Surge EDC Practicality
-
Came home from work tonight to a package on the table. The Surge has arrived! It's not as big, bulky or heavy as I was anticipating. I'm super stoked to start carrying it. I have already hit the garage and found an old bit kit in a non used toolbox that i will take to work tomorrow and give it a work over in the grinding room to accessorize my new Surge. The only confusion I had from the purchase was the model number. They advertised 830160 and I received 830859. I think it is just a matter of the sheath but I asked the seller anyhow. It is definite the newer model and not old stock. Glad to be part of the Surge Owners Club!
-
Congrats man!
-
@ducttapetech said:
Congrats man!+1

-
New page banana man dance

-
@LoopCutter said:
I have been considering a Surge since all new discussions and challenges.
Yet, have one question, maybe two.
If I understand correctly, the file and saw are interchangeable to the same exchange fitting?If that is correct, are there different files types that are made as the saw blades?
For a larger MT I use and find the ST300 fits many of my needs, I also, use my Rebar for smaller jobs and when I need the added SEX appeal a Rebar has. Yet, of late, my Wave sees EDC work duty, for the file, both sides as required for rough and or fine work. And, the saw for fitting plastic conduit and cleaning edges on broken wood pieces. The OH blade compliment as well is handy why the Surge interest, if I can have it all in the bigger package.
Sent from my iPhone using Tapatalk
Yes, the file and saw are interchangeable
They only make the one file for it but it is the same type as the Wave file
It will take t-shank saws as well and I have a couple of those with me as well when I carry
Never used them but I have them :D It comes with a small sleeve to house them in that slips into the extra pocket of the sheath as well 
-
@Yontz said:
Came home from work tonight to a package on the table. The Surge has arrived! It's not as big, bulky or heavy as I was anticipating. I'm super stoked to start carrying it. I have already hit the garage and found an old bit kit in a non used toolbox that i will take to work tomorrow and give it a work over in the grinding room to accessorize my new Surge. The only confusion I had from the purchase was the model number. They advertised 830160 and I received 830859. I think it is just a matter of the sheath but I asked the seller anyhow. It is definite the newer model and not old stock. Glad to be part of the Surge Owners Club!Can't wait to hear your thoughts on it after some use and congrats on it
Also can't wait to see what kind of bit mods you have in mind

-
Congrats on the Surge, they are a great tool. After a few hours you won't even notice it on your belt. I carried one for years with the full bit kit, saw blades, 1/4" drive ratchet, and extension. The combination pulled me out the mire many times over the years I daily carried it.
I'd recommend a good moly sheath like a skinth, or a good leather sheath like Gohard makes (depends on your material preference). The stock leatherman ones don't last long nowadays, though I did find the nylon lasted longer than their moly ones.
A couple of fine tooth jigsaw blades are always worth carrying as well. They will save you a walk to go get a saw.
-
very nice EDC food prep tool, as the blade is sharp and thin and slices like it's nobody's business allowing for precise, clean cuts

-
@ThePeacent said:
very nice EDC food prep tool, as the blade is sharp and thin and slices like it's nobody's business allowing for precise, clean cuts
That edc combo is serious stuff! If I were a tougher man, that is similar to what I would EDC. The BN 600 is fantastic for twisting heavy bailing wires and as a secondary pliar for bolts.
I would drop the micra and sak on the key chain. Instead I'd have a sak explorer in a pocket for fine scissors, grooming, etc. I use the loop often too. But, the Surge, mp600 bn, big knife, and compact light would be all ya ever needed.
-
very nice EDC food prep tool, as the blade is sharp and thin and slices like it's nobody's business allowing for precise, clean cuts

That edc combo is serious stuff! If I were a tougher man, that is similar to what I would EDC. The BN 600 is fantastic for twisting heavy bailing wires and as a secondary pliar for bolts.
I would drop the micra and sak on the key chain. Instead I'd have a sak explorer in a pocket for fine scissors, grooming, etc. I use the loop often too. But, the Surge, mp600 bn, big knife, and compact light would be all ya ever needed.
I admittedly like to be overprepared and carry lots of my toys. These for the upcoming weekend:

-
very nice EDC food prep tool, as the blade is sharp and thin and slices like it's nobody's business allowing for precise, clean cuts

That edc combo is serious stuff! If I were a tougher man, that is similar to what I would EDC. The BN 600 is fantastic for twisting heavy bailing wires and as a secondary pliar for bolts.
I would drop the micra and sak on the key chain. Instead I'd have a sak explorer in a pocket for fine scissors, grooming, etc. I use the loop often too. But, the Surge, mp600 bn, big knife, and compact light would be all ya ever needed.
I admittedly like to be overprepared and carry lots of my toys. These for the upcoming weekend:

My poor Rambler is feeling inadequate now.

Now I have to repair it's self esteem. -
I would not have buyers remorse! I would not worry if it is too big for some folks, but is it too big for you? I sometimes carry a Surge and it happily sits in a sheath on my belt. Right next to it is an LG V10 mobile phone in a Maxepedition holster. I do not even notice it is there! I prefer a larger multitool and do not care about how much it weighs. I actually even prefer a heavier tool. For some reason, it just gives me a feeling of confidence in it!! >:D :D
-
Day two of carry and I have no issues at all. The only time I notice its there is when I undo my belt :o ! I even used it this morning to tighten the handle on the sunroom door, open some packages at work and used the pliers to hold an a threaded insert. So far loving it.
-
@Yontz said:
Day two of carry and I have no issues at all. The only time I notice its there is when I undo my belt :o ! I even used it this morning to tighten the handle on the sunroom door, open some packages at work and used the pliers to hold an a threaded insert. So far loving it.That THUD when your pants hits the floor

Honey are you ok? Yes, that my SURGE hitting the floor not me

-
I know that scenario

-
Congrats!! Glad your diggin it!
-
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!

-
@an0nemus said:
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!
There is a pocket clip for it.

But, you'd need carbide liners to protect your pockets. :D
My work jeans have a leather tape measure place on the pocket and I think that would work in all seriousness. But, at my job, I am allowed to carry anything I want. My bosssaid I could carry a belt covered in knives, MTs, and tools if I needed them(I will test his resolve one day and post pics!.----I'm Batman.

-
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!

There is a pocket clip for it.

But, you'd need carbide liners to protect your pockets. :D
My work jeans have a leather tape measure place on the pocket and I think that would work in all seriousness. But, at my job, I am allowed to carry anything I want. My bosssaid I could carry a belt covered in knives, MTs, and tools if I needed them(I will test his resolve one day and post pics!.----I'm Batman.

Went to work for several weeks with my Charge clipped inside my waistband [emoji3]
But since I work in an office environment with sheeples around, a Surge on my side will cost me my job [emoji3]
-
If I could belt-carry a tool at work, I'd carry a Surge! Congrats and enjoy!

There is a pocket clip for it.

But, you'd need carbide liners to protect your pockets. :D
My work jeans have a leather tape measure place on the pocket and I think that would work in all seriousness. But, at my job, I am allowed to carry anything I want. My bosssaid I could carry a belt covered in knives, MTs, and tools if I needed them(I will test his resolve one day and post pics!.----I'm Batman.

Went to work for several weeks with my Charge clipped inside my waistband [emoji3]
But since I work in an office environment with sheeples around, a Surge on my side will cost me my job [emoji3]
Carry it on a murse, shoulder bag or BOB then


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login