What did you use your Leatherman for today?
-
food prep

-
@ThePeacent said:
food prep
Hahahaha! Best use of MT's I've ever seen

-
Day two and I had the Surge out a lot today. Before work I tightened up a sliding door handle that I noticed was getting loose when I left the pupper out. And at work used the excellent wire cutters, pliers, and knife!

-
Needed a fine file to work on my new little project,
JR
-
@MadPlumbarian said:
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
-
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
Yes, it’s a led light kit, you can get them online or at a store, but that’s just the led's, I got mine at amazon, it has a little control box to control the brightness. As for that arch, it’s a cheap $2 curtain rod kit, that are like |—�-| but are adjustable, I calculated how long it would have to be in order to make the arch for what size table then took a couple small plastic pieces and riveted the two of them together then bent it, luckily there a piece playground equipment just the size I was looking for, so I bent it around that, put the lighting on, they have a sticky tape backside, they put it on my workstation, plugged it in and turned it on.
The unique thing is how it works, I work on models, and need good light, and with a normal light kinda like the one you can see in the background, yeah it’s a mag light, but when you start moving your hands around they start to make shadows, so you end up having to move things around including your head to try to see, being an arch, it transmits light form every angle, no shadows even if you put your hand directly above the piece of work! When I made the light I put the project on here somewhere, look up like led arch light? If any other questions as away,
JR -
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
Yes, it’s a led light kit, you can get them online or at a store, but that’s just the led's, I got mine at amazon, it has a little control box to control the brightness. As for that arch, it’s a cheap $2 curtain rod kit, that are like |—-| but are adjustable, I calculated how long it would have to be in order to make the arch for what size table then took a couple small plastic pieces and riveted the two of them together then bent it, luckily there a piece playground equipment just the size I was looking for, so I bent it around that, put the lighting on, they have a sticky tape backside, they put it on my workstation, plugged it in and turned it on.
The unique thing is how it works, I work on models, and need good light, and with a normal light kinda like the one you can see in the background, yeah it’s a mag light, but when you start moving your hands around they start to make shadows, so you end up having to move things around including your head to try to see, being an arch, it transmits light form every angle, no shadows even if you put your hand directly above the piece of work! When I made the light I put the project on here somewhere, look up like led arch light? If any other questions as away,
JRThanks! I have some of the modeling problems you describe when working on LMs and this looks like a solution I could adopt or adapt...

Sent on my SM-G930F with Tapatalk
-
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
Yes, it’s a led light kit, you can get them online or at a store, but that’s just the led's, I got mine at amazon, it has a little control box to control the brightness. As for that arch, it’s a cheap $2 curtain rod kit, that are like |—-| but are adjustable, I calculated how long it would have to be in order to make the arch for what size table then took a couple small plastic pieces and riveted the two of them together then bent it, luckily there a piece playground equipment just the size I was looking for, so I bent it around that, put the lighting on, they have a sticky tape backside, they put it on my workstation, plugged it in and turned it on.
The unique thing is how it works, I work on models, and need good light, and with a normal light kinda like the one you can see in the background, yeah it’s a mag light, but when you start moving your hands around they start to make shadows, so you end up having to move things around including your head to try to see, being an arch, it transmits light form every angle, no shadows even if you put your hand directly above the piece of work! When I made the light I put the project on here somewhere, look up like led arch light? If any other questions as away,
JRThanks! I have some of the modeling problems you describe when working on LMs and this looks like a solution I could adopt or adapt...

