pieces and riveted the two of them together then bent it, luckily there a piece playground equipment just the size I was looking for, so I bent it around that, put the lighting on, they have a sticky tape backside, they put it on my workstation, plugged it in and turned it on.
The unique thing is how it works, I work on models, and need good light, and with a normal light kinda like the one you can see in the background, yeah it’s a mag light, but when you start moving your hands around they start to make shadows, so you end up having to move things around including your head to try to see, being an arch, it transmits light form every angle, no shadows even if you put your hand directly above the piece of work! When I made the light I put the project on here somewhere, look up like led arch light? If any other questions as away,
JRThanks! I have some of the modeling problems you describe when working on LMs and this looks like a solution I could adopt or adapt...

Sent on my SM-G930F with Tapatalk
-
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
Yes, it’s a led light kit, you can get them online or at a store, but that’s just the led's, I got mine at amazon, it has a little control box to control the brightness. As for that arch, it’s a cheap $2 curtain rod kit, that are like |—-| but are adjustable, I calculated how long it would have to be in order to make the arch for what size table then took a couple small plastic pieces and riveted the two of them together then bent it, luckily there a piece playground equipment just the size I was looking for, so I bent it around that, put the lighting on, they have a sticky tape backside, they put it on my workstation, plugged it in and turned it on.
The unique thing is how it works, I work on models, and need good light, and with a normal light kinda like the one you can see in the background, yeah it’s a mag light, but when you start moving your hands around they start to make shadows, so you end up having to move things around including your head to try to see, being an arch, it transmits light form every angle, no shadows even if you put your hand directly above the piece of work! When I made the light I put the project on here somewhere, look up like led arch light? If any other questions as away,
JRThanks! I have some of the modeling problems you describe when working on LMs and this looks like a solution I could adopt or adapt...

Sent on my SM-G930F with Tapatalk
Well here’s the difference, I threw a LM on the table so you could really understand. lol..
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