Sent on my SM-G930F with Tapatalk
Well here’s the difference, I threw a LM on the table so you could really understand. lol..
JR
-
[quote author=MadPlumbarian link=topic=37474.msg1561535#msg1561535 date=1506734428]
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
Yes, it’s a led light kit, you can get them online or at a store, but that’s just the led's, I got mine at amazon, it has a little control box to control the brightness. As for that arch, it’s a cheap $2 curtain rod kit, that are like |—-| but are adjustable, I calculated how long it would have to be in order to make the arch for what size table then took a couple small plastic pieces and riveted the two of them together then bent it, luckily there a piece playground equipment just the size I was looking for, so I bent it around that, put the lighting on, they have a sticky tape backside, they put it on my workstation, plugged it in and turned it on.
The unique thing is how it works, I work on models, and need good light, and with a normal light kinda like the one you can see in the background, yeah it’s a mag light, but when you start moving your hands around they start to make shadows, so you end up having to move things around including your head to try to see, being an arch, it transmits light form every angle, no shadows even if you put your hand directly above the piece of work! When I made the light I put the project on here somewhere, look up like led arch light? If any other questions as away,
JRThanks! I have some of the modeling problems you describe when working on LMs and this looks like a solution I could adopt or adapt...

Sent on my SM-G930F with Tapatalk
Well here’s the difference, I threw a LM on the table so you could really understand. lol..
JR
[/quote]A very pictorial illustration of the powers of your lighting system. I am convinced, or rather converted
Sent on my SM-G930F with Tapatalk
-
[quote author=Dutch_Tooler link=topic=37474.msg1561688#msg1561688 date=1506777674]
[quote author=MadPlumbarian link=topic=37474.msg1561535#msg1561535 date=1506734428]
Needed a fine file to work on my new little project,
JRLike the lighting setup - LEDs? Source(s)? Thanks in advance
Sent on my SM-G930F with Tapatalk
Yes, it’s a led light kit, you can get them online or at a store, but that’s just the led's, I got mine at amazon, it has a little control box to control the brightness. As for that arch, it’s a cheap $2 curtain rod kit, that are like |—-| but are adjustable, I calculated how long it would have to be in order to make the arch for what size table then took a couple small plastic pieces and riveted the two of them together then bent it, luckily there a piece playground equipment just the size I was looking for, so I bent it around that, put the lighting on, they have a sticky tape backside, they put it on my workstation, plugged it in and turned it on.
The unique thing is how it works, I work on models, and need good light, and with a normal light kinda like the one you can see in the background, yeah it’s a mag light, but when you start moving your hands around they start to make shadows, so you end up having to move things around including your head to try to see, being an arch, it transmits light form every angle, no shadows even if you put your hand directly above the piece of work! When I made the light I put the project on here somewhere, look up like led arch light? If any other questions as away,
JRThanks! I have some of the modeling problems you describe when working on LMs and this looks like a solution I could adopt or adapt...

Sent on my SM-G930F with Tapatalk
Well here’s the difference, I threw a LM on the table so you could really understand. lol..
JR
[/quote]A very pictorial illustration of the powers of your lighting system. I am convinced, or rather converted
Sent on my SM-G930F with Tapatalk
[/quote]
lol, any questions don’t hesitate,
JR -
... well, as a subject of a further mod of course!
/topic/73762

Sent on my SM-G930F with Tapatalk
-
And again... see thread linked above.
Sent on my SM-G930F with Tapatalk
-
Used the file on my PS4 to clean up the threads on a sink drain fitting at my wife's office, to replace the P-trap. Old drain fitting had a slow leak, and rusted completed off the sink before they caught it. PS4 cleaned up the threads nicely!
-
Spent a vacation in Turkey last week and since I love coffee I brought a can of it with me home. When I attempted to open it the handle ring broke and I used pliers to open the can. Wave did great of course, yet the coffee might be way better [emoji23]. Sorry, forgot to take any pics [emoji880]
-
But without a pic this did not happen! :ahhh
-
Needed to remove the bottom panel on my wife's laptop (internal battery wasn't working). Most of the screws were torx 6, but one tiny one in the centre of the case was much smaller --- so to the rescue comes my modded Juice with the small bit cross-head driver.
Re-seated the connectors from the battery and it works again. Job done.

-
Way to go

Love that mod
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

